| View previous topic :: View next topic |
| Author |
Message |
mamuth
n00b
Joined: 13 Jun 2006
Posts: 2
|
 Posted: Fri Jun 30, 2006 1:59 pm Post subject: Secure Digital Media Reader on HP dv1000 series |
 |
|
I installed gentoo in my hp dv1000 series notebook, and almost everything have perfectly functions less the card reader.
see output of the command lspci
| Code: |
06:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
|
and dmesg:
| Code: |
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
sdhci: Secure Digital Host Controller Interface driver, 0.11
sdhci: Copyright(c) Pierre Ossman
sdhci [sdhci_probe()]: found at 0000:06:09.4
sdhci [sdhci_probe()]: found 3 slot(s)
ACPI: PCI Interrupt 0000:06:09.4[A] -> GSI 20 (level, low) -> IRQ 169
sdhci [sdhci_probe_slot()]: slot 0 at 0xb0109400, irq 169
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x00000000 | Version: 0x00008400
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x00020000 | Host ctl: 0x00000000
sdhci: Power: 0x00000000 | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000002
sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x01821090 | Max curr: 0x00000000
sdhci: ===========================================
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
mmc0: SDHCI at 0xb0109400 irq 169 PIO
sdhci [sdhci_probe_slot()]: slot 1 at 0xb0109000, irq 169
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x00000000 | Version: 0x00008400
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x00020000 | Host ctl: 0x00000000
sdhci: Power: 0x00000000 | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000002
sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x01821090 | Max curr: 0x00000000
sdhci: ===========================================
mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
mmc1: SDHCI at 0xb0109000 irq 169 PIO
sdhci [sdhci_probe_slot()]: slot 2 at 0xb0108400, irq 169
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x00000000 | Version: 0x00008400
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
sdhci: Power: 0x00000000 | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000002
sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x01821898 | Max curr: 0x00000000
sdhci: ===========================================
mmc0: clock 62500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc2: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
mmc2: SDHCI at 0xb0108400 irq 169 PIO
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.5
wbsd: Copyright(c) Pierre Ossman
mmc0: clock 62500Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
mmc0: starting CMD0 arg 00000000 flags 00000040
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0)
mmc0: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 62500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc0: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD1 arg 00000000 flags 00000061
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1)
mmc0: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
mmc1: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
mmc1: clock 62500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc1: clock 62500Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
mmc1: starting CMD0 arg 00000000 flags 00000040
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0)
mmc1: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: clock 62500Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc1: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc1: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc1: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc1: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc1: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: starting CMD1 arg 00000000 flags 00000061
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1)
mmc1: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000
mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
mmc2: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
mmc2: clock 93750Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc2: clock 93750Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
mmc2: starting CMD0 arg 00000000 flags 00000040
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0)
mmc2: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: clock 93750Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
mmc2: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc2: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc2: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc2: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: starting CMD55 arg 00000000 flags 00000015
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc2: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: starting CMD1 arg 00000000 flags 00000061
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1)
mmc2: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000
mmc2: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
|
but when I go to execute the command "mount /dev/mmc0 /mnt/sdcard"..the system says that the linking does not exist "mmcX"
Somebody obtained to install this |
|
| Back to top |
|
 |
frederik
n00b
Joined: 08 Nov 2004
Posts: 44
|
| Posted: Tue Aug 01, 2006 8:19 pm Post subject: |
|
|
Have you tried to compile the driver into the kernel? I had exactly the same error messages. I read that it sometimes doesn't work when compiled as modules.
Good Luck,
Frederik |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
