| View previous topic :: View next topic |
| Author |
Message |
kryven
n00b
Joined: 28 Aug 2006
Posts: 2
|
 Posted: Mon Aug 28, 2006 7:23 pm Post subject: PCMCIA-CS to PCMCIAutils Troubles |
 |
|
Recently I've been working on setting my Inspiron 5100 with Gentoo, and for the most part, everything seemed to be working. I noticed that dmesg output was stating:
I looked at the following guide here on the forums and followed the instructions. When I rebooted my machine with my wireless card plugged in, I was met with the following error: | Quote: | pcmcia: registering new device pcmcia0.0
hostap_cs: Registered netdevice wifi0
unexpected IRQ trap at vector 58
hostap_cs: index 0x01: , irq 11, io 0xd100-0xd13f |
Removing the card allowed me to boot without a problem, but if I insert it into the machine, I get a hard lock and have to power everything down. I'm relatively new to Gentoo, so if there are any command outputs that would help, please let me know and I'll post them as soon as I can. |
|
| Back to top |
|
 |
kryven
n00b
Joined: 28 Aug 2006
Posts: 2
|
| Posted: Mon Aug 28, 2006 9:47 pm Post subject: |
|
|
As a quick update, it seems that additional options I'm passing my kernel to manage ACPI events are causing the problem. Currently I am passing "acpi_irq_balance lapic irqpoll" to the kernel. If I only include two of those options, my machine boots without a problem with the PCMCIA card inserted, as well as having no problem inserting it while the machine is on. However, with all three options enabled, I get the cold lock.
To make matters worse, ACPI events no longer register using only two out of three options (screen turning off when the lid closes, etc).
I'm not sure if the options are order-dependent, but I suppose thats the next thing I need to test... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
