Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Cant startx - Failed to load module "<Modules>"
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 12:51 pm    Post subject: Cant startx - Failed to load module "<Modules>&qu Reply with quote

Hi all.

After a long time away from Linux and Gentoo, ive just done a gentoo 64 install.

After the intiall install I just did "emerge kde-meta" and let that run.

Im starting to think I should have read more before I did that. Should I have complied for 32 bit?

When I try to startx (not as root) I get the following errors:

(EE) Failed to load module "radeon" (module does not exist, 0)
(EE) "" "" "mouse" ""
(EE) "" "" "kbd" " "
(EE) No drivers available.

Fatal server error:
no screens found
XIO: fatal IO error 104
after 0 requests (0 known processed)

The only module I have running (lsmod) is ndiswrapper (which is working, need to set up wpa_supplicant one get KDE up)

To set my xorg.conf i just ran xorgconfig. xorg -configure threw "Fatal server error: Caught signal 11"

I can post my xorg.conf if needed.

Thanks for the help.
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 1:47 pm    Post subject: Reply with quote

You probably need to add something like...

Code:

VIDEO_CARDS = "radeon"
INPUT_DEVICES= "keyboard mouse"


...to your make.conf and reemerge xorg since you may have last installed it before it went "modular".
_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
ikshaar
Veteran
Veteran


Joined: 23 Jul 2002
Posts: 1339
Location: Baltimore, MD

PostPosted: Tue Aug 01, 2006 2:05 pm    Post subject: Reply with quote

http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml

See if you missed some steps may be... (on install part.. removal does not concern you)
_________________
"May God stands between you and harm in all the empty places where you must walk" - Babylon 5
Back to top
View user's profile Send private message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 2:07 pm    Post subject: Reply with quote

Thanks,

I added those and did a emerge xorg-x11. Just waiting for it run through.

Starting to think I should have got X sorted before niavly and blindly doing emerge kde-meta and hoping it would be all good....By doing things this way will there be any detrimental effects?

Thanks.
Back to top
View user's profile Send private message
ikshaar
Veteran
Veteran


Joined: 23 Jul 2002
Posts: 1339
Location: Baltimore, MD

PostPosted: Tue Aug 01, 2006 2:20 pm    Post subject: Reply with quote

A bit of a guess but X and KDE should be independent .. so should not matter...
_________________
"May God stands between you and harm in all the empty places where you must walk" - Babylon 5
Back to top
View user's profile Send private message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 2:33 pm    Post subject: Reply with quote

Right im getting there.

Now startx opens twm (only as root, normal user it thinks about but quits)

I did an emerge -p kde-meta and there is nothing there.

There is no "startkde" command therefore copying the command to .xinitrc doesnt work.

???

Thanks

<edit>

Ok, so ive done /usr/kde/3.5/bin/startkde (not as root)

xsetroot: unable to open dispaly ''
xset: unable to open display " "
kwin: cannot connect to X
kpersonliser cannot connect to X


Last edited by jammin on Tue Aug 01, 2006 2:40 pm; edited 1 time in total
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 2:35 pm    Post subject: Reply with quote

Kde went modular too B-)
_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 2:51 pm    Post subject: Reply with quote

jammin wrote:


<edit>

Ok, so ive done /usr/kde/3.5/bin/startkde (not as root)

xsetroot: unable to open dispaly ''
xset: unable to open display " "
kwin: cannot connect to X
kpersonliser cannot connect to X


Create a .xinitrc in your /home directory...

Code:

exec startkde


....then type startx at the command line.
_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 3:18 pm    Post subject: Reply with quote

Thanks, im now in KDE!

Its a very ugly KDE though, (its at 640x480). In xorg.conf i altered 8,16 and 24 bit colour so only 1280x1024 is there but still kde loads at this resolution. In kde itself and perhiperials there is only that resolution, no others to choose from?

Thanks

edit - when i exit kde there are a few background errors -

xset - bad font path eleement (#60)

could not find artswrapper executable and

Xlib: extension "GLX" missing on display "0:0"

edit2 - Ive uncommented the glx line in xorg, it doesnt throw that last error anymore but still looks ugly??

And also - kdecore (KLibLoader): WARNING: KLibrary: /usr/kde/3.5/lib64/kde3/kcm_kdnssd.so :undifinded symbol: init_kdnssd

X Error: BadWindow (invalid Window parameter) 3
Major Opcode 19
Minor Opcode 0

X Error: BadWindow (invalid Window parameter) 3
Major Opcode 7
Minor Opcode 0

X Error: BadWindow (invalid Window parameter) 3
Major Opcode 6
Minor Opcode 0


Last edited by jammin on Tue Aug 01, 2006 3:29 pm; edited 1 time in total
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 3:28 pm    Post subject: Reply with quote

jammin wrote:
Thanks, im now in KDE!

Its a very ugly KDE though, (its at 640x480). In xorg.conf i altered 8,16 and 24 bit colour so only 1280x1024 is there but still kde loads at this resolution. In kde itself and perhiperials there is only that resolution, no others to choose from?

Thanks


Did you enter the correct driver for your video card in your xorg.conf?

Example:

Code:

Section "Device"
   Identifier   "ATI Technologies, Inc. RV350 [Radeon 9600]"
   Driver      "ati"
   BusID      "PCI:1:0:0"
        Option         "AGPMode" "8"
EndSection

_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 3:47 pm    Post subject: Reply with quote

Thanks for all the help.

I have "radeon"; i just used xorgconfig. Xorg -configure did not run through. I still have the back ground errors i put in the edit of my last post:

Code:

kdecore (KLibLoader): WARNING: KLibrary: /usr/kde/3.5/lib64/kde3/kcm_kdnssd.so :undifinded symbol: init_kdnssd
 
 X Error: BadWindow (invalid Window parameter) 3
 Major Opcode 19
 Minor Opcode 0
 
 X Error: BadWindow (invalid Window parameter) 3
 Major Opcode 7
 Minor Opcode 0
 
 X Error: BadWindow (invalid Window parameter) 3
 Major Opcode 6
 Minor Opcode 0


Here is the lspci of my card -

Code:

05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)]
05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)] (Secondary)


Code:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath   "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi"
    FontPath   "/usr/share/fonts/100dpi"
#    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/Type1"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option   "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"
    Option "Protocol"    "Auto"   # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"   "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 79.0

#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier   "Standard VGA"
    VendorName   "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset   "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "radeon"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks   25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** ATI Radeon (generic)               [radeon]"
    Driver      "radeon"
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** ATI Radeon (generic)               [radeon]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection




This may sound stupid but should I just download the propertary ati - 64 bit drivers for linux from ati.com?

Thanks again
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 4:07 pm    Post subject: Reply with quote

jammin wrote:


This may sound stupid but should I just download the propertary ati - 64 bit drivers for linux from ati.com?



You may want to consider that, though your card should support 2D. Or at least it did with my X800 XL. Check /var/log/Xorg.0.log
for any errors loading the radeon device.

Code:

cat Xorg.1.log | grep EE

_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
jammin
Guru
Guru


Joined: 21 Jun 2004
Posts: 340

PostPosted: Tue Aug 01, 2006 4:19 pm    Post subject: Reply with quote

Ive downloaded the property drivers, installed and ran aticonfig - all is good!

Is there a command to check hardware gfx support is up and good?


Thanks

<edit> Not all good -

Code:

name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
    GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.2)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess


Thanks again for the help

<edit2>

# modprobe fglrx
# eselect opengl set ati
!!! Error: Unrecognized option: ati
exiting.


??
Back to top
View user's profile Send private message
EzInKy
Veteran
Veteran


Joined: 11 Oct 2002
Posts: 1742
Location: Kentucky

PostPosted: Tue Aug 01, 2006 4:37 pm    Post subject: Reply with quote

Your radeon driver and/or drm may still be loaded if you didn't rmmod them or reboot.
_________________
Time is what keeps everything from happening all at once.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum