| View previous topic :: View next topic |
| Author |
Message |
ultmtjstr
n00b
Joined: 28 Jul 2006
Posts: 3
Location: Billings, MT
|
 Posted: Fri Jul 28, 2006 4:09 am Post subject: CSS Encryption Issues with IDE-SCSI Emulation! |
 |
|
This is my first post to the forum, so hopefully I give all the information necessary for help. I am currently running a new Pentium M Dell Laptop, with a gig of ram and a 128 mb video card and am having problems playing back CSS encrypted movies with Mplayer, or Xine, or Ogle. I had put an earlier kernel version of Gentoo on here a few months back before Vista Beta launched. I took off to try the public beta of Vista and quickly regreted it. I then quickly threw Gentoo back on and have been plugging away with my programming, music and old school gaming emulators, but have not tried to watch dvd's since the re-build. My cdrom runs scsi emulation and is unable to set any kind of DMA do to reasons I don't understand. You can probably get most other information from my configs. I am currently running:
gcc (GCC) 3.4.6
X window System Version 7.0.0
Xine Version 0.99.4
XFCE-4 4.2.3.2
Here is my dmesg:
| Code: |
Linux version 2.6.16-gentoo-r12 (root@GENTOOLAPTOP) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-
8.7.9)) #4 SMP PREEMPT Thu Jul 27 20:35:18 Local time zone must be set--
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffda000 (usable)
BIOS-e820: 000000003ffda000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fc9b0
ACPI: RSDT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x3ffda7d3
ACPI: FADT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x3ffdb400
ACPI: MADT (v001 DELL CPi R 0x27d50913 ASL 0x00000047) @ 0x3ffdbc00
ACPI: MCFG (v016 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x3ffdbbc0
ACPI: BOOT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x3ffdb7c0
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3ffdabe6
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3ffdaa0e
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x3ffda813
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda4 hdc=ide-scsi
ide_setup: hdc=ide-scsi
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1862.385 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903584k/917504k available (3493k kernel code, 13500k reserved, 1201k data, 260k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3733.38 BogoMIPS (lpj=7466773)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Total of 1 processors activated (3733.38 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #04 (-#07) may be hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:03: ioport range 0x1060-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
pnp: 00:08: ioport range 0x900-0x90f has been reserved
pnp: 00:08: ioport range 0x910-0x91f has been reserved
pnp: 00:08: ioport range 0x920-0x92f has been reserved
pnp: 00:08: ioport range 0x930-0x93f has been reserved
pnp: 00:08: ioport range 0x940-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: dfd00000-dfefffff
PREFETCH window: d0000000-d7ffffff
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: dfc00000-dfcfffff
PREFETCH window: 50000000-51ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
Simple Boot Flag at 0x79 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1154034859.768:1): initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.26 [Flags: R/W].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
Linux agpgart interface v0.101 (c) Dave Jones
vesafb: ATI Technologies Inc., P22 , 01.00 (OEM: ATI MOBILITY RADEON (M24) )
vesafb: VBE version: 2.0
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 15000k, total 131008k
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (58 C)
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
xd: Out of memory.
b44.c:v0.97 (Nov 30, 2005)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
input: AT Translated Set 2 keyboard as /class/input/input0
eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:eb:67:b1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide1 at 0x170-0x177,0x376 on irq 15
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: DVD+-RW ND-6650A Rev: 102C
Type: CD-ROM ANSI SCSI revision: 00
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:5b09 84:4003 85:3469 86:1809 87:4003 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi1 : ata_piix
Vendor: ATA Model: WDC WD800VE-75HD Rev: 11.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
SCSI Media Changer driver v0.25
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contex
ts=[4/4]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
aoe: aoe_init: AoE v2.6-14 initialised.
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver ati_remote
drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver xpad
drivers/usb/input/xpad.c: X-Box pad driver:v0.0.5
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.5
wbsd: Copyright(c) Pierre Ossman
dcdbas: Dell Systems Management Base Driver (version 5.6.0-2)
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc000088c2121]
intel8x0_measure_ac97_clock: measured 55391 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel ICH6 with STAC9750,51 at 0xdffffe00, irq 16
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (7168 buckets, 57344 max) - 172 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 260k freed
kjournald starting. Commit interval 5 seconds
Adding 2008116k swap on /dev/sda3. Priority:-1 extents:1 across:2008116k
EXT3 FS on sda4, internal journal
|
When I attempt to run a CSS encrypted dvd with scsi cdrom emulation I get an error:
| Code: |
This is xine (X11 gui) - a free video player v0.99.4.
(c) 2000-2004 The xine Team.
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Can't allocate memory for file read!
libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient
libdvdread: Get key for /VIDEO_TS/VIDEO_TS.VOB at 0x00000172
libdvdread: Error cracking CSS key for /VIDEO_TS/VIDEO_TS.VOB (0x00000172)
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_01_0.VOB at 0x000001f9
|
However, if I run the program without the scsi emulation then it will load the VOB's perfectly but my video is choppy and skips.
My xorg.conf is:
| Code: |
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86con$
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF# O$
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
# Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
Group 27 # video
Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/local/"
# The module search path. The default path is shown here.
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
#Option "AutoRepeat" "500 30"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Alps GlidePoint"
Driver "synaptics"
Option "CorePointer"
# Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "15"
Option "FingerHigh" "25"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "MaxDoubleTapTime" "180"
Option "ClickTime" "100"
Option "FastTaps" "1"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "EdgeMotionMinZ" "30"
Option "EdgeMotionMaxZ" "150"
Option "EdgeMotionMinSpeed" "15"
Option "EdgeMotionMaxSpeed" "25"
Option "EdgeMotionUseAlways" "0"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.015"
Option "UpDownScrolling" "1"
Option "EmulateMidButtonTime" "75"
Option "TouchpadOff" "0"
Option "GuestMouseOff" "1"
Option "RTCornerButton" "0"
Option "RBCornerButton" "0"
Option "LTCornerButton" "0"
Option "LBCornerButton" "0"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "CircularScrolling" "0"
Option "CircularScrollDelta" "0.08"
Option "CircScrollTrigger" "0"
Option "CircularPad" "0"
Option "PalmDetect" "1"
Option "PalmMinWidth" "10"
Option "PalmMinZ" "200"
Option "CoastingSpeed" "0"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI open drivers"
Driver "ati"
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
# Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "on" # disable DRI mtrr mapper, driver has it$
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard""NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "on"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "on"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5460
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
# Option "backingstore"
Subsection "Display"
Depth 24
Modes "1920x1200"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Keyboard"
InputDevice "Alps GlidePoint"
EndSection
|
I am afraid that I might be doing something wrong in my configurations but all my other videos work fine and this one is ALMOST there, except choppy when I cut out my start-up command of hdc=ide-scsi.
Anyhelp would be greatly appreciated. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54308
Location: 56N 3W
|
| Posted: Fri Jul 28, 2006 12:38 pm Post subject: |
|
|
ultmtjstr,
Welcome to Gentoo.
You should not need ide-scsi (SCSI Emulation) with a 2.6.16-gentoo-r12 kernel but there are some exceptions.
You may be one of them too. The warning sign is, from your log
Your log shows that SCSI emulation was in use. | Code: | Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5 |
Run lspci (emerge pciutils) and check your Intel chipset. If its ICH6 or ICH7 use SCSI emualtion and turn off IDE support entirely, you are not using it anyway.
The problem is that the ICH6 and ICH7 chipsets have some control registers in common between the PATA and SATA functions and they can obly be set properly from the SATA side.
No need for lspic - you log also says | Code: | ALSA device list:
#0: Intel ICH6 with STAC9750,51 at 0xdffffe00, irq 16 |
You do have the ICH6 chipset.
Using SCSI emulation and disabling IDE should fix it.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ultmtjstr
n00b
Joined: 28 Jul 2006
Posts: 3
Location: Billings, MT
|
| Posted: Fri Jul 28, 2006 11:31 pm Post subject: |
|
|
I have got my SCSI Emulation to work perfectly fine. I took your advice and disabled IDE support all together and removed the pass-through to my kernel at boot, and it does automatically does emulation. This still didn't fix my problem however. With my SCSI emulation working, my "backup copied" dvd's play fine, as well as my older DVD movies. When I try to launch a newly purchase movie, for instance, Final Fantasy VII: Advent Children, it gives me an error of
| Code: | This is xine (X11 gui) - a free video player v0.99.4.
(c) 2000-2004 The xine Team.
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Can't allocate memory for file read!
libdvdread: Unable to read read TT_SRPT.
libdvdread: Using libdvdcss version 1.2.9 for DVD access
*** libdvdread: CHECK_VALUE failed in ifo_read.c:847 ***
*** for tt_srpt->nr_of_srpts < 100 ***
*** libdvdread: CHECK_VALUE failed in ifo_read.c:852 ***
*** for tt_srpt->title[i].nr_of_angles != 0 ***
*** libdvdread: CHECK_VALUE failed in ifo_read.c:857 ***
*** for tt_srpt->title[i].title_set_nr != 0 ***
*** libdvdread: CHECK_VALUE failed in ifo_read.c:859 ***
*** for tt_srpt->title[i].vts_ttn != 0 ***
|
If I take away my SCSI emulation, then my player will read this disc fine, but makes ALL my dvd playback choppy, including my older and backed-up DVD's. I am afraid that it is due to a configuration error. The special features disc runs fine under SCSI Emulation, but the main feature will not even start. My first guess was that the permissions were off on the /dev/sr0, but I am accessing as root, so no go on that. I am curious if it could be something to do with libdvdread? Not quite sure. Thanks again. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54308
Location: 56N 3W
|
| Posted: Sat Jul 29, 2006 11:02 am Post subject: |
|
|
ultmtjstr,
SCSI emulation and disabling IDE gets you DMA (for faster lower CPU use) on the CDROM reads.
When you use the CDROM as IDE, you don't get DMA and your playback is choppy as a result.
None of this should affect you ability to play any DVDs.
| Code: | libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Can't allocate memory for file read! |
does not look like a Emulated SCSI vs IDE issue.
Can you test with mplayer please?
It provides more verbose descriptions of whats happening and whats not. You will need to run it from the command line in an xterm.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
