[SOLVED] FGLRX problems

[carl_1]

Hey all Im using the latest kernel, GCC 4.1 (Im in ~x86), Xorg 7.0, and the most current FGLRX in portage. Ive setup xorg.conf up right to my knowledge (will post) and ran ati-config --initial. Theres no DRI on in the kernel and AGPGART/chipset is compiled as a module in my kernel. FGLRX modprobes fine as does agpgart but I still have no DR. Heres the files:

/etc/X11/xorg.conf:

Code:

[/b] # File generated by xorgconfig. # # Copyright 2004 The X.Org Foundation # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of The X.Org Foundation shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from # The X.Org Foundation. # # ********************************************************************** # Refer to the xorg.conf(5x) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this  section  is used to specify # which dynamically loadable modules to load. # ********************************************************************** # # ********************************************************************** # Files section.  This allows default font and rgb paths to be set # ********************************************************************** # ********************************************************************** # Server flags section. # ********************************************************************** # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices.  This is for example only.  Refer # to the xorg.conf man page for a description of the options. # ********************************************************************** # # Section "InputDevice" #    Identifier  "Mouse2" #    Driver      "mouse" #    Option      "Protocol"      "MouseMan" #    Option      "Device"        "/dev/mouse2" # EndSection # # Section "InputDevice" #    Identifier "spaceball" #    Driver     "magellan" #    Option     "Device"        "/dev/cua0" # EndSection # # Section "InputDevice" #    Identifier "spaceball2" #    Driver     "spaceorb" #    Option     "Device"        "/dev/cua0" # EndSection # # Section "InputDevice" #    Identifier "touchscreen0" #    Driver     "microtouch" #    Option     "Device"        "/dev/ttyS0" #    Option     "MinX"          "1412" #    Option     "MaxX"          "15184" #    Option     "MinY"          "15372" #    Option     "MaxY"          "1230" #    Option     "ScreenNumber"  "0" #    Option     "ReportingMode" "Scaled" #    Option     "ButtonNumber"  "1" #    Option     "SendCoreEvents" # EndSection # # Section "InputDevice" #    Identifier "touchscreen1" #    Driver     "elo2300" #    Option     "Device"        "/dev/ttyS0" #    Option     "MinX"          "231" #    Option     "MaxX"          "3868" #    Option     "MinY"          "3858" #    Option     "MaxY"          "272" #    Option     "ScreenNumber"  "0" #    Option     "ReportingMode" "Scaled" #    Option     "ButtonThreshold"       "17" #    Option     "ButtonNumber"  "1" #    Option     "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: # Device configured by xorgconfig: # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present.  Each describes # the configuration of a single screen.  A single specific screen section # may be specified from the X server command line with the "-screen" # option. # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present.  Each describes # the way multiple screens are organised.  A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option.  In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone.  Section "DRI"     Mode 0666  EndSection Section "ServerLayout" # The Identifier line must be present # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens.  The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen.  In this example, screen 2 is located to the # right of screen 1. # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used.  Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents".    Identifier     "Simple Layout"    Screen      0  "aticonfig-Screen[0]" 0 0    InputDevice    "Mouse1" "CorePointer"    InputDevice    "Keyboard1" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database.  Note, this is the name of the # file minus the extension (like ".txt" or ".db").  There is normally # no need to change the default. #    RgbPath   "/usr/share/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # #    FontPath   "/usr/share/fonts/TTF" #    FontPath   "/usr/lib/X11/fonts/local/" #    FontPath   "/usr/lib/X11/fonts/misc/" #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled" #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled" #    FontPath   "/usr/lib/X11/fonts/Speedo/" #    FontPath   "/usr/lib/X11/fonts/Type1/" #    FontPath   "/usr/lib/X11/fonts/TrueType/" #    FontPath   "/usr/lib/X11/fonts/freefont/" #    FontPath   "/usr/lib/X11/fonts/75dpi/" #    FontPath   "/usr/lib/X11/fonts/100dpi/" # The module search path.  The default path is shown here. #    ModulePath "/usr/lib/modules"    FontPath     "/usr/share/fonts/misc"    FontPath     "/usr/share/fonts/75dpi"    FontPath     "/usr/share/fonts/100dpi"    FontPath     "/usr/share/fonts/Type1" EndSection Section "Module" # This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the font modules #    Load        "type1" #    Load        "speedo" # This loads the GLX module     Load       "glx" # This loads the DRI module     Load       "dri"    Load  "dbe"     # Double buffer extension    SubSection "extmod"       Option       "omit xfree86-dga"   # don't initialise the DGA extension    EndSubSection    Load  "freetype" #    Load        "xtt"    Load  "dri"    Load  "glx" EndSection Section "InputDevice" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. #    Option     "Protocol"      "Xqueue" #    Option   "Xleds"      "1 2 3" #    Option "LeftAlt"     "Meta" #    Option "RightAlt"    "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults).  For example, for a non-U.S. # keyboard, you will probably want to use: #    Option "XkbModel"    "pc105" # If you have a US Microsoft Natural keyboard, you can use: #    Option "XkbModel"    "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: #    Option "XkbLayout"   "de" # or: #    Option "XkbLayout"   "de" #    Option "XkbVariant"  "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: #    Option "XkbOptions"  "ctrl:swapcaps" # These are the default XKB settings for Xorg #    Option "XkbRules"    "xorg" #    Option "XkbModel"    "pc105" #    Option "XkbLayout"   "us" #    Option "XkbVariant"  "" #    Option "XkbOptions"  "" #    Option "XkbDisable"    Identifier  "Keyboard1"    Driver      "kbd"    Option       "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))    Option       "XkbRules" "xorg"    Option       "XkbModel" "pc101"    Option       "XkbLayout" "us" EndSection Section "InputDevice" # Identifier and driver # the following line. #    Option "Protocol"   "Xqueue" # Mouse-speed setting for PS/2 mouse. #    Option "Resolution"   "256" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. #    Option "BaudRate"   "9600" #    Option "SampleRate"   "150" # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5, # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than # 3 buttons and you need to map the wheel to different button ids to avoid # conflicts. # Emulate3Timeout is the timeout in milliseconds (default is 50ms) #    Option "Emulate3Buttons" #    Option "Emulate3Timeout"    "50" # ChordMiddle is an option for some 3-button Logitech mice #    Option "ChordMiddle"    Identifier  "Mouse1"    Driver      "mouse"    Option       "Protocol" "Auto"   # Auto detect    Option       "Device" "/dev/input/mouse0" # When using XQUEUE, comment out the above two lines, and uncomment    Option       "ZAxisMapping" "4 5 6 7" # Emulate3Buttons is an option for 2-button mice EndSection Section "Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. #    HorizSync   30-64         # multisync #    HorizSync   31.5, 35.2    # multiple fixed sync frequencies #    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS.    Identifier   "My Monitor"    HorizSync    31.5 - 79.0    VertRefresh  40.0 - 150.0 EndSection Section "Monitor"    Identifier   "aticonfig-Monitor[0]"    Option       "VendorName" "ATI Proprietary Driver"    Option       "ModelName" "Generic Autodetecting Monitor"    Option       "DPMS" "true" EndSection Section "Device" # The chipset line is optional in most cases.  It can be used to override # the driver's chipset detection, and should not normally be specified. #    Chipset   "generic" # The Driver line must be present.  When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module.  Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. # The BusID line is used to specify which of possibly multiple devices # this section is intended for.  When this line isn't present, a device # section can only match up with the primary video device.  For PCI # devices a line like the following could be used.  This line should not # normally be included unless there is more than one video device # intalled. #    BusID      "PCI:0:10:0" #    VideoRam   256 #    Clocks   25.2 28.3    Identifier  "Standard VGA"    Driver      "vga"    VendorName  "Unknown"    BoardName   "Unknown" EndSection Section "Device"    # unsupported card     #VideoRam    262144     # Insert Clocks lines here if appropriate    Identifier  "My Video Card"    Driver      "vga" EndSection Section "Device"    Identifier  "aticonfig-Device[0]"    Driver      "fglrx" EndSection Section "Screen"    Identifier "Screen 1"    Device     "My Video Card"    Monitor    "My Monitor"    DefaultDepth     24    SubSection "Display"       Viewport   0 0       Depth     8       Modes    "1280x1024" "1024x768" "800x600" "640x480"    EndSubSection    SubSection "Display"       Viewport   0 0       Depth     16       Modes    "1280x1024" "1024x768" "800x600" "640x480"    EndSubSection    SubSection "Display"       Viewport   0 0       Depth     24       Modes    "1280x1024" "1024x768" "800x600" "640x480"    EndSubSection EndSection Section "Screen"    Identifier "aticonfig-Screen[0]"    Device     "aticonfig-Device[0]"    Monitor    "aticonfig-Monitor[0]"    DefaultDepth     24    SubSection "Display"       Viewport   0 0       Depth     24    EndSubSection EndSection

[b]DMESG:

[CloudBolt]

if you could post your /var/log/Xorg.0.log (assuming you're using display 0, if not, replace the 0 with your display), with that, we could see what's wrong.
_________________
GNU/Linux is an operating system.
IBM OS/2 is half an operating system.
Windows is a shell.
DOS is a boot partition virus.

[wynn]

Have you run

[carl_1]

There were no errors in xorg log, and yea I ran eselect, but I got it working. The problem was emerge ati-drivers was putting the driver files in /usr/lib/xorg/modules/dri vs /usr/lib/modules/dri. A simple ln -s and all is good:)

Thanks for offerin the help