| View previous topic :: View next topic |
| Author |
Message |
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
 Posted: Thu Jan 19, 2006 8:22 pm Post subject: Scalo o non scalo? ora scalo ma per finta |
 |
|
Ciao ragazzi  non riesco a capire il perchè quando il pc è sotto stress dopo un po' il processore passa da 1800mhz a 600mhz e non riesco ad aumentare lo scaling a mano.
| Code: | DeviantLife ~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.80GHz
stepping : 6
cpu MHz : 599.687
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips : 1205.92
DeviantLife ~ #
|
Ora provo a installare lmsensors ma la temperatura non è esageratamente alta.
EDIT:
è pazzesco le velocità del mio processore viaggiano da 600 a 1800 con un passo di 200mhz (600 - 800 - 1000 etc) mi ritrovo che se dalla barra di gnome setto 600 mhz mi porta il processore a 199mhz qualcosa non qudra proprio
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD
Last edited by koma on Wed Jun 14, 2006 10:03 am; edited 2 times in total |
|
| Back to top |
|
 |
SilverXXX
l33t
Joined: 18 Sep 2004
Posts: 885
|
| Posted: Fri Jan 20, 2006 11:04 am Post subject: |
|
|
Potrebbe essere che si scalda troppo e per stare sicuro abbassa?
_________________
about:mozilla |
|
| Back to top |
|
|
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
| Posted: Fri Jan 20, 2006 2:23 pm Post subject: |
|
|
può essere erò con winzozz non capita... ora sto provando a settare ocn lmsensors le ventole a un maggiore rpm... se solo :
| Code: | Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
|
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD |
|
| Back to top |
|
|
neryo
Veteran
Joined: 09 Oct 2004
Posts: 1292
Location: Ferrara, Italy, Europe
|
| Posted: Fri Jan 20, 2006 5:13 pm Post subject: |
|
|
se tu disabiliti nel kernel il frequency scaling?
_________________
cache: a safe place for hiding or storing things..
D-link DWL-G650 AirPlus
Apache Php Mysql |
|
| Back to top |
|
|
Ic3M4n
Advocate
Joined: 02 Nov 2004
Posts: 3489
Location: Bergamo.
|
| Posted: Fri Jan 20, 2006 7:21 pm Post subject: |
|
|
beh... non è il massimo disabilitare il frequency scaling. potresti avere dei problemi di surriscaldamento.
cmq avevo letto nel forum un po' di tempo fa che su alcuni computer era necessario modificare la tabella delle partizioni per via del bios bacato ed impostarne di nuove a manina. potresti rientrare in questo caso, anche se mi pare sia passato un po' di tempo da quando avevo letto la notizia. |
|
| Back to top |
|
|
.:deadhead:.
Advocate
Joined: 25 Nov 2003
Posts: 2963
Location: Milano, Italy
|
|
| Back to top |
|
|
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
| Posted: Sat Jan 21, 2006 11:21 am Post subject: |
|
|
come dice lc3man non è il caso di disabilitate il CPUFS, comunque il blocco di frequenza è abbastanza aribritrario se riferito alla temperatura della cpu, purtroppo non riesco a installare lm_sensors ed avere altri dati su questo "surriscaldamento"
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD |
|
| Back to top |
|
|
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
| Posted: Sat Jan 21, 2006 11:43 am Post subject: |
|
|
sto provando a compilare con il dsdt personalizzato ma mi da sempre errore...:
| Code: | /DSDT/dell.asl:2020: error: redefinition of `Device'
/DSDT/dell.asl:1993: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2021: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2021: error: `Zero' undeclared (first use in this function)
/DSDT/dell.asl:2022: error: syntax error before "Device"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2029: warning: return type defaults to `int'
/DSDT/dell.asl:2029: warning: function declaration isn't a prototype
/DSDT/dell.asl:2029: error: redefinition of `Device'
/DSDT/dell.asl:2020: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2030: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2031: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2037: warning: return type defaults to `int'
/DSDT/dell.asl:2037: warning: function declaration isn't a prototype
/DSDT/dell.asl:2037: error: redefinition of `Device'
/DSDT/dell.asl:2029: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2038: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2039: error: syntax error before "Method"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2048: error: syntax error before '{' token
/DSDT/dell.asl:2053: error: syntax error before numeric constant
/DSDT/dell.asl:2054: error: syntax error before numeric constant
/DSDT/dell.asl:2055: error: syntax error before '(' token
/DSDT/dell.asl:2056: warning: return type defaults to `int'
/DSDT/dell.asl:2056: warning: function declaration isn't a prototype
/DSDT/dell.asl:2056: error: redefinition of `Name'
/DSDT/dell.asl:2010: error: `Name' previously defined here
/DSDT/dell.asl: In function `Name':
/DSDT/dell.asl:2059: error: `One' undeclared (first use in this function)
/DSDT/dell.asl:2059: warning: left-hand operand of comma expression has no effect
/DSDT/dell.asl:2059: error: syntax error before '}' token
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2066: warning: return type defaults to `int'
/DSDT/dell.asl:2066: warning: function declaration isn't a prototype
/DSDT/dell.asl:2066: error: redefinition of `Device'
/DSDT/dell.asl:2037: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2067: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2067: error: `Zero' undeclared (first use in this function)
/DSDT/dell.asl:2068: error: syntax error before "Device"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2075: warning: return type defaults to `int'
/DSDT/dell.asl:2075: warning: function declaration isn't a prototype
/DSDT/dell.asl:2075: error: redefinition of `Device'
/DSDT/dell.asl:2066: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2076: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2077: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2081: warning: return type defaults to `int'
/DSDT/dell.asl:2081: warning: function declaration isn't a prototype
/DSDT/dell.asl:2081: error: redefinition of `Device'
/DSDT/dell.asl:2075: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2082: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2083: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2087: warning: return type defaults to `int'
/DSDT/dell.asl:2087: warning: function declaration isn't a prototype
/DSDT/dell.asl:2087: error: redefinition of `Device'
/DSDT/dell.asl:2081: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2088: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2089: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2093: warning: return type defaults to `int'
/DSDT/dell.asl:2093: warning: function declaration isn't a prototype
/DSDT/dell.asl:2093: error: redefinition of `Device'
/DSDT/dell.asl:2087: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2094: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2095: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2099: warning: return type defaults to `int'
/DSDT/dell.asl:2099: warning: function declaration isn't a prototype
/DSDT/dell.asl:2099: error: redefinition of `Device'
/DSDT/dell.asl:2093: error: `Device' previously defined here
/DSDT/dell.asl: In function `Device':
/DSDT/dell.asl:2100: error: `_ADR' undeclared (first use in this function)
/DSDT/dell.asl:2101: error: syntax error before "Name"
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2106: error: stray '\' in program
/DSDT/dell.asl:2107: warning: return type defaults to `int'
/DSDT/dell.asl:2107: warning: function declaration isn't a prototype
/DSDT/dell.asl:2107: error: redefinition of `Scope'
/DSDT/dell.asl:1171: error: `Scope' previously defined here
/DSDT/dell.asl:2110: error: syntax error before '(' token
/DSDT/dell.asl:2111: warning: return type defaults to `int'
/DSDT/dell.asl:2111: warning: function declaration isn't a prototype
/DSDT/dell.asl:2111: error: redefinition of `Name'
/DSDT/dell.asl:2056: error: `Name' previously defined here
/DSDT/dell.asl: In function `Name':
/DSDT/dell.asl:2113: error: syntax error before '{' token
/DSDT/dell.asl: At top level:
/DSDT/dell.asl:2198: error: syntax error before '.' token
|
e questo è un cut mi sa che sbaglio io qualcosa
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD |
|
| Back to top |
|
|
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
| Posted: Sat Jan 21, 2006 4:55 pm Post subject: |
|
|
La risoluzione infine:
La mia mente oggi vagava e pensava cosa avevo installato prima che ora non ho e che differenza c'è tra la mia precedente versioen di gentoo e codesta?
La versione dei programmi? uhm ma di solito si programma per migliorare non peggiorare... chi programmerà mai per peggiorare o comunque per rendere più complesse le cose...
LA DELL
Ma certo! il bios!
Downgrading A16 -> A15
Cpu thermal: 75C° (ok un po' alta ma per un case in plastica e metallo non è male tenendo presente che ha una sola ventola e mal posizionata)
Processore 1800mhz -> scaling funzionale
Tutto funziona
Maledetto bios di M)/&(%/&£$%
 Solved
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD |
|
| Back to top |
|
|
koma
Advocate
Joined: 06 Jun 2003
Posts: 2702
Location: Italy
|
| Posted: Wed Jun 14, 2006 10:01 am Post subject: |
|
|
Bene in effetti il processore non scala indietro... in questi giorni sto facendo un revdep perchè sto upgradando il gcc di 180 pacchetti in un'intera notte ne ha fatti 8 (ricordo che è un centrino 1800 con 1 gb di ram) per paura del surriscaldamento ho comprato un tappetino con ventole da mettere sotto ma nulla niente che aiuti.
Io non capisco se il processore fosse "andato" non compilerebbe! darebbe errori così come a ram.
Non riesco a spiegarmi questa situazione
_________________
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD |
|
| Back to top |
|
|
MeMyselfAndI
l33t
Joined: 15 Nov 2005
Posts: 784
Location: Between the monitor and the chair
|
| Posted: Wed Jun 14, 2006 12:27 pm Post subject: |
|
|
| io non ho mica capito l'ultimo post... |
|
| Back to top |
|
|
|
Forum italiano (Italian)
