| View previous topic :: View next topic |
| Author |
Message |
devzero_DE
n00b
Joined: 06 Jun 2004
Posts: 36
Location: Cologne / Germany
|
 Posted: Mon Jul 03, 2006 10:11 am Post subject: Instabiles System bei Portage (bei Last?) |
 |
|
Hallo,
ich nutze schon länger Gentoo, stehe aber jetzt bei einem "neuen" Rechner vor einem Problem. Es handelt sich um einen Pentium 4 mit aktiviertem Hyperthreading.
Ich habe öfters folgende Meldung im Log:
| Code: | APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40) |
Gegooglet habe ich nach dem Fehler schon, leider fand ich nichts wirklich brauchbares oder handfestens dazu.
Es scheint aber alles normal weiter zu laufen wenn diese Meldung kommt.
Leider steigt aber manchmal Portage beim compilieren aus.
Ich habe jetzt keine genaue Fehlermeldung die ich posten kann, aber es kommt zunächst irgendwo ein Segfault und dann kommt ein Standardtext von Portage, dass man diesen Bug nicht reproduzieren kann und es wohl ein Hardware oder OS Problem sei.
Das ist schon bei mehreren Paketen aufgetreten, ein erneuter merge klappt dann aber meistens.
Beim letzten Fehler dieser Art, konnte ich folgendes beobachten:
| Code: | Unable to handle kernel paging request at virtual address 0000e853
printing eip:
c015d473
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: loop bttv compat_ioctl32 btcx_risc ir_common lirc_i2c lirc_dev msp3400 saa7115 tda9887 tuner ivtv i2c_algo_bit tveeprom dvb_ttpci l64781 saa7146_vv video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299 dvb_core tda8083 stv0297 sp8870 firmware_class ves1x93 ttpci_eeprom i2c_core cls_u32 cls_fw sch_sfq sch_htb xt_limit xt_state ipt_TCPMSS xt_tcpudp ipt_MASQUERADE iptable_nat iptable_filter ip_tables x_tables ip_nat_irc ip_nat_ftp ip_nat ip_conntrack_irc ip_conntrack_ftp ip_conntrack pppoe pppox ppp_generic slhc rtc usbcore 8139too 3c59x
CPU: 0
EIP: 0060:[<c015d473>] Not tainted VLI
EFLAGS: 00010206 (2.6.16-gentoo-r9 #2)
EIP is at __d_lookup+0x5e/0xdc
eax: 00133dd7 ebx: df218694 ecx: 00000011 edx: c141c180
esi: 0000e853 edi: c1994294 ebp: d58e3e34 esp: d58e3dc0
ds: 007b es: 007b ss: 0068
Process cc1 (pid: 6468, threadinfo=d58e2000 task=d685da50)
Stack: <0>00000000 d48cf039 00133dd7 00000007 00133dd7 d58e3ef0 d58e3e2c dffc52c0
c0154c8e c1994294 d58e3e34 00133dd7 c4aad2bc 00133dd7 d58e3ef0 c0155411
d58e3ef0 d58e3e34 d58e3e2c dffc52e8 c040a600 d58e3f24 fffffffe c01558a1
Call Trace:
[<c0154c8e>] do_lookup+0x1a/0x7b
[<c0155411>] __link_path_walk+0x722/0xb09
[<c01558a1>] link_path_walk+0xa9/0xb3
[<c015583d>] link_path_walk+0x45/0xb3
[<c0154646>] do_getname+0x3e/0x5c
[<c0155c2b>] do_path_lookup+0x1c9/0x1f7
[<c0155e96>] __user_walk_fd+0x2a/0x42
[<c0151341>] vfs_lstat_fd+0x17/0x42
[<c015137b>] vfs_lstat+0xf/0x13
[<c01518eb>] sys_lstat64+0x10/0x27
[<c010268b>] sysenter_past_esp+0x54/0x75
Code: 35 01 00 37 9e c1 e8 07 03 44 24 08 89 c2 81 f2 01 00 37 9e d3 ea 31 d0 8b 15 e8 74 45 c0 23 05 e0 74 45 c0 8b 34 82 85 f6 74 73 <8b> 06 0f 18 00 90 8d 5e f0 8b 44 24 08 39 43 1c 75 5d 39 7b 18 |
Speicher habe ich mit Memtest86 durchlaufen lassen, das scheint ok.
Die CPU war auch nie overclocked und im BIOS ist auch nix wildes aktiviert.
Zuvor lief der Rechner problems bei meiner Freundin mit Windows XP.
Evtl. ein Kernelproblem oder irgendwelche Unverträglich mit dem Chipsatz? Leider SiS.
Hier noch ein paar Infos zu meinem System.
| Code: | dev0 ~ # emerge --info
Portage 2.1-r1 (default-linux/x86/2006.0, gcc-3.4.6, glibc-2.3.6-r4, 2.6.16-gentoo-r9 i686)
=================================================================
System uname: 2.6.16-gentoo-r9 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz
Gentoo Base System version 1.6.14
ccache version 2.3 [enabled]
dev-lang/python: 2.4.2
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: 2.3
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.12
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
sys-devel/binutils: 2.16.1-r3
sys-devel/gcc-config: 1.3.13-r2
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /var/qmail/alias /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS="-march=pentium4 -O2 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="x86 apache2 apm avi berkdb bitmap-fonts cli crypt dlloader dri eds emboss encode esd foomaticdb gdbm gif gnome gpm gstreamer gtk2 imlib isdnlog jpeg kde libg++ libwww mad mikmod motif mp3 mpeg ncurses nls nptl ogg opengl oss pam pcre pdflib perl png pppd qt qt3 qt4 quicktime readline reflection session spell spl ssl tcpd truetype truetype-fonts type1-fonts udev vorbis xml xmms xorg xv zlib elibc_glibc input_devices_keyboard input_devices_mouse input_devices_evdev kernel_linux userland_GNU"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
dev0 ~ # lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 50)
Subsystem: Silicon Integrated Systems [SiS] 645xx
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 3.5
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: eb000000-ecffffff
Prefetchable memory behind bridge: e8000000-e9ffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel
I/O ports at 1400 [size=32]
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, medium devsel, latency 128
I/O ports at f000 [size=16]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at ed00a000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at ed004000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at ed005000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ed006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:09.0 Mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100 TX2) (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Flags: bus master, 66MHz, slow devsel, latency 32, IRQ 16
I/O ports at cc00 [size=8]
I/O ports at d000 [size=4]
I/O ports at d400 [size=8]
I/O ports at d800 [size=4]
I/O ports at dc00 [size=16]
Memory at ed000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 30020000 [size=16K]
Capabilities: [60] Power Management version 1
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at e000 [size=128]
Memory at ed009000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
00:0b.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ed00b000 (32-bit, non-prefetchable) [size=512]
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at e400 [size=256]
Memory at ed00c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 9
Memory at eb000000 (32-bit, non-prefetchable) [size=16M]
Memory at e8000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at ec000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
dev0 ~ # cat /proc/interrupts
CPU0 CPU1
0: 175248 0 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 2 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
14: 4370 0 IO-APIC-edge ide0
15: 35 0 IO-APIC-edge ide1
16: 2383 0 IO-APIC-level ide2, ide3
17: 1445 0 IO-APIC-level eth0
18: 1275 0 IO-APIC-level eth1
NMI: 0 0
LOC: 175190 175199
ERR: 0
MIS: 0 |
|
|
| Back to top |
|
 |
schachti
Advocate
Joined: 28 Jul 2003
Posts: 3765
Location: Gifhorn, Germany
|
| Posted: Wed Jul 05, 2006 1:47 pm Post subject: |
|
|
Was passiert, wenn Du mal ein paar Stunden lang cpuburn laufen laesst? Temperatur von CPU und Chipsatz ist im gruenen Bereich?
_________________
Never argue with an idiot. He brings you down to his level, then beats you with experience.
How-To: Daten verschlüsselt auf DVD speichern. |
|
| Back to top |
|
|
devzero_DE
n00b
Joined: 06 Jun 2004
Posts: 36
Location: Cologne / Germany
|
| Posted: Wed Jul 05, 2006 1:53 pm Post subject: |
|
|
Das geht schon direkt los.
Habe jetzt mal APIC und HT ausgeschaltet - damit läuft er stabil. Hat ein komplettes emerge -e world überstanden - das sollte Auslastung genug gewesen sein.
Scheinbar ein fehlerhaftes APIC vom Board - naja brauch ich nicht zwingend, hab so alles gut verteilt bekommen und HT ist auch nichts besonderes.
Danke für Deine Antwort. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
