| View previous topic :: View next topic |
| Author |
Message |
nyk
Guru
Joined: 28 Aug 2004
Posts: 527
Location: Bern (Switzerland)
|
 Posted: Thu Aug 31, 2006 2:03 pm Post subject: i801 Graphic Controller problems with xorg 7.1 |
 |
|
I have a Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller in my IBM X60 Thinkpad.
I use the i810 driver with xorg 7.1 (i386), but it doesn't work as I get no higher resolution than 1024x768 and no 3D opengl acceleration. It just works like vesa, but I specified the i810 in xorg.conf.
I tried xorg 7.0 before and I also didn't work.
I use these package.keywords for xorg-x11:
| Code: | # Unmask X.org X11R7.1
media-libs/mesa
x11-drivers/xf86-video-vmware
x11-drivers/xf86-input-evdev
x11-drivers/xf86-input-mouse
x11-drivers/xf86-input-keyboard
x11-base/xorg-server
x11-apps/mesa-progs
x11-base/xorg-x11
x11-drivers/xf86-video-i810
x11-drivers/xf86-video-vesa
sys-apps/855resolution |
This is my xorg.conf
| Code: |
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
Load "i2c"
Load "ddc"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 50-90
VertRefresh 50-90
EndSection
Section "Device"
Identifier "i915GM"
Driver "i810"
VendorName "all"
BoardName "all"
Option "DRI" "True"
Option "XVideo" "True"
EndSection
Section "Screen"
Identifier "TheScreen"
Device "i915GM"
Monitor "Monitor0"
Option "FlatPanelProperties" "Scaling=Centered"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "TheScreen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
Is this a problem that can be solved somehow?
This is an interesting part of the xorg log:
| Code: |
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)Calistoga Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)Calistoga Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) I810(0): Chipset: "945GM"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xEE100000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): Kernel reported 110080 total, 1 used
(II) I810(0): I830CheckAvailableMemory: 440316 kB available
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
....
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)Calistoga Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)Calistoga Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(==) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1248
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (720,400)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Size of device LFP (local flat panel) is 1024 x 768
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1024 x 768
(==) I810(0): Display is using Pipe B
...
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: LEN Model: 4000 Serial#: 0
(II) I810(0): Year: 2005 Week: 0
(II) I810(0): EDID Version: 1.3
(II) I810(0): Digital Display Input
(II) I810(0): Max H-Image Size [cm]: horiz.: 25 vert.: 18
(II) I810(0): Gamma: 2.20
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.568 redY: 0.331 greenX: 0.312 greenY: 0.544
(II) I810(0): blueX: 0.148 blueY: 0.132 whiteX: 0.312 whiteY: 0.328
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 640x480@60Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 54.2 MHz Image Size: 246 x 185 mm
(II) I810(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) I810(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 43.3 MHz Image Size: 246 x 185 mm
(II) I810(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) I810(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) I810(0): HT121X01-101
|
|
|
| Back to top |
|
 |
bec
Apprentice
Joined: 30 Sep 2004
Posts: 220
Location: Cali - Colombia
|
| Posted: Thu Aug 31, 2006 2:26 pm Post subject: |
|
|
Hello,
I have an intel 865G, and my parameters in xorg.conf for the monitor are:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
_________________
abe |
|
| Back to top |
|
|
nyk
Guru
Joined: 28 Aug 2004
Posts: 527
Location: Bern (Switzerland)
|
| Posted: Thu Aug 31, 2006 5:48 pm Post subject: |
|
|
| I tried them and it is still not high-res and no 3D acceleration. |
|
| Back to top |
|
|
Kenji Miyamoto
Veteran
Joined: 28 May 2005
Posts: 1452
Location: Looking over your shoulder.
|
| Posted: Thu Aug 31, 2006 5:54 pm Post subject: |
|
|
You may also want to install x11-drm.
_________________
[ Kawa-kun, new and improved!! ]
Alex Libman seems to be more of an anarchist than a libertarian. |
|
| Back to top |
|
|
nyk
Guru
Joined: 28 Aug 2004
Posts: 527
Location: Bern (Switzerland)
|
| Posted: Thu Aug 31, 2006 6:29 pm Post subject: |
|
|
I did this now, but resolution is the same and now I get no "you have software rendering only" warning anymore from googleearth (and probably any other opengl app), but rendering is even slower than before. Any ideas?
Here is the output of glxinfo, if that might be related...
| Code: |
thinkpad nyk # glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x31
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM 20050225 x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 6.5
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_equation_separate,
GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array,
GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_3DFX_texture_compression_FXT1, GL_APPLE_client_storage,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
