| View previous topic :: View next topic |
| Author |
Message |
AsM0DeUz
n00b
Joined: 06 Sep 2005
Posts: 37
|
 Posted: Thu Jul 06, 2006 5:16 pm Post subject: Unable to burn with my sata plextor burner |
 |
|
Hi !
I'd like to burn with my PX755SA burner but it isn't detected by cdrecord -scanbus or cd-info command, the only device detected is my IDE plextor PX130 DVD reader :
| Quote: | cd-info
cd-info version 0.77 x86_64-pc-linux-gnu
Copyright (c) 2003, 2004, 2005 R. Bernstein
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
CD location : /dev/cdrom
CD driver name: GNU/Linux
access mode: ioctl
Vendor : PLEXTOR
Model : DVD-ROM PX-130A
Revision : 1.02
Hardware : CD-ROM or DVD
Can eject : Yes
Can close tray : Yes
Can disable manual eject : Yes
Can select juke-box disc : No |
| Quote: | cdrecord -scanbus
Cdrecord-ProDVD-Clone 2.01.01a10 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'. |
But as you can see below my burner is detected by the kerner (2.6.15). You can see my sata hdd is sda but i can't find what is the burner, i tried sdb but it doesn't seem to be that ...  I can't even mount the dvds in that drive.
| Quote: | Probing IDE interface ide0...
hda: PLEXTOR DVD-ROM PX-130A, ATAPI CD/DVD-ROM drive
hdb: WDC WD400BB-22JHA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hdb: max request size: 128KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hda: ATAPI 50X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APS
I] -> GSI 22 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 233
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 233
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 50
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 50
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata3: dev 0 ATA-7, max UDMA/133, 390721968 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f
ata4: dev 0 ATAPI, max UDMA/66
ata4(0): applying bridge limits
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device addednv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/66
scsi3 : sata_nv
Vendor: ATA Model: ST3200826AS Rev: 3.02
Type: Direct-Access ANSI SCSI revision: 05
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
Vendor: PLEXTOR Model: DVDR PX-755A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1 |
I've tried Xcdroast but it only detect the PX130.
Do you have any idea ?
Regards |
|
| Back to top |
|
 |
AsM0DeUz
n00b
Joined: 06 Sep 2005
Posts: 37
|
| Posted: Sat Jul 08, 2006 10:34 am Post subject: |
|
|
 Noone has a sata DVD burner ? |
|
| Back to top |
|
|
AsM0DeUz
n00b
Joined: 06 Sep 2005
Posts: 37
|
| Posted: Fri Jul 14, 2006 9:01 am Post subject: |
|
|
Am i the only guy with a sata dvd burner  |
|
| Back to top |
|
|
AsM0DeUz
n00b
Joined: 06 Sep 2005
Posts: 37
|
| Posted: Fri Aug 04, 2006 1:18 pm Post subject: |
|
|
| Are you all on holiday ? or am i the only guy with a sata burner |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Fri Aug 04, 2006 2:27 pm Post subject: |
|
|
| AsM0DeUz wrote: | | Are you all on holiday ? or am i the only guy with a sata burner |
Gues you are 
Try the following: | Code: | | cdrecord dev=ATAPI -scanbus |
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
AsM0DeUz
n00b
Joined: 06 Sep 2005
Posts: 37
|
| Posted: Sun Aug 06, 2006 10:06 am Post subject: |
|
|
| infirit wrote: | Try the following: | Code: | | cdrecord dev=ATAPI -scanbus |
|
Here is the result
| Code: | Cdrecord-ProDVD-Clone 2.01.01a10 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2006 J�rg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'PLEXTOR ' 'DVD-ROM PX-130A ' '1.02' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
|
As you can see, only my atapi DVD player is seen. The Sata burner isn't. I wonder if it is detected by the kernel ? |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Sun Aug 06, 2006 10:29 am Post subject: |
|
|
Ok, that didn't go well. What if you open the device directly? | Code: | | cdrecord dev=/dev/sd? -checkdrive |
It will complain but you can ignore that.
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
Primozic
Apprentice
Joined: 11 Jun 2004
Posts: 186
Location: Dover, NH, USA
|
| Posted: Sun Aug 06, 2006 6:55 pm Post subject: |
|
|
What kernel are you using? gentoo-sources? vanilla-sources? I know it's a 2.6.15 variant.
If you're using vanilla-sources, you should apply this patch:
http://sources.gentoo.org/viewcvs.py/*checkout*/linux-patches/genpatches-2.6/trunk/2.6.15/4300_libata-enable-atapi.patch
Alternatively, you can try adding one of the following lines to your kernel boot parameters (try them both, I'm not sure which one it is):
| Code: | libata.atapi_enabled=1
atapi_enabled=1 |
_________________
Interceptor: Intel Core 2 Duo 2.4GHz | AOpen i965GMt-LA Mini-ITX | 4GB PC2-5300 DDR2
Pursuit: AMD Geode NX 1500 1.0GHz | TYAN Tomcat K7M S2498AGNN FlexATX | 2GB PC2700 DDR |
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
|
| Back to top |
|
|
|
Kernel & Hardware
