| View previous topic :: View next topic |
| Author |
Message |
BaNaNe
Guru
Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...
|
 Posted: Sat Aug 26, 2006 3:14 pm Post subject: [ACPI] Crash de Xorg au réveil [Résolu] |
 |
|
Bonjour à tous!
Je viens requérir votre aide pour un problème bizare.
J'ai un portable basé sur l'architecture Centrino: Centrino 2Ghz, 1Go de ram, carte graphique intel 855GM.
J'avais réussi à faire fonctionner la mise en veille du portable : je le ferme, il se met en veille, je le rouvre, il se réveille sans problème.
Sauf que depuis un certains temps (qui correspond peut etre à la mise à jours vers xorg7.0), quand je le réveille, xorg crash. Je vois le pointeur de la souris une seconde ou deux puis l'écran semble clignoter deux fois puis je me retrouve en console. Si j'ai le maleur d'appuyer sur CTRL+ALT+F7, la console plante à son tour. Tout ce qu'il me reste à faire est d'appuyer sur le bouton power pour arrêter le portable.
J'ai essayé de recueillir le plus possible de log:
Xorg.0.log
| Code: |
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
(--) TouchPad auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) TouchPad touchpad found
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
Error in I830WaitLpRing(), now is 1258450779, start is 1258448778
pgetbl_ctl: 0x3fee0001 pgetbl_err: 0x0
ipeir: 0 iphdr: 2000011
LP ring tail: 8 head: 24 len: 1f001 start 0
eir: 0 esr: 0 emr: ffff
instdone: ff41 instpm: 0
memmode: 108 instps: 422
hwstam: ffff ier: 2 imr: 9 iir: a0
space: 20 wanted 40
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xf8901000 at 0xb7f0e000
Fatal server error:
lockup
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
the saved state
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(WW) I810(0): Successfully set original devices (2)
|
hibernate.log
| Code: |
Starting suspend at Sat Aug 26 17:03:39 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: [01] Executing LockFileGet ...
hibernate-ram: [01] Executing NewKernelFileCheck ...
hibernate-ram: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate-ram: [11] Executing XHacksSuspendHook1 ...
hibernate-ram: [89] Executing SaveKernelModprobe ...
hibernate-ram: [91] Executing ModulesUnloadBlacklist ...
hibernate-ram: [95] Executing XHacksSuspendHook2 ...
hibernate-ram: [97] Executing VbetoolSaveState ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
hibernate-ram: [97] Executing VbetoolRestoreState ...
hibernate-ram: [90] Executing ModulesLoad ...
hibernate-ram: [89] Executing RestoreKernelModprobe ...
hibernate-ram: [85] Executing XHacksResumeHook2 ...
hibernate-ram: [70] Executing ClockRestore ...
hibernate-ram: [11] Executing XHacksResumeHook1 ...
hibernate-ram: [01] Executing NoteLastResume ...
hibernate-ram: [01] Executing LockFilePut ...
Resumed at Sat Aug 26 17:04:03 CEST 2006
Starting suspend at Sat Aug 26 17:04:03 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: Less than 3 seconds since last resumed. Not suspending.
hibernate-ram: Aborting suspend due to errors in CheckLastResume (use --force to override).
hibernate-ram: [01] Executing NoteLastResume ...
hibernate-ram: [01] Executing LockFilePut ...
Resumed at Sat Aug 26 17:04:03 CEST 2006
|
dmesg
| Code: |
Stopping tasks: =========================================================|
eth1: Going into suspend...
ACPI: PCI interrupt for device 0000:02:01.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Back to C!
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: f200000000000181
ipw2200: Unable to load ucode: -22
ipw2200: Unable to load firmware: -22
ipw2200: Failed to up device
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
eth1: Coming out of suspend...
PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Enabling device 0000:02:04.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Restarting tasks...<6>usb 1-1: USB disconnect, address 2
usb 1-1.4: USB disconnect, address 3
done
usb 1-1: new high speed USB device using ehci_hcd and address 4
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
usb 1-1.4: new low speed USB device using ehci_hcd and address 5
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.7-1.4
mtrr: base(0xe8020000) is not aligned on a size(0x3e8000) boundary
|
Voilà, je ne suis pas sûr de donner toutes les infos, ou j'en donne peut etre trop. Le problème est que je ne sais pas d'où peut provenir ce crash.
Merci pour votre aide!
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO |
|
| Back to top |
|
 |
BaNaNe
Guru
Joined: 18 May 2003
Posts: 327
Location: Vous êtes ici...
|
| Posted: Sun Aug 27, 2006 3:05 pm Post subject: |
|
|
Je pense que je viens de résoudre mon problème.
En lisant le fichier /etc/hibernate/hibernate.conf, je me suis rendu compte que le système était configuré pour utilisé suspend2 (patch du noyau). Or, je pense me souvenir avoir utilisé l'acpi pour gérer la mise en veille et je n'ai jamais installé le patch du noyau suspend2. J'ai donc changé la config pour utiliser l'acpi et ca fonctionne comme avant!!!
Donc, dans le fichier /etc/hibernate/hibernate.conf : commenter la ligne :
Et décommenter la ligne :
Il faut aussi changer le 4 en 3 pour le suspend to ram au lieu du suspend to disque :
Et la mise en veille se remet à fonctionner comme avant!
_________________
Comme c'est à la mode de mettre la config de tous ses pc...
Desktop : Intel Q9550 + 4Go DDR2 + 640Go & 1To Sata2 + HD4870
Portable : Centrino 2ghz 1Go DDR 160GO
Server Fichier : PII 400Mhz 640SDR 200GO |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
