| View previous topic :: View next topic |
| Author |
Message |
Jupiter1TX
Guru
Joined: 24 Feb 2006
Posts: 546
Location: 3rd Rock
|
 Posted: Wed Sep 27, 2006 9:58 pm Post subject: |
 |
|
| xanas3712 wrote: | The strace looks similar to a problem I had, but I don't believe it was related to flash at all. It was corrected by a later compiz revision and had to do with my 64 bit install. (I found this out by reading the compile log, there were 2 warnings that were the cause of the segfault)
Are you running amd64 or are you running x86?
If you are running amd64, then is it possible for you to do a gdb and bt (backtrace) this? You'd have need to have compiled with features=nostrip.
Also, which version of compiz-quinnstorm are you running? I had problems with this specifically with the cvs, and with 13.51-52 if I remember correctly. |
i had compiz-13.57 on a x86 system and everything was fine
had the animation plugin going realy cool
i appreeciate your help xanas3712 but, couldn't figure it out so
i figure my system is broken now so i might as well go for broke
i upgraded to xorg 7.1 with the new nvidia-drivers
setup sabayon overlay with layman and emerged beryl
and all it's dependancies,,, it's all working now
the new nvidia-drivers ROCKS,,, i got a 1000 fps increase in glxgears
zero@vger ~ $ glxgears
70484 frames in 5.0 seconds = 14096.671 FPS
70355 frames in 5.0 seconds = 14070.893 FPS
70223 frames in 5.0 seconds = 14044.485 FPS
70383 frames in 5.0 seconds = 14076.440 FPS
70379 frames in 5.0 seconds = 14075.648 FPS
_________________
Core i7 920 D0 | Asus P6T DLX | Patriot Viper 1600 6GB | Antec Quattro 850W
Geforce 8800GTX OC2 768MB | Dell 22" LCD | Koolance Exos2/Swiftech GTZ
GCC 4.6.1 | 3.7.x-geek | Xorg-7.4-x | KDE-4.7.x | Compiz |
|
| Back to top |
|
 |
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Thu Sep 28, 2006 12:08 am Post subject: |
|
|
| Xamindar wrote: | I just did an svn up and got this error:
| Code: | lain xgl-coffee # ./svnup.sh
Update from revision 448 ...
svn: Failed to add file 'x11-base/xorg-server/xorg-server-1.1.1-r1.ebuild': object of the same name already exists
lain xgl-coffee #
|
Are we not using svn for overlay checkouts any more? Layman seems more confusing and I don't see any info about svn in the new wiki. Do I need to recheckout my overlay using layman to get the latest? |
[sarcasm]Thanks for responding guys.[/sarcasm]
I'm still getting problems with the overlay as of late. I was able to do an emerge update but now my whole screen goes white when I log into gnome.
I am not able to emerge any more because of an error:
| Code: | >>> Emerging (1 of 3) x11-base/xorg-server-1.1.1-r1 to /
!!! Manifest file not found: '/usr/local/portage/xgl-coffee/x11-base/xorg-server/Manifest'
|
I did an svn up but it didn't fix it. |
|
| Back to top |
|
|
nesl247
Veteran
Joined: 15 Jun 2004
Posts: 1614
Location: Florida
|
| Posted: Thu Sep 28, 2006 2:06 am Post subject: |
|
|
| xorg-server is no longer in the coffeebuzz overlay, you must be using an old revision... |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Thu Sep 28, 2006 4:17 am Post subject: |
|
|
| nesl247 wrote: | | xorg-server is no longer in the coffeebuzz overlay, you must be using an old revision... |
So do I just unmerge it then? |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Thu Sep 28, 2006 8:29 am Post subject: |
|
|
| It still gives me the error after removing it. Why didn't an svn up remove it if it is no longer in the overlay? How do I do it manually sense svn didn't do it? |
|
| Back to top |
|
|
nesl247
Veteran
Joined: 15 Jun 2004
Posts: 1614
Location: Florida
|
| Posted: Thu Sep 28, 2006 10:35 am Post subject: |
|
|
| Xamindar wrote: | | It still gives me the error after removing it. Why didn't an svn up remove it if it is no longer in the overlay? How do I do it manually sense svn didn't do it? |
You shouldn't remove xorg-server.. Without it you can't have an X session.. There is what was in the overlay and in portage... |
|
| Back to top |
|
|
Henning Rogge
Apprentice
Joined: 20 Sep 2002
Posts: 178
|
| Posted: Thu Sep 28, 2006 12:02 pm Post subject: |
|
|
| msears wrote: | | I updated from compiz-quinnstorm-0.0.13.57 to 0.0.13.57-r1 yesterday, and since then when compiz starts, the screen goes completely white. Because of this, I have yet to get any output so I can't further identify the problem. And just to make it harder, it seems 13.57 has been removed from the overlay. However I did downgrade to 13.56 and it does the same. I recently updated xgl as well, which I will try to downgrade. Does anyone have any insight into the problem? |
Just emerge the 1.4.7 of glproto...
emerge -1 =glproto-1.4.7
It seems there are some problems between XGL/compiz and glproto-1.4.8 |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Thu Sep 28, 2006 3:59 pm Post subject: |
|
|
| nesl247 wrote: | | There is what was in the overlay and in portage... |
What?
Thanks for the help, but I do not understand what you are getting at. If you are saying to just use the one in portage instead of the overlay then why is it even still in the overlay? Seems kind of pointless to keep something in it and force people to figure out a way around it. |
|
| Back to top |
|
|
boniek
Guru
Joined: 26 Mar 2005
Posts: 373
|
|
| Back to top |
|
|
msears
n00b
Joined: 15 Aug 2006
Posts: 30
|
| Posted: Thu Sep 28, 2006 6:10 pm Post subject: |
|
|
| Henning Rogge, thank you for your help. |
|
| Back to top |
|
|
Bloot
Tux's lil' helper
Joined: 10 Mar 2006
Posts: 99
Location: Barcelona
|
| Posted: Thu Sep 28, 2006 11:26 pm Post subject: |
|
|
| In my case I solved the white screen downgrading xgl version from 0.0.1_pre20060928 to 0.0.1_pre20060823-r1. So I put x11-base/xgl-0.0.1_pre20060928 in my /etc/portage/package.mask. |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Fri Sep 29, 2006 6:21 am Post subject: |
|
|
| Bloot wrote: | | In my case I solved the white screen downgrading xgl version from 0.0.1_pre20060928 to 0.0.1_pre20060823-r1. So I put x11-base/xgl-0.0.1_pre20060928 in my /etc/portage/package.mask. |
Dang, didn't work for me. It seems that it doesn't turn white until compiz is loaded so I am downgrading compiz at the moment to see if that fixes it.
BTW, who is in charge of the overlay? It is still messed up. It would be nice to get it fixed soon, it has been a couple of days now. |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Fri Sep 29, 2006 5:33 pm Post subject: |
|
|
Ok, the white screen is gone now after I went down to a previous version of glproto and reemerged xgl. Thanks to another thread for that.  |
|
| Back to top |
|
|
Henning Rogge
Apprentice
Joined: 20 Sep 2002
Posts: 178
|
| Posted: Fri Sep 29, 2006 7:31 pm Post subject: |
|
|
| msears wrote: | | Henning Rogge, thank you for your help. |
Had the same problem and got a sollution from the portage-xgl forum.
http://forums.xgl-coffee.org/index.php |
|
| Back to top |
|
|
Phlogiston
Veteran
Joined: 27 Jan 2004
Posts: 1925
Location: Europe, Swizerland
|
| Posted: Sat Sep 30, 2006 5:52 pm Post subject: |
|
|
| Xamindar wrote: | | Ok, the white screen is gone now after I went down to a previous version of glproto and reemerged xgl. Thanks to another thread for that. |
Is the downgrade of Xgl mandatory? I'm having the same issue....
fixed...
_________________
Workstation: 5.1 SurroundSound, LIRC remote control; Laptop [IBM-T43]: patched sources, s2disk/ram, fingerprint sensor |
|
| Back to top |
|
|
Xamindar
Veteran
Joined: 03 Oct 2004
Posts: 1155
Location: California
|
| Posted: Sat Sep 30, 2006 10:36 pm Post subject: |
|
|
| Phlogiston wrote: | | Xamindar wrote: | | Ok, the white screen is gone now after I went down to a previous version of glproto and reemerged xgl. Thanks to another thread for that. |
Is the downgrade of Xgl mandatory? I'm having the same issue....
fixed... |
No, I only re-emerged xgl. |
|
| Back to top |
|
|
Bloot
Tux's lil' helper
Joined: 10 Mar 2006
Posts: 99
Location: Barcelona
|
| Posted: Sun Oct 01, 2006 12:06 am Post subject: |
|
|
| It's somehow weird all these problems with the white screen, I have no problems with the latest glproto but I had with the latest xgl version. Now, with beryl-core, I had to upgrade to the latest xgl again to solve that problem. Maybe it depends on the system architecture, I'm running on x86_64. |
|
| Back to top |
|
|
May-C
Apprentice
Joined: 06 Sep 2004
Posts: 173
Location: Schweiz
|
| Posted: Sun Oct 01, 2006 2:32 pm Post subject: |
|
|
I had the white screen problem too but only with beryl-manager. If I use follwing:
| Code: | | LD_LIBRARY_PATH=/usr/lib/opengl/xorg-x11/lib beryl-start |
everything works just fine. Rather strange. |
|
| Back to top |
|
|
Beinii
n00b
Joined: 21 Sep 2006
Posts: 46
Location: Salo, Finland
|
| Posted: Sun Oct 01, 2006 3:07 pm Post subject: |
|
|
I had the white screen problem whit compiz-quinnstorm and glproto 1.4.8, downgrading glproto to 1.4.7 fixed it.
Beryl works fine with glproto 1.4.8 for me.. |
|
| Back to top |
|
|
Zarathustra[H]
Guru
Joined: 30 Dec 2002
Posts: 389
Location: Cambridge, MA, USA
|
| Posted: Mon Oct 02, 2006 10:05 pm Post subject: |
|
|
I have thw white screen problem on my X86-64 nvidia system. I have tried downgrading GL-proto as well as XGL without success..
I am using quinnstorm. What is this Beryl you are all talking about? Maybe this will help me fix it?
_________________
----
Athlon 64 3000+ / 1Gb Kingston Hyperx PC3500 / MSI K8N Neo / Geforce 6800GT
---- |
|
| Back to top |
|
|
msears
n00b
Joined: 15 Aug 2006
Posts: 30
|
| Posted: Tue Oct 03, 2006 5:38 am Post subject: |
|
|
| The overlay currently has a little problem. I kept trying to update beryl-core, but it told me there was no ebuild for beryl-plugins. I racked my brain and my computer over this, messed with my overlays, etc. Finally I realized the problem. The dependency in beryl-core is for "x11-misc/beryl-plugins". However, the ebuild in the overlay is "x11-plugins/beryl-plugins." So I copied the folder from the x11-plugins folder to the x11-misc folder, and all is well again. Is there a way I can alert someone who can change this in the overlay? |
|
| Back to top |
|
|
TemplarKnight
Guru
Joined: 14 Jun 2005
Posts: 311
Location: Greece/patras/
|
| Posted: Tue Oct 03, 2006 11:41 am Post subject: |
|
|
Hi people, i have some trouble getting XGL to work again after a fresh gentoo install i did. I followed the wiki and chose to use beryl instead of compliz. I launch XGL using:
| Code: | | Xgl :1 -ac -accel glx:pbuffer -accel xv:pbuffer |
(ati card)
and beryl with:
| Code: | | DISPLAY=:1 dbus-launch beryl-manager |
to have XGL in a seperate window.
The thing is that menus are toooooooooo slow to apear, e.g. right click on a new kde desktop takes ages, typing in xterm also is bad and so on. Effects like cube, moving, minimizing work good.
Is there something i'm missing here??
| Code: |
hydra ~ # ps -A|grep be
32592 ? 00:00:00 beryl-manager
32657 ? 00:00:00 beryl-xgl
hydra ~ # ps -A|grep eme
32644 ? 00:00:00 emerald |
This is the output from beryl:
| Code: |
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't find a Selection Owner, perhaps no WM running?
Otherwise, manually kill your wm, and report the bug to the developers, it doesn't follow the standards.
Falling back to looking for a defined WM in xlsclients.
XGL Present
Initiating splash
Couldn't load settings. Reverting to defaults.
Couldn't load theme. Reverting to defaults.
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
** (beryl-manager:32592): WARNING **: Couldn't open /proc//environ
X connection to :1.0 broken (explicit kill or server shutdown).
XGL Present
Initiating splash
|
Any help pliz? |
|
| Back to top |
|
|
TemplarKnight
Guru
Joined: 14 Jun 2005
Posts: 311
Location: Greece/patras/
|
| Posted: Tue Oct 03, 2006 12:41 pm Post subject: |
|
|
I forgot to mention that i'm using fglrx driver:
| Code: | hydra birbilakos # /opt/ati/bin/fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.5946 (8.27.10) |
and
| Code: | hydra birbilakos # glxinfo |grep direct
direct rendering: Yes |
Any ideas??? |
|
| Back to top |
|
|
faugusztin
n00b
Joined: 15 May 2005
Posts: 47
|
| Posted: Tue Oct 03, 2006 12:46 pm Post subject: |
|
|
| TemplarKnight wrote: | I forgot to mention that i'm using fglrx driver:
| Code: | hydra birbilakos # /opt/ati/bin/fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.5946 (8.27.10) |
and
| Code: | hydra birbilakos # glxinfo |grep direct
direct rendering: Yes |
Any ideas??? |
XGL + KDE + fglrx + not running compiz/beryl = 100% CPU usage.
And as you can see, your compiz/beryl didn't started due error "Couldn't open /proc//environ". |
|
| Back to top |
|
|
TemplarKnight
Guru
Joined: 14 Jun 2005
Posts: 311
Location: Greece/patras/
|
| Posted: Tue Oct 03, 2006 2:04 pm Post subject: |
|
|
| faugusztin wrote: |
XGL + KDE + fglrx + not running compiz/beryl = 100% CPU usage.
And as you can see, your compiz/beryl didn't started due error "Couldn't open /proc//environ". |
So? What's that supossed to mean?
Tried with 8.29.6 drivers, no luck  |
|
| Back to top |
|
|
|
Unsupported Software
