| View previous topic :: View next topic |
| Author |
Message |
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
 Posted: Tue Jul 25, 2006 11:46 am Post subject: DVB-t usb Leadtek stick STAE MOD3000[Risolto] |
 |
|
Salve a tutti!
Mi hanno regalato una penna USB per la TV digitale DVB-T, Ladtek WinFast usb Dongle.....dopo un paio di ricerche e vari test credo che il chip sia STAE MOD3000 e se non sbaglio e' supportato dal kernel, l'unico problema e' che inserendo la penna usb,l'unico messaggio del kernel e' che un usb device e' stato collegato, usbview riporta device sconosciuto.....
Il bello e' che se lancio vmware con win2000 e la penna stick e' attaccata viene riconosciuta da win2k , si accende e il kernel registra il chip come appunto MOD3000,nessun modulo del kernel viene caricato.....nessuna variazione in /dev/dvb/* (ho anche una scheda dvb-s che funziona perfettamente....)
Spegnendo vmware la penna rimane accesa ma sembra non dare segni di vita.
Che sia un problema delle mie porte USB?? O che sia una penna USB da buttare??
Qualche idea??
Grazie!
Last edited by Tintenstich on Sat Jul 29, 2006 1:02 pm; edited 3 times in total |
|
| Back to top |
|
 |
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Tue Jul 25, 2006 1:12 pm Post subject: |
|
|
| Code: | cd /usr/src
hg clone http://www.linuxtv.org/hg/~pb/v4l-dvb.stk3000p
cd v4l-dvb.stk3000p/
make
make install |
poi inserisci la penna e vedi che succede nel dmesg
ps hai bisogno di hg [dev-util/mercurial]
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
makoomba
Bodhisattva
Joined: 03 Jun 2004
Posts: 1856
|
| Posted: Tue Jul 25, 2006 1:19 pm Post subject: |
|
|
Moved from Forum italiano (Italian) to Forum di discussione italiano.
_________________
When all else fails, read the instructions. |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Tue Jul 25, 2006 1:22 pm Post subject: |
|
|
| Code: |
uname -r|perl -ne 'if (/^([0-9]*)\.([0-9])*\.([0-9]*)(.*)$/) { printf ("VERSION=%s\nPATCHLEVEL:=%s\nSUBLEVEL:=%s\nKERNELRELEASE:=%s.%s.%s%s\n",$1,$2,$3,$1,$2,$3,$4); };' > ./.version
make[1]: Leaving directory `/usr/src/v4l-dvb.stk3000p/v4l'
make[1]: Entering directory `/usr/src/v4l-dvb.stk3000p/v4l'
scripts/make_makefile.pl
make[2]: Entering directory `/usr/src/v4l-dvb.stk3000p/v4l'
creating symbolic links...
./scripts/make_kconfig.pl
Preparing to compile for kernel version 2.6.16
VIDEO_PLANB requires version 2.6.99
VIDEO_VINO requires version 2.6.99
VIDEO_ZR36120 requires version 2.6.99
VIDEO_M32R_AR_M64278 requires version 2.6.99
/lib/modules/2.6.16-gentoo-r6/build/scripts/kconfig/conf -m Kconfig
make[2]: /lib/modules/2.6.16-gentoo-r6/build/scripts/kconfig/conf: Command not found
make[2]: Entering directory `/usr/src/linux-2.6.16-gentoo-r6'
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/videodev.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/v4l2-common.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/compat_ioctl32.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.o
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_bit_setscl':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:49: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_bit_setsda'
:
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:66: error: structure has no memb
er named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_i2c_probe':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:134: error: structure has no mem
ber named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:135: error: structure has no mem
ber named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:137: error: structure has no mem
ber named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:167: error: structure has no mem
ber named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:168: error: structure has no mem
ber named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_i2c_remove'
:
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:176: error: structure has no mem
ber named `card_priv'
make[3]: *** [/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.o] Error 1
make[2]: *** [_module_/usr/src/v4l-dvb.stk3000p/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.16-gentoo-r6'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/usr/src/v4l-dvb.stk3000p/v4l'
make: *** [all] Error 2
|
.....Mmmmm.....non sembra andare......
Dopo il make install, inserendo la penna USB non succede nulla |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Tue Jul 25, 2006 1:41 pm Post subject: |
|
|
mi e' appena arrivata la mail dalla Leadtek nella quale dicono che il chip della penna USB e':DIBCOM DIB3000
Mmmm....non ci capisco piu' nulla, credo di aver installato i moduli DIBCOM nel kernel..... |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Tue Jul 25, 2006 2:09 pm Post subject: |
|
|
disabilita i vari driver DVB del kernel lasciando solo questi
| Code: | # Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
|
ricompila così il kernel, reboot, e poi dai di nuovo make e make install del v4l-dvb-stk3000p
Ho una penna simile, della Toshiba, con lo stesso chipset ... ho sudato per via di errori di compilazione, ma poi ce l'ho fatta.
Stai attento agli errori [durante il make o il caricamento dei moduli] è possibile che roba vecchia sia ancora presente in /lib/modules/KERNELVERSION .. . eliminali ...
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Tue Jul 25, 2006 2:36 pm Post subject: |
|
|
si grazie! Il kernel e' gia' cosi' configurato.....
Ho letto in giro che servirebbe un file firmware da mettere in /lib/firmware o dove hotplug di solito cerce i file, ma non so dove trovarlo , so solo che si puo' estrarre il firmware da un driver windows.... |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Tue Jul 25, 2006 6:48 pm Post subject: |
|
|
pardòn ... mi sono scordato di media-tv/linuxtv-dvb-firmware, emerge e via
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Wed Jul 26, 2006 12:29 am Post subject: |
|
|
non va , il pacchetto non contiene il firmware adatto.
Ho bisogno del firmware Leadtek....queste ditte del cazz# quando impareranno che esiste anche linux!!??
Non funzia nemmeno con vmware e win2k , di certo non partiziono il mio disco per mettere windows per una stupida penna usb. |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Wed Jul 26, 2006 9:56 am Post subject: |
|
|
ok, ricominciamo da zero.
0. inserisci la penna
1. lsusb -v
2. dmesg
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Wed Jul 26, 2006 12:59 pm Post subject: |
|
|
| Code: |
lsusb
Bus 004 Device 009: ID 0413:6025 Leadtek Research, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
|
| Code: |
new high speed USB device using ehci_hcd and address 9
usb 4-2: configuration #1 chosen from 1 choice
|
|
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Wed Jul 26, 2006 3:38 pm Post subject: |
|
|
La tua penna sembra essere supportata dal modulo MT2060, quello che uso anche io.
riprova la compilazione suggerita prima e incolla tutti gli errori. Per quanto riguarda il firmware, dovrebbe andare quello presente in portage.
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Wed Jul 26, 2006 5:30 pm Post subject: |
|
|
| Code: |
make
make -C /usr/src/v4l-dvb.stk3000p/v4l
make[1]: Entering directory `/usr/src/v4l-dvb.stk3000p/v4l'
echo "No version yet."
No version yet.
uname -r|perl -ne 'if (/^([0-9]*)\.([0-9])*\.([0-9]*)(.*)$/) { printf ("VERSION=%s\nPATCHLEVEL:=%s\nSUBLEVEL:=%s\nKERNELRELEASE:=%s.%s.%s%s\n",$1,$2,$3,$1,$2,$3,$4); };' > ./.version
make[1]: Leaving directory `/usr/src/v4l-dvb.stk3000p/v4l'
make[1]: Entering directory `/usr/src/v4l-dvb.stk3000p/v4l'
scripts/make_makefile.pl
make[2]: Entering directory `/usr/src/v4l-dvb.stk3000p/v4l'
creating symbolic links...
./scripts/make_kconfig.pl
Preparing to compile for kernel version 2.6.16
VIDEO_PLANB requires version 2.6.99
VIDEO_VINO requires version 2.6.99
VIDEO_ZR36120 requires version 2.6.99
VIDEO_M32R_AR_M64278 requires version 2.6.99
/lib/modules/2.6.16-gentoo-r6/build/scripts/kconfig/conf -m Kconfig
make[2]: /lib/modules/2.6.16-gentoo-r6/build/scripts/kconfig/conf: Command not found
make[2]: *** [allmodconfig] Error 127
make[2]: Leaving directory `/usr/src/v4l-dvb.stk3000p/v4l'
creating symbolic links...
make -C /lib/modules/2.6.16-gentoo-r6/build SUBDIRS=/usr/src/v4l-dvb.stk3000p/v4l modules
make[2]: Entering directory `/usr/src/linux-2.6.16-gentoo-r6'
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/videodev.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/v4l2-common.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/compat_ioctl32.o
CC [M] /usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.o
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_bit_setscl':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:49: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_bit_setsda':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:66: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_i2c_probe':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:134: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:135: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:137: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:167: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:168: error: structure has no member named `card_priv'
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c: In function `vp3054_i2c_remove':
/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.c:176: error: structure has no member named `card_priv'
make[3]: *** [/usr/src/v4l-dvb.stk3000p/v4l/cx88-vp3054-i2c.o] Error 1
make[2]: *** [_module_/usr/src/v4l-dvb.stk3000p/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.16-gentoo-r6'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/usr/src/v4l-dvb.stk3000p/v4l'
make: *** [all] Error 2
gentoo v4l-dvb.stk3000p # |
|
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Wed Jul 26, 2006 5:56 pm Post subject: |
|
|
ti incollo il mio .config ... quando dai il make va a compilare anche i driver v4l che non ci interessano, nello specifico per la tv via antenna.
| Code: | [...]
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
#
# Supported SAA7146 based PCI Adapters
#
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terresterial DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_USB_DABUSB is not set
[..] |
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Wed Jul 26, 2006 6:38 pm Post subject: |
|
|
ok dopo il make con errori do make install e installa una serie di moduli...fino qua ok.
Se inserisco la penna USB non succede nulla.
| Code: | usb 4-2: new high speed USB device using ehci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
|
Se inserisco moduli nel kernel dib3000-common e compagnia bella non succede nulla.....
usbview ritorna device sconosciuto
E questo succede con vmware e win2k appena inserisco la penna usb
| Code: |
Jul 26 20:44:01 gentoo usb 4-2: configuration #1 chosen from 1 choice
Jul 26 20:44:02 gentoo input: STAE MOD3000 as /class/input/input2
Jul 26 20:44:02 gentoo input: USB HID v1.11 Device [STAE MOD3000] on usb-0000:00:10.3-2
Jul 26 20:44:02 gentoo usbcore: registered new driver usbhid
Jul 26 20:44:02 gentoo drivers/usb/input/hid-core.c: v2.6:USB HID core driver
|
|
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Wed Jul 26, 2006 9:52 pm Post subject: |
|
|
in teoria dovresti caricare questi moduli
| Code: | unzWire v4l-dvb.stk3000p # lsmod
Module Size Used by
dvb_usb_dibusb_mc 6016 0
dvb_usb_dibusb_common 9860 1 dvb_usb_dibusb_mc
mt2060 5252 1 dvb_usb_dibusb_common
dib3000mc 15360 1 dvb_usb_dibusb_common
dib3000_common 2944 1 dib3000mc
dvb_usb 19464 2 dvb_usb_dibusb_mc,dvb_usb_dibusb_common
dvb_core 79272 1 dvb_usb
dvb_pll 12932 2 dvb_usb_dibusb_common,dvb_usb
firmware_class 10752 2 dvb_usb
|
tutti si caricano bene?
quando fai il modprobe non hai errori?
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Thu Jul 27, 2006 12:53 am Post subject: |
|
|
si sono tutti quelli che carico io con modprobe senza il minimo errore, ripeto , credo manchi il firmware adatto .....che viene caricato da vmware  ma la penna rimane assente in ogni caso..... |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Thu Jul 27, 2006 12:57 am Post subject: |
|
|
ls -la /lib/firmware/
che tira fuori?
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Thu Jul 27, 2006 1:00 am Post subject: |
|
|
| Code: | gentoo ~ # ls -la /lib/firmware/
total 2030
drwxr-xr-x 4 root root 1656 Jul 26 02:18 .
drwxr-xr-x 12 root root 4432 Jul 2 02:58 ..
-rw-r--r-- 1 root root 702 Dec 23 2004 blacklist
-rwxr-xr-x 1 root root 6359 Dec 23 2004 dasd.agent
-rwxr-xr-x 1 root root 677 Dec 23 2004 dasd.permissions
-rw------- 1 root root 18560 Dec 18 2005 dvb-dongle.fw
-rw-r--r-- 1 root root 9584 Jul 26 02:18 dvb-fe-nxt2004.fw
-rw-r--r-- 1 root root 12772 Jul 26 02:18 dvb-fe-or51132-qam.fw
-rw-r--r-- 1 root root 17532 Jul 26 02:18 dvb-fe-or51132-vsb.fw
-rw-r--r-- 1 root root 8518 Jul 26 02:18 dvb-fe-or51211.fw
-rw-r--r-- 1 root root 20108 Jul 26 02:18 dvb-fe-sp8870.fw
-rw-r--r-- 1 root root 30555 Jul 26 02:18 dvb-fe-tda10045.fw
-rw-r--r-- 1 root root 24478 Jul 26 02:18 dvb-fe-tda10046.fw
-rw-r--r-- 1 root root 239956 Jul 26 02:18 dvb-ttpci-01.fw
-rw-r--r-- 1 root root 430328 Jul 26 02:18 dvb-ttusb-dec-2000t.fw
-rw-r--r-- 1 root root 460448 Jul 26 02:18 dvb-ttusb-dec-2540t.fw
-rw-r--r-- 1 root root 465152 Jul 26 02:18 dvb-ttusb-dec-3000s.fw
-rw-r--r-- 1 root root 10757 Jul 26 02:18 dvb-usb-avertv-a800-02.fw
-rw-r--r-- 1 root root 9180 Jul 26 02:18 dvb-usb-dibusb-5.0.0.11.fw
-rw-r--r-- 1 root root 7558 Jul 26 02:18 dvb-usb-dibusb-6.0.0.8.fw
-rw-r--r-- 1 root root 7951 Jul 25 17:44 dvb-usb-dibusb-an2235-01.f
-rw-r--r-- 1 root root 7431 Jul 26 02:18 dvb-usb-dtt200u-01.fw
-rw-r--r-- 1 root root 4286 Jul 26 02:18 dvb-usb-umt-010-02.fw
-rw-r--r-- 1 root root 10752 Jul 26 02:18 dvb-usb-vp702x-01.fw
-rw-r--r-- 1 root root 10752 Jul 26 02:18 dvb-usb-vp7045-01.fw
-rw-r--r-- 1 root root 8581 Jul 26 02:18 dvb-usb-wt220u-01.fw
-rwxr-xr-x 1 root root 1118 Dec 23 2004 firmware.agent
-rw-r--r-- 1 root root 5293 Dec 23 2004 hotplug.functions
-rwxr-xr-x 1 root root 2860 Dec 23 2004 ieee1394.agent
-rwxr-xr-x 1 root root 6506 Dec 23 2004 input.agent
-rwxr-xr-x 1 root root 3219 Dec 23 2004 input.rc
-rwxr-xr-x 1 root root 3028 Dec 23 2004 net.agent
drwxr-xr-x 2 root root 48 Dec 23 2004 pci
-rwxr-xr-x 1 root root 3739 Dec 23 2004 pci.agent
-rwxr-xr-x 1 root root 2264 Dec 23 2004 pci.rc
-rw-r--r-- 1 root root 677 Dec 23 2004 pnp.distmap
-rwxr-xr-x 1 root root 2836 Dec 23 2004 pnp.rc
-rwxr-xr-x 1 root root 1459 Dec 23 2004 scsi.agent
-rwxr-xr-x 1 root root 6911 Dec 23 2004 tape.agent
-rwxr-xr-x 1 root root 483 Dec 23 2004 tape.permissions
drwxr-xr-x 2 root root 304 Jul 25 17:01 usb
-rwxr-xr-x 1 root root 13466 Dec 23 2004 usb.agent
-rw-r--r-- 1 root root 39306 Dec 23 2004 usb.distmap
-rw-r--r-- 1 root root 4364 Dec 23 2004 usb.handmap
-rwxr-xr-x 1 root root 12861 Dec 23 2004 usb.rc
-rw-r--r-- 1 root root 189 Dec 23 2004 usb.usermap
-rwx------ 1 root root 29952 Dec 18 2005 wfdbbda.fw
-rwx------ 1 root root 8320 Dec 18 2005 wfdbmodr.fw
gentoo ~ # |
|
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Fri Jul 28, 2006 8:18 pm Post subject: |
|
|
risolto....non so come ma ho risolto  |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Fri Jul 28, 2006 9:22 pm Post subject: |
|
|
ma...insomma...in effetti dopo il reboot la macchina e' andata in kernel-panik, recompilato il kernel ,la macchina riparte.
Inserendo i moduli con insmod ./dvb-usb* la penna viene riconosciuta ma sembra che crashi il sistema usb.
qui riporto le due versioni
prima del reboot:
| Code: |
Jul 28 22:15:39 gentoo usbcore: registered new driver dvb_usb_dibusb_mc
Jul 28 22:16:02 gentoo usb 4-2: new high speed USB device using ehci_hcd and address 10
Jul 28 22:16:02 gentoo usb 4-2: configuration #1 chosen from 1 choice
Jul 28 22:16:02 gentoo dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in cold state, will try to load a firmware
Jul 28 22:16:02 gentoo dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
Jul 28 22:16:02 gentoo usb 4-2: USB disconnect, address 10
Jul 28 22:16:02 gentoo dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
Jul 28 22:16:04 gentoo usb 4-2: new high speed USB device using ehci_hcd and address 11
Jul 28 22:16:04 gentoo usb 4-2: configuration #1 chosen from 1 choice
Jul 28 22:16:04 gentoo dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in warm state.
Jul 28 22:16:04 gentoo dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul 28 22:16:04 gentoo DVB: registering new adapter (Leadtek - USB2.0 Winfast DTV dongle).
Jul 28 22:16:04 gentoo dib3000: Found a DiBcom 3000P.
Jul 28 22:16:04 gentoo DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)...
Jul 28 22:16:04 gentoo MT2060: successfully identified
Jul 28 22:16:05 gentoo input: IR-receiver inside an USB DVB receiver as /class/input/input3
Jul 28 22:16:05 gentoo dvb-usb: schedule remote query interval to 150 msecs.
Jul 28 22:16:05 gentoo dvb-usb: Leadtek - USB2.0 Winfast DTV dongle successfully initialized and connected.
|
dopo il reboot con nuovo kernel e moduli esterni:
| Code: | Jul 28 22:59:51 gentoo dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in cold state, will try to load a firmware
Jul 28 22:59:51 gentoo dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
Jul 28 22:59:51 gentoo usb 4-2: USB disconnect, address 4
Jul 28 22:59:51 gentoo dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
Jul 28 22:59:53 gentoo usb 4-2: new high speed USB device using ehci_hcd and address 5
Jul 28 22:59:53 gentoo usb 4-2: configuration #1 chosen from 1 choice
Jul 28 22:59:53 gentoo dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in warm state.
Jul 28 22:59:53 gentoo dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul 28 22:59:53 gentoo DVB: registering new adapter (Leadtek - USB2.0 Winfast DTV dongle).
Jul 28 22:59:53 gentoo Unable to handle kernel NULL pointer dereference at virtual address 0000010b
Jul 28 22:59:53 gentoo printing eip:
Jul 28 22:59:53 gentoo f955c721
Jul 28 22:59:53 gentoo *pde = 00000000
Jul 28 22:59:53 gentoo Oops: 0000 [#1]
Jul 28 22:59:53 gentoo PREEMPT
Jul 28 22:59:53 gentoo Modules linked in: dvb_usb_dibusb_mc dvb_usb_dibusb_common dvb_usb dib3000mc dib3000_common mt2060 8250_pnp$
Jul 28 22:59:53 gentoo CPU: 0
Jul 28 22:59:53 gentoo EIP: 0060:[<f955c721>] Not tainted VLI
Jul 28 22:59:53 gentoo EFLAGS: 00010286 (2.6.16-gentoo-r6 #5)
Jul 28 22:59:53 gentoo EIP is at dvb_dmxdev_init+0x11/0x1d0 [dvb_core]
Jul 28 22:59:53 gentoo eax: 000000ff ebx: 00000000 ecx: 00112ac4 edx: 00000000
Jul 28 22:59:53 gentoo esi: eeef47b4 edi: eeef47f8 ebp: eeef4788 esp: f75ebd00
Jul 28 22:59:53 gentoo ds: 007b es: 007b ss: 0068
Jul 28 22:59:53 gentoo Process khubd (pid: 6391, threadinfo=f75ea000 task=f7d0ca30)
Jul 28 22:59:53 gentoo Stack: <0>000000ff 00000163 ffffffff c01556b0 00112ac4 000000d2 00000163 f955e5ed
Jul 28 22:59:53 gentoo 00112ac4 00000000 00000000 eeef4000 eeef47f8 eeef4788 f96da959 eeef47b4
Jul 28 22:59:53 gentoo eeef4788 f96f80c0 f7fd4858 eeef4000 eeef4000 f96f7e54 00000000 eeef4000
Jul 28 22:59:53 gentoo Call Trace:
Jul 28 22:59:53 gentoo [<c01556b0>] vmalloc+0x20/0x30
Jul 28 22:59:53 gentoo [<f955e5ed>] dvb_dmx_init+0x3d/0x1c0 [dvb_core]
Jul 28 22:59:53 gentoo [<f96da959>] dvb_usb_dvb_init+0xe9/0x1f0 [dvb_usb]
Jul 28 22:59:53 gentoo [<f96d94c8>] dvb_usb_init+0xa8/0x170 [dvb_usb]
Jul 28 22:59:53 gentoo [<f96d9855>] dvb_usb_device_init+0x115/0x1e0 [dvb_usb]
Jul 28 22:59:53 gentoo [<f96f7027>] dibusb_mc_probe+0x27/0x30 [dvb_usb_dibusb_mc]
Jul 28 22:59:53 gentoo [<f942f5ec>] usb_probe_interface+0x6c/0xc0 [usbcore]
Jul 28 22:59:53 gentoo [<c0375415>] driver_probe_device+0xc5/0xf0
Jul 28 22:59:53 gentoo [<c0375440>] __device_attach+0x0/0x10
Jul 28 22:59:53 gentoo [<c037491d>] bus_for_each_drv+0x5d/0x80
Jul 28 22:59:53 gentoo [<c03754b2>] device_attach+0x62/0x70
Jul 28 22:59:53 gentoo [<c0375440>] __device_attach+0x0/0x10
Jul 28 22:59:53 gentoo [<c0374a95>] bus_add_device+0x35/0xd0
Jul 28 22:59:53 gentoo [<c037903c>] device_pm_add+0x4c/0x90
Jul 28 22:59:53 gentoo [<c03738bc>] device_add+0x11c/0x1c0
Jul 28 22:59:53 gentoo [<f942f157>] usb_set_configuration+0x327/0x490 [usbcore]
Jul 28 22:59:53 gentoo [<f9428a9a>] usb_new_device+0xaa/0x180 [usbcore]
Jul 28 22:59:53 gentoo [<f9429d8a>] hub_port_connect_change+0x27a/0x440 [usbcore]
Jul 28 22:59:53 gentoo [<f942000a>] snd_rawmidi_info_select_user+0x5a/0xa0 [snd_rawmidi]
Jul 28 22:59:53 gentoo [<f942a1aa>] hub_events+0x25a/0x4c0 [usbcore]
Jul 28 22:59:53 gentoo [<f942a429>] hub_thread+0x19/0xf0 [usbcore]
Jul 28 22:59:53 gentoo [<c012ec10>] autoremove_wake_function+0x0/0x60
Jul 28 22:59:53 gentoo [<c012ec10>] autoremove_wake_function+0x0/0x60
Jul 28 22:59:53 gentoo [<f942a410>] hub_thread+0x0/0xf0 [usbcore]
Jul 28 22:59:53 gentoo [<c012e6b6>] kthread+0xb6/0xf0
Jul 28 22:59:53 gentoo [<c012e600>] kthread+0x0/0xf0
Jul 28 22:59:53 gentoo [<c01013b5>] kernel_thread_helper+0x5/0x10
Jul 28 22:59:53 gentoo Code: 56 f9 c7 04 24 25 67 56 f9 e8 1c d9 bb c6 e9 73 ff ff ff 8d b4 26 00 00 00 00 55 57 56 53 83 ec 28 8b 74 24 3c 8b 46 10 89 04 24 <ff> 50 0$
Jul 28 22:59:57 gentoo udevd-event[18308]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:10.3/usb4/4-2/4-2:1.0/bus' failed
|
Moduli baggati? una configurazione del kernel sbagliata? o solo sfiga?? |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Fri Jul 28, 2006 9:34 pm Post subject: |
|
|
| Tintenstich wrote: | Jul 28 22:59:53 gentoo DVB: registering new adapter (Leadtek - USB2.0 Winfast DTV dongle).
Jul 28 22:59:53 gentoo Unable to handle kernel NULL pointer dereference at virtual address 0000010b |
Tanto risolto non mi sembra, quel errore di allocazione della memoria ha tutta l'aria di essere un bug nel modulo. Forse (ripeto, forse) dovuto a un mancato parametro da passare al modulo.
_________________
Ciao da me! |
|
| Back to top |
|
|
unz
l33t
Joined: 28 Jul 2004
Posts: 819
Location: Roma, Italia
|
| Posted: Fri Jul 28, 2006 10:42 pm Post subject: |
|
|
in teoria non dovresti fare l'insmod, dovrebbe fare tutto da solo.
Il supporto all'infrarossi è attivo nel kernel? La parte relativa ai firmware è tutta abilitata nel kernel | Code: | # Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
|
_________________
Ma che c'hai là? Sulla spalla!!!! http://lascimmia.it/ |
|
| Back to top |
|
|
Tintenstich
Apprentice
Joined: 25 Mar 2004
Posts: 192
|
| Posted: Sat Jul 29, 2006 1:01 pm Post subject: |
|
|
Ok, ricompilati moduli v4l-dvb a dovere , inseriti nel kernel , fatto reboot e tutto funziona alla perfezione!
Ho inserito i canali DVB-T nel channels.conf di VDR insieme a quelli per la scheda DVB-S (Skystar2) e VDR switcha tra i due device senza problemi!!
Grazie di tutto!! |
|
| Back to top |
|
|
|
Forum italiano (Italian) 
