| View previous topic :: View next topic |
| Author |
Message |
tourmark
n00b
Joined: 23 Nov 2004
Posts: 12
|
 Posted: Sat Jul 29, 2006 9:43 pm Post subject: promise fasttrak sx4300 |
 |
|
Hi guys
I've bought 2 days ago sx4300 sata card (spend a lot of money  ) because on promise site described than is full compatibility with linux. I didn't investigate a lot and I've tryed to compile module from source, but (since 2 days without success). I'm not an expert of C and I can't make neccessary patches by myself to arrange it with my lovely Gentoo. This is first time when I can't make function some hardware on gentoo, incredible...
My system:
- dual opteron x86_64
- 2 gb ram
| Code: | # uname -a
Linux lovelygentoo 2.6.15-gentoo-r4 #6 SMP Sat Jul 29 17:44:48 CEST 2006 x86_64 AMD Opteron(tm) Processor 242 GNU/Linux |
I've downloaded partial source from:
http://www.promise.com/support/download/download2_eng.asp?productID=147&category=all&os=100
next I follow all instructions, make some arrangments and I have still same compile error (since 24 hours, brrrrrrrr):
| Code: | #make DRIVER_SRC_DIR=`pwd`
make V=1 CC=cc LD=ld ARCH=x86_64 DRIVER_SRC_DIR=`pwd` -C /usr/src/linux M=`pwd` modules
make[1]: Entering directory `/usr/src/linux-2.6.15-gentoo-r4'
mkdir -p /work/install/partial/.tmp_versions
make -f scripts/Makefile.build obj=/work/install/partial
cc -Wp,-MD,/work/install/partial/.osd_main.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -march=k8 -mno-red-zone -mcmodel=kernel -pipe -fno-reorder-blocks -Wno-sign-compare -fno-asynchronous-unwind-tables -funit-at-a-time -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wdeclaration-after-statement -D_LINUXDRIVER -D_AMD64B -D_64BPLATFORM -I/usr/include -I/usr/src/linux/include -I/usr/src/linux/include/scsi -I/usr/src/linux/drivers -I/usr/src/linux/drivers/scsi -I -I/usr/src/linux/include/scsi -I/usr/src/linux/drivers -I/usr/src/linux/drivers/scsi -DMODULE -DKBUILD_BASENAME=osd_main -DKBUILD_MODNAME=napa -c -o /work/install/partial/osd_main.o /work/install/partial/osd_main.c
In file included from /work/install/partial/napa_cfg.h:9,
from /work/install/partial/osd_inc.h:65,
from /work/install/partial/osd_main.c:183:
/work/install/partial/cfg_linux.h:5:1: warning: "_AMD64B" redefined
<command line>:3:1: warning: this is the location of the previous definition
/work/install/partial/cfg_linux.h:6:1: warning: "_64BPLATFORM" redefined
<command line>:4:1: warning: this is the location of the previous definition
/work/install/partial/osd_main.c: In function `napa_init':
/work/install/partial/osd_main.c:1757: warning: implicit declaration of function `register_ioctl32_conversion'
/work/install/partial/osd_main.c:1769: error: `fasttrak_driver' undeclared (first use in this function)
/work/install/partial/osd_main.c:1769: error: (Each undeclared identifier is reported only once
/work/install/partial/osd_main.c:1769: error: for each function it appears in.)
/work/install/partial/osd_main.c: In function `napa_exit':
/work/install/partial/osd_main.c:1789: warning: implicit declaration of function `unregister_ioctl32_conversion'
make[2]: *** [/work/install/partial/osd_main.o] Error 1
make[1]: *** [_module_/work/install/partial] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.15-gentoo-r4'
make: *** [default] Error 2 |
I found same problems explain at:
asplinux
but without solution.
If someone can help me, save my 300 euros.
Alberto. |
|
| Back to top |
|
 |
pod32
n00b
Joined: 22 Aug 2006
Posts: 4
|
| Posted: Tue Aug 22, 2006 7:59 pm Post subject: |
|
|
have you allready tried the new linux source drivers?
i have the same controller with two xeon's.
please report a short [howto install] for this controller ;P
thanks and good luck! |
|
| Back to top |
|
|
rmdegennaro
n00b
Joined: 14 Sep 2005
Posts: 19
|
| Posted: Tue Aug 21, 2007 2:24 am Post subject: |
|
|
Almost 1 year later..... Anyone know if the SX4300 works with stock kernel sources or gentoo sources. I inherited an old server with a card, and will try soon. But wondering if I'll be wasting my time.
Thanks for any replies.
_________________
Laptop: Toshiba Satellite 5205-S505
2.2GHz Pentium-M, 1GB Ram, nVidia GeForce4 460 GO (64MB), Kernel: 2.6.21-gentoo-r4
Desktop: Homemade
AMD Athlon XP-M 2600, 2GB Ram, ATI Radeon RV350 (9550/256MB), Kernel: 2.6.21-gentoo-r4 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
