| View previous topic :: View next topic |
| Author |
Message |
Flameeyes
Retired Dev
Joined: 30 Mar 2005
Posts: 189
Location: London, Europe
|
 Posted: Sat Jun 03, 2006 11:18 pm Post subject: |
 |
|
| Make sure you rebuilt kdelibs after qt. |
|
| Back to top |
|
 |
agrippa_cash
Tux's lil' helper
Joined: 08 May 2003
Posts: 143
Location: Los Angeles
|
| Posted: Sun Jun 04, 2006 1:11 am Post subject: |
|
|
Thanks flameeyes but I just tried again to be sure. If someone else is having this problem the bug is (apparently) detailed here https://bugs.gentoo.org/show_bug.cgi?id=81066
-----------------------------------------------------
I believe my problem was caused my the Samsung version of libqt-mt sitting in my /usr/lib, and the symlinks that I set up so the printer could find qt. I had dismissed the possibility of this being the problem because I had uneventfully upgraded qt and some kde apps since installing the printer, but removing the file and links allowed me to compile kdebase-meta.
_________________
Athlon xp 1700+;VIA-KT266;512mb RAM;Radeon 9600
-running with udev, hal, dbus, pmount & modular-xorg
Last edited by agrippa_cash on Mon Jun 05, 2006 3:55 pm; edited 1 time in total |
|
| Back to top |
|
|
yngwin
Retired Dev
Joined: 19 Dec 2002
Posts: 4572
Location: Suzhou, China
|
| Posted: Sun Jun 04, 2006 10:37 am Post subject: |
|
|
OK, I deleted the kde.eclass from the (perrty, I think) overlay and added the suse dynsort patch to the binutils ebuild from flameeyes' overlay. I re-emerged most dependancies, including qt, and then kdelibs and kicker emerged fine with hidden visibility and --as-needed. I'm now emerging/updating the rest of kde 3.5.3. So far, so good.
_________________
"Those who deny freedom to others deserve it not for themselves." - Abraham Lincoln
Free Culture | Defective by Design | EFF |
|
| Back to top |
|
|
Tolstoi
l33t
Joined: 20 May 2004
Posts: 678
|
| Posted: Sun Jun 04, 2006 2:46 pm Post subject: |
|
|
| Tolstoi wrote: | What works for me is an " emerge -a [package-name]-3.5.3 " . It's ok for me, because I don't want all the stuff. So far everything compiles fine (hopefully)  . |
I have to correct this a little. After a new sync I made a simple "emerge -a =kde-3.5.3" and all went fine over night. The packages I had already emerged had to be removed cause they where
blocking. But know I have all the stuff - uugh! |
|
| Back to top |
|
|
deviljelly
Apprentice
Joined: 19 Feb 2003
Posts: 193
Location: Netherlands
|
| Posted: Wed Jun 07, 2006 8:38 pm Post subject: |
|
|
Chaps,
I had the same issue, I tried most of the suggested ideas over the course of 2 days, none worked for me. Looking at the first entry in emerge.log I realised that the install on my ThinkPad was nearly 2 years old, so I bit the bullet and wiped the hard disk.
The install was smooth, upgraded to gcc 4.1.1 and expat 2.0 as soon as I could, backfixed libexpat.so.0 and continued to install KDE 3.5.3, which went without a hitch with hidden visibilty.
It feels so much faster, I'm sure most of this is because of the fresh install, I also mounted a 2G usb flash drive at /usr/portage/distfiles to try and make sure that reiserfs would have the opportunity to place most of the new system/xorg/kde files close to each other at the beginning of the disk, I'm not quite sure if this made a difference but it felt good
So, if you hit a brick wall with this problem try staring from scratch.
(I also swapped -Os for -O3 and took off tree-vectorize from my CFLAGS) |
|
| Back to top |
|
|
KD-120RD
Tux's lil' helper
Joined: 07 Mar 2004
Posts: 149
Location: Hamburg
|
| Posted: Wed Jun 07, 2006 10:00 pm Post subject: |
|
|
I discoverd that my errors where due to a broken ram module. 
Now everything compiles fine again. |
|
| Back to top |
|
|
Braempje
l33t
Joined: 31 Jan 2003
Posts: 748
|
|
| Back to top |
|
|
mmiller0521
Tux's lil' helper
Joined: 26 Aug 2005
Posts: 77
|
| Posted: Thu Jun 08, 2006 10:56 pm Post subject: |
|
|
| I run a stable x86 system but I want the newest KDE, can someone tell me what to do so I can get the newest KDE and all its dependencies, without going totally ~x86... unless of course you tell me its fine to go ~x86... thanks! |
|
| Back to top |
|
|
micmac
l33t
Joined: 28 Nov 2003
Posts: 996
|
| Posted: Sat Jun 10, 2006 3:54 pm Post subject: |
|
|
Like this:
| Code: |
=kde-base/ark-3.5.3
=kde-base/certmanager-3.5.3
=kde-base/kcalc-3.5.3
=kde-base/kcminit-3.5.3
=kde-base/kcontrol-3.5.3
=kde-base/kdebase-data-3.5.3
=kde-base/kdebase-kioslaves-3.5.3
=kde-base/kdebase-startkde-3.5.3
=kde-base/kde-i18n-3.5.3
=kde-base/kdelibs-3.5.3-r1
=kde-base/kdepasswd-3.5.3
=kde-base/kdepim-kioslaves-3.5.3
=kde-base/kdeprint-3.5.3
=kde-base/kdesktop-3.5.3
=kde-base/kdesu-3.5.3
=kde-base/kdialog-3.5.3
=kde-base/kdm-3.5.3
=kde-base/kfind-3.5.3
=kde-base/kghostview-3.5.3
=kde-base/khelpcenter-3.5.3
=kde-base/khotkeys-3.5.3
=kde-base/kicker-3.5.3
=kde-base/kmail-3.5.3
=kde-base/kmenuedit-3.5.3
=kde-base/konqueror-3.5.3
=kde-base/konsole-3.5.3
=kde-base/kontact-3.5.3
=kde-base/kpdf-3.5.3
=kde-base/kpersonalizer-3.5.3
=kde-base/ksmserver-3.5.3
=kde-base/ksplashml-3.5.3
=kde-base/ktnef-3.5.3
=kde-base/kview-3.5.3
=kde-base/kwalletmanager-3.5.3
=kde-base/kwin-3.5.3
=kde-base/libkcal-3.5.3
=kde-base/libkdenetwork-3.5.3
=kde-base/libkdepim-3.5.3
=kde-base/libkmime-3.5.3
=kde-base/libkonq-3.5.3
=kde-base/libkpgp-3.5.3
=kde-base/libkpimidentities-3.5.3
=kde-base/mimelib-3.5.3
|
Put it in /etc/portage/package.keywords. Check the portage man page.
mic |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Sat Jun 10, 2006 5:20 pm Post subject: |
|
|
Has anyone gotten the new Cups v1.2.1 to work with the KDE Printer Manager in the Control Center? If so, how? Supposedly this version of KDE has patches added to fix the Cups backend issues with 1.2.
Cheers
_________________
Nothing to read in this sig. Move along. |
|
| Back to top |
|
|
roderick
l33t
Joined: 11 Jul 2005
Posts: 908
Location: St. John's, NL CANADA
|
| Posted: Sat Jun 10, 2006 10:35 pm Post subject: |
|
|
| StifflerStealth wrote: | Has anyone gotten the new Cups v1.2.1 to work with the KDE Printer Manager in the Control Center? If so, how? Supposedly this version of KDE has patches added to fix the Cups backend issues with 1.2.
Cheers |
If you are using pertty, make sure kdelibs is compiled with the patches. It may not be.
_________________
If God were a pickle, I'd still say "no pickle on my burger".
http://roderick-greening.blogspot.com/ |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Sat Jun 10, 2006 10:55 pm Post subject: |
|
|
| roderick wrote: | | If you are using pertty, make sure kdelibs is compiled with the patches. It may not be. |
The pertty patches? Yeah. I am using those. But, when I read the changelog for kde 3.5.3, they said that the issues with directly linking to the cups private functions has been fixed so it should work with cups 1.2.1 out of the box, right?
_________________
Nothing to read in this sig. Move along. |
|
| Back to top |
|
|
Carlo
Developer
Joined: 12 Aug 2002
Posts: 3356
|
| Posted: Sun Jun 11, 2006 9:21 am Post subject: |
|
|
| micmac wrote: | Like this:
| Code: |
=kde-base/ark-3.5.3
=kde-base/certmanager-3.5.3
=kde-base/kcalc-3.5.3
[...]
|
|
That's not a good idea, since you won't get revision bumps and it doesn't include packages that didn't change from 3.5.{1,2} to 3.5.3. Either use ~kde-base/foo-3.5.3 or better <=kde-base/foo-3.5.3-r99.
_________________
Please make sure that you have searched for an answer to a question after reading all the relevant docs. |
|
| Back to top |
|
|
roderick
l33t
Joined: 11 Jul 2005
Posts: 908
Location: St. John's, NL CANADA
|
| Posted: Sun Jun 11, 2006 2:28 pm Post subject: |
|
|
| StifflerStealth wrote: | | roderick wrote: | | If you are using pertty, make sure kdelibs is compiled with the patches. It may not be. |
The pertty patches? Yeah. I am using those. But, when I read the changelog for kde 3.5.3, they said that the issues with directly linking to the cups private functions has been fixed so it should work with cups 1.2.1 out of the box, right? |
Look at the 3.5.3 ebuild in portage. It has a patchset for cups.
this is from the 3.5.3 and 3.5.3-r1 ebuild:
| Code: |
src_unpack() {
kde_src_unpack
if use legacyssl ; then
# This patch won't be included upstream, see bug #128922
epatch ${FILESDIR}/kdelibs-3.5.2-kssl-3des.patch || die "Patch did not a
pply."
fi
if use cups && has_version '>=net-print/cups-1.2_pre'; then
cd "${S}"
EPATCH_EXCLUDE="kubuntu_39_cups12_compile_fixes.diff" \
EPATCH_SUFFIX="diff" \
EPATCH_MULTI_MSG="Applying KUbuntu patches for CUPS 1.2 support ..." \
EPATCH_FORCE="yes" \
epatch "${WORKDIR}/kdeprint-3.5.2-cups-1.2-patches/"
fi
}
|
You need this section. I believe the perrty patch never used the portage ebuild, but rather the 3.5.2 ebuild renamed.
Hope this helps.
_________________
If God were a pickle, I'd still say "no pickle on my burger".
http://roderick-greening.blogspot.com/ |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Sun Jun 11, 2006 3:24 pm Post subject: |
|
|
| roderick wrote: | You need this section. I believe the perrty patch never used the portage ebuild, but rather the 3.5.2 ebuild renamed.
Hope this helps. |
Hmmm. When I made the patches I used the portage ebuilds. This is a snipplet from the ebuild I used: | Code: | src_unpack() {
kde_src_unpack
if use legacyssl ; then
# This patch won't be included upstream, see bug #128922
epatch ${FILESDIR}/kdelibs-3.5.2-kssl-3des.patch || die "Patch did not apply."
fi
if use cups && has_version '>=net-print/cups-1.2_pre'; then
cd "${S}"
EPATCH_EXCLUDE="kubuntu_39_cups12_compile_fixes.diff" \
EPATCH_SUFFIX="diff" \
EPATCH_MULTI_MSG="Applying KUbuntu patches for CUPS 1.2 support ..." \
EPATCH_FORCE="yes" \
epatch "${WORKDIR}/kdeprint-3.5.2-cups-1.2-patches/"
fi
} |
So, I do have that code. :S I even did a fresh install just days ago because I felt like it.  I started from stage 1 and so it was a fresh system. I installed cups 1.2.1 then I installed kdelibs, but when I opened the Control Center to configure cups, it came up with an error stated that it could not locate cups and cupsd was started. I had to downgrad to a previous version, started it and it works fine. I didn't even recompile kdelibs and it works. :S I have the cups use flag set and 1.2.1 was installed, so that logic suggests that the patches should have been installed.
_________________
Nothing to read in this sig. Move along. |
|
| Back to top |
|
|
roderick
l33t
Joined: 11 Jul 2005
Posts: 908
Location: St. John's, NL CANADA
|
| Posted: Sun Jun 11, 2006 6:35 pm Post subject: |
|
|
CHeck to output to see of the cups patches are in fact being applied. It may be the >= line in the conditional patch failing.
If the output shows the patch is not being applied, then try modding the ebuild to say if >= 1.2.0 cups version rather than the >= 1.2_pre. COuld be some flawed logic... dunno.
_________________
If God were a pickle, I'd still say "no pickle on my burger".
http://roderick-greening.blogspot.com/ |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Sun Jun 11, 2006 7:31 pm Post subject: |
|
|
They apply: | Code: | emerge kdelibs
Calculating dependencies... done!
>>> Emerging (1 of 1) kde-base/kdelibs-3.5.3-r1 to /
>>> checking ebuild checksums ;-)
>>> checking auxfile checksums ;-)
>>> checking miscfile checksums ;-)
>>> checking kdelibs-3.5.3.tar.bz2 ;-)
>>> checking kdeprint-3.5.2-cups-1.2-patches.tar.bz2 ;-)
>>> Unpacking source...
>>> Unpacking kdelibs-3.5.3.tar.bz2 to /var/tmp/portage/kdelibs-3.5.3-r1/work
>>> Unpacking kdeprint-3.5.2-cups-1.2-patches.tar.bz2 to /var/tmp/portage/kdelibs-3.5.3-r1/work
* Applying kdelibs-3.5.0-bindnow.patch ... [ ok ]
* Applying kdelibs-3.5.0-kicker-crash.patch ... [ ok ]
* Applying kdelibs-3.5.3-pertty.diff ... [ ok ]
* Applying kdelibs-3.5.3-tango.diff ... [ ok ]
* Applying KUbuntu patches for CUPS 1.2 support ...
* kubuntu_40_cups12_remove_async.diff ... [ ok ]
* kubuntu_41_cups12_startstopfix.diff ... [ ok ]
* kubuntu_42_cups12_addmodify.diff ... [ ok ]
* kubuntu_43_cups12_empty_printers.diff ... [ ok ]
* kubuntu_44_cups12_init_script.diff ... [ ok ]
* kubuntu_47_cups12_list_ignore_warnings.diff ... [ ok ]
* kubuntu_48_cups12_cupsdconf.diff ... [ ok ]
* Done with patching
>>> Source unpacked. |
Well, I will recompile this and see if that helps any. I will report back when it's done compiling.
Maybe there is just something wrong with the patches?
Cheers.
_________________
Nothing to read in this sig. Move along. |
|
| Back to top |
|
|
roderick
l33t
Joined: 11 Jul 2005
Posts: 908
Location: St. John's, NL CANADA
|
| Posted: Sun Jun 11, 2006 7:36 pm Post subject: |
|
|
| StifflerStealth wrote: | | They apply: |
Oh well, I thought maybe they didn't.
Maybe the 1.2.1 cups is fixed and the patches aren't needed now for KDE (doubt it)...
_________________
If God were a pickle, I'd still say "no pickle on my burger".
http://roderick-greening.blogspot.com/ |
|
| Back to top |
|
|
micmac
l33t
Joined: 28 Nov 2003
Posts: 996
|
| Posted: Sun Jun 11, 2006 8:07 pm Post subject: |
|
|
| Carlo wrote: | | micmac wrote: | Like this:
| Code: |
=kde-base/ark-3.5.3
=kde-base/certmanager-3.5.3
=kde-base/kcalc-3.5.3
[...]
|
|
That's not a good idea, since you won't get revision bumps and it doesn't include packages that didn't change from 3.5.{1,2} to 3.5.3. Either use ~kde-base/foo-3.5.3 or better <=kde-base/foo-3.5.3-r99. |
Thanks for the tip! Fixed it on my box already.
mic |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Sun Jun 11, 2006 9:24 pm Post subject: |
|
|
| roderick wrote: | | StifflerStealth wrote: | | They apply: |
Oh well, I thought maybe they didn't.
Maybe the 1.2.1 cups is fixed and the patches aren't needed now for KDE (doubt it)... |
Thanks for your suggestions but cups just bombed out on me. Even after rebuilding. I use HPLIP, so there may still be some issues there. I dunno. But I could not add a printer at all. It erred out with:
Unable to load the requested drive: ... location of driver ... Parser stack overflow
I could not even add a printer with the web interface, so I guess it doesn't like the driver files that come with HPLIP in the HPIJS package. I was even talking with genstef on IRC about it.
Cheers.
_________________
Nothing to read in this sig. Move along. |
|
| Back to top |
|
|
unimatrix_zero
n00b
Joined: 08 Jul 2005
Posts: 28
Location: Bochum/ Germany
|
| Posted: Mon Jun 12, 2006 5:26 am Post subject: impossible?? |
|
|
Since a few days I try to install kdelibs-3.5.3 and the relaise version 3.5.3-rc1.
But its impossble for me. The make file allways stops with:
Making all in ksendbugmail
make[4]: Entering directory `/var/tmp/portage/kdelibs-3.5.3-r1/work/kdelibs-3.5.3/kio/misc/ksendbugmail'
/usr/qt/3/bin/moc ./smtp.h -o smtp.moc
/usr/qt/3/bin/moc ./main.h -o main.moc
creating ksendbugmail.all_cpp.cpp ...
i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../dcop -I../../../kdecore -I../../../kio/kssl -I../../../kjs -I./.. -I../../../dcop -I../../../libltdl -I../../../kdefx -I../../../kdecore -I../../../kdecore -I../../../kdeui -I../../../kio -I../../../kio/kio -I../../../kio/kfile -I../../.. -I/usr/qt/3/include -I. -I/usr/kde/3.5/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -march=pentium4 -O2 -fomit-frame-pointer -pipe -fvisibility-inlines-hidden -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fvisibility=hidden -fvisibility-inlines-hidden -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -c -o ksendbugmail.all_cpp.o ksendbugmail.all_cpp.cpp
smtp.cpp: In member function »void SMTP::connectTimerTick()«:
smtp.cpp:161: Warnung: »__comp_ctor « ist veraltet (deklariert bei ../../../kdecore/ksock.h:102)
/bin/sh ../../../libtool --silent --tag=CXX --mode=link i686-pc-linux-gnu-g++ -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -march=pentium4 -O2 -fomit-frame-pointer -pipe -fvisibility-inlines-hidden -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fvisibility=hidden -fvisibility-inlines-hidden -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -Wl,-O1 -Wl,--sort-common -s -o ksendbugmail -L/usr/kde/3.5/lib -L/usr/qt/3/lib -L/usr/lib -Wl,--as-needed -Wl,--enable-new-dtags -R /usr/kde/3.5/lib -R /usr/kde/3.5/lib -R /usr/qt/3/lib -R /usr/lib ksendbugmail.all_cpp.o ../../libkio.la
../../.libs/libkio.so: undefined reference to `KProgressDialog::show()'
collect2: ld returned 1 exit status
make[4]: *** [ksendbugmail] Fehler 1
make[4]: Leaving directory `/var/tmp/portage/kdelibs-3.5.3-r1/work/kdelibs-3.5.3/kio/misc/ksendbugmail'
make[3]: *** [all-recursive] Fehler 1
make[3]: Leaving directory `/var/tmp/portage/kdelibs-3.5.3-r1/work/kdelibs-3.5.3/kio/misc'
make[2]: *** [all-recursive] Fehler 1
make[2]: Leaving directory `/var/tmp/portage/kdelibs-3.5.3-r1/work/kdelibs-3.5.3/kio'
make[1]: *** [all-recursive] Fehler 1
make[1]: Leaving directory `/var/tmp/portage/kdelibs-3.5.3-r1/work/kdelibs-3.5.3'
make: *** [all] Fehler 2
!!! ERROR: kde-base/kdelibs-3.5.3-r1 failed.
Call stack:
ebuild.sh, line 1539: Called dyn_compile
ebuild.sh, line 939: Called src_compile
kdelibs-3.5.3-r1.ebuild, line 126: Called kde_src_compile
kde.eclass, line 111: Called kde_src_compile 'all'
kde.eclass, line 232: Called kde_src_compile 'myconf' 'configure' 'make'
kde.eclass, line 228: Called die
!!! died running emake, kde_src_compile:make
!!! If you need support, post the topmost build error, and the call stack if relevant
I´ve had reading all posts about this and try to test all proposals, but nothing, no chance to get
the kdelibs- on my system.
My System:
gcc-4.1.1
qt-4.1.3, qt-3.3.6-r1, glibc-2.4.90.20060516, kernel 2.6.17-rc6
emerge info:
Portage 2.1 (default-linux/x86/2006.0, gcc-4.1.1/vanilla, glibc-2.4.90.20060516-r0, 2.6.17-rc6 i686)
=================================================================
System uname: 2.6.17-rc6 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz
Gentoo Base System version 1.12.1
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled]
dev-lang/python: 2.4.3-r1
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: [Not Present]
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
sys-devel/binutils: 2.16.93, 2.17.50.0.2
sys-devel/gcc-config: 2.0.0_rc1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.16
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O2 -fomit-frame-pointer -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/eselect/compiler /etc/gconf /etc/revdep-rebuild /etc/splash /etc/terminfo"
CXXFLAGS="-march=pentium4 -O2 -fomit-frame-pointer -pipe -fvisibility-inlines-hidden"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--alphabetical"
FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict userpriv usersandbox"
GENTOO_MIRRORS="http://gentoo.osuosl.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
LANG="de_DE.UTF-8"
LC_ALL="de_DE.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -s"
LINGUAS="de"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 X a52 aac aalib acpi alsa apache2 apm arts artswrappersuid asf avi berkdb bitmap-fonts cairo cddb cdparanoia cdr cdrom cgi chrootx cjk cli codecs crypt csv cups curl curlwrappers custom-cflags cvsgraph dga dio divx4linux dri dts dv dvd dvdr dvdread dxr3 edl eds elibc_glibc emboss encode escreen esd fb fbcon ffmpeg firefox flac foomaticdb fortran freetype gatos gdbm gif gimp gimpprint gkrellm glibc-omitfp gnome gpm gps gstreamer gstreamer010 gtk gtk2 gtkhtml gtkspell hbci i8x0 id3 imagemagick imap imlib innodb input_devices_evdev input_devices_keyboard input_devices_mouse ipv6 irda irmc isdnlog ithreads jabber java javascript jepg jpeg kde kdeenablefinal kdehiddenvisibility kdenewldflags kernel_linux lame libg++ libwww linguas_sv linguas_sv-DE live lm_sensors logitech-mouse lzw lzw-tiff mad maildir mbox mikmod mjpeg mmx mng motif motiv mp3 mp4 mp4live mpeg mpeg2 mpeg4 msql mysqli ncurses nls nocardbus nomalloccheck nptl nptlonly nsplugin nvidia objc offensive ogg oggvorbis opengl openssh oss pam pcap pcre pdf pdflib perl pic plotutils png pnp ppds pppd python qt qt4 quicktime rb4 readline real recode reflection rtc sasl scanner sdl session sharedmem slp sox speedo spell spl sse sse2 sse3 ssh ssl tcpd theora thesaurus threads tiff transcode truetype truetype-fonts trusted type1 type1-fonts udev unicode usb userland_GNU userlocales utf8 v4l vcd vcdimager video_cards_fbdev video_cards_nv video_cards_nvidia video_cards_vesa video_cards_vga videos vidix vim voice vorbis wifi win32codecs xaw3d xine xml xmms xorg xosd xscreensaver xv xvid xvmc yahoo yv12 zlib linguas_de"
Unset: CTARGET, INSTALL_MASK, PORTAGE_RSYNC_EXTRA_OPTS
Some suggestions? |
|
| Back to top |
|
|
unimatrix_zero
n00b
Joined: 08 Jul 2005
Posts: 28
Location: Bochum/ Germany
|
| Posted: Tue Jun 13, 2006 6:34 am Post subject: get solution |
|
|
Hey guys,
i got the solution this morning. The simplest way to get the kdelibs on my machine was to switch of
kdeenablefinal kdehiddenvisibility kdenewldflags |
|
| Back to top |
|
|
|
Desktop Environments
