| View previous topic :: View next topic |
| Author |
Message |
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
 Posted: Thu Jun 15, 2006 2:57 pm Post subject: CUPS 1.2.1 Printing Problem |
 |
|
Ok,
So the topic is not very descriptive... Here is the issue. When I try to print something I get the following error:
| Code: |
client-error-document-format-not-supported
|
So, I started to do some investigating and I found that I was supposed to re-emerge everything that went into the /etc/cups directory, so I did and restarted cups and got the same error. So, I dug deeper. Lets look at the log file.
| Code: |
I [15/Jun/2006:09:38:51 -0500] Listening to 127.0.0.1:631 (IPv4)
I [15/Jun/2006:09:38:51 -0500] Listening to /var/run/cups/cups.sock (Domain)
I [15/Jun/2006:09:38:51 -0500] Loaded configuration file "/etc/cups/cupsd.conf"
I [15/Jun/2006:09:38:51 -0500] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [15/Jun/2006:09:38:51 -0500] Configured for up to 100 clients.
I [15/Jun/2006:09:38:51 -0500] Allowing up to 100 client connections per host.
I [15/Jun/2006:09:38:51 -0500] Using policy "default" as the default!
I [15/Jun/2006:09:38:51 -0500] Full reload is required.
I [15/Jun/2006:09:38:51 -0500] Loaded MIME database from '/etc/cups': 1 types, 0 filters...
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "topsecret" ("/usr/share/cups/banners/topsecret") is of an unknown file type - skipping!
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "secret" ("/usr/share/cups/banners/secret") is of an unknown file type - skipping!
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "confidential" ("/usr/share/cups/banners/confidential") is of an unknown file type - skipping!
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "unclassified" ("/usr/share/cups/banners/unclassified") is of an unknown file type - skipping!
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "standard" ("/usr/share/cups/banners/standard") is of an unknown file type - skipping!
W [15/Jun/2006:09:38:51 -0500] add_banner: Banner "classified" ("/usr/share/cups/banners/classified") is of an unknown file type - skipping!
I [15/Jun/2006:09:38:51 -0500] Loading job cache file "/var/cache/cups/job.cache"...
I [15/Jun/2006:09:38:51 -0500] Full reload complete.
I [15/Jun/2006:09:38:51 -0500] Listening to 127.0.0.1:631 on fd 0...
I [15/Jun/2006:09:38:51 -0500] Listening to /var/run/cups/cups.sock on fd 2...
|
What I find the most interesting is the line that states that it can only find one type of MIME entry and no filters. I do not understand this. I looked at the file and it looks ok.
So, I am thinking that this is the problem with the print job. I dunno. When I try to print something this is what appears in the error_log file.
| Code: |
E [15/Jun/2006:09:52:05 -0500] Print-Job client-error-document-format-not-supported: Unsupported format 'application/octet-stream'!
I [15/Jun/2006:09:52:05 -0500] Hint: Do you have the raw file printing rules enabled?
|
|
|
| Back to top |
|
 |
asommer
n00b
Joined: 15 Nov 2005
Posts: 36
|
| Posted: Thu Jun 15, 2006 3:23 pm Post subject: |
|
|
Just wondering what kind of printer you're printing too?
Do you have more than one printer? Is it locally connected or networked?
_________________
Party On! |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Thu Jun 15, 2006 3:35 pm Post subject: |
|
|
Well,
I am just using networked printers, like HP 8150 and so on. I have no locally connected printers. But I think this is a deeper problem, since the problem seems to appear when the cups daemon is started. |
|
| Back to top |
|
|
asommer
n00b
Joined: 15 Nov 2005
Posts: 36
|
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Thu Jun 15, 2006 4:05 pm Post subject: |
|
|
The printers have ppds from the foomatic package and they are postscript printer that dont even need native drivers (well straight through postscript would work).
But, I am not thinking this is a driver problem. I think that I say hey, print this postscript file and cupsd says, I dont know what a postscript file is, so I dont know how to handle it. Ohh well, I will just spit out an error message (as unclear as it is)....
When cupsd loads up it should read in and recognize like 30 or so MIME types and have the appropriate filters for them.
My log files say this is not so. |
|
| Back to top |
|
|
asommer
n00b
Joined: 15 Nov 2005
Posts: 36
|
| Posted: Thu Jun 15, 2006 4:58 pm Post subject: |
|
|
Sorry I just realized I'm running cups-1.1.23.
Are them some other deps that you're missing?
_________________
Party On! |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Thu Jun 15, 2006 5:28 pm Post subject: |
|
|
Well,
Not that I am aware of. I mean I type emerge cups and it installed what it needed. I think this is a read cups bug or something. I have looked at the mime.types file and there is more than one defined. it is not reading the file correctly. |
|
| Back to top |
|
|
asommer
n00b
Joined: 15 Nov 2005
Posts: 36
|
| Posted: Thu Jun 15, 2006 5:37 pm Post subject: |
|
|
Sorry I'm out of ideas. Have you tried asking about it on IRC?
I guess I don't know as much about Cups as I thought I did.
_________________
Party On! |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Thu Jun 15, 2006 5:40 pm Post subject: |
|
|
IRC has no responce to this question. That is why I have come to the forums.
I also have not been able to find any info online or in the cups forums |
|
| Back to top |
|
|
Maedhros
Bodhisattva
Joined: 14 Apr 2004
Posts: 5511
Location: Durham, UK
|
| Posted: Thu Jun 15, 2006 6:08 pm Post subject: |
|
|
Moved from Installing Gentoo to Kernel & Hardware.
_________________
No-one's more important than the earthworm. |
|
| Back to top |
|
|
blake121666
Tux's lil' helper
Joined: 21 Apr 2004
Posts: 75
Location: Catonsville, MD
|
| Posted: Fri Jun 16, 2006 1:14 am Post subject: mime.convs |
|
|
Did you uncomment out the line in /etc/cups/mime.convs:
| Code: | | application/octet-stream application/vnd.cups-raw |
I think this might be your problem. For some reason I have to reboot my machine for cups to initialize after changes (not just stop and start cupsd). I'm not sure why ... but I suggest you do the same.
_________________
--Blake |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Fri Jun 16, 2006 1:21 am Post subject: |
|
|
| Well, it did not do any good. (I did not reboot though. That seemed wierd) |
|
| Back to top |
|
|
blake121666
Tux's lil' helper
Joined: 21 Apr 2004
Posts: 75
Location: Catonsville, MD
|
| Posted: Fri Jun 16, 2006 1:23 am Post subject: |
|
|
That *is* weird. But please do it ... it can't hurt.
_________________
--Blake |
|
| Back to top |
|
|
blake121666
Tux's lil' helper
Joined: 21 Apr 2004
Posts: 75
Location: Catonsville, MD
|
| Posted: Fri Jun 16, 2006 1:45 am Post subject: my config |
|
|
Oh, BTW, here is my cupsd.conf for version 1.1.23. Cups is a *very* persnickety program and it took me way too long to get something working. Maybe this might help you:
| Code: |
DocumentRoot /usr/share/cups/docs
LogLevel info
MaxLogSize 0
Printcap /etc/printcap
<Location /admin>
AuthType Basic
AuthClass System
Order Deny,Allow
Deny From All
Allow From 192.168.1.0/24
</Location>
<Location /printers/hp4500>
Order Deny,Allow
Deny From All
Allow From 192.168.1.0/24
AuthType None
Allow from All
</Location>
<Location />
Order Deny,Allow
Deny From All
Allow From 192.168.1.0/24
</Location>
Browsing On
BrowseProtocols cups
BrowseOrder Deny,Allow
BrowseAllow from @LOCAL
BrowseAddress 255.255.255.255
Listen *:631
|
_________________
--Blake |
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Fri Jun 16, 2006 1:47 am Post subject: |
|
|
| blake121666 wrote: | | That *is* weird. But please do it ... it can't hurt. |
So after you set the raw output, the debug log is the EXACT same error?
How are you printing? From what app?
Edit: I think this | Code: | | application/octet-stream application/vnd.cups-raw |
should be this | Code: | | application/octet-stream application/vnd.cups-raw - |
You have to uncomment the raw type in /etc/cups/mime.types also. |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Fri Jun 16, 2006 2:59 pm Post subject: |
|
|
But...
I mean, should it not be reading all the avail mime types. I mean it looks like you are redirecting me to get the raw version printing, but that seems to be a work around.
Justace |
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Fri Jun 16, 2006 3:21 pm Post subject: |
|
|
| prophecy wrote: | But...
I mean, should it not be reading all the avail mime types. I mean it looks like you are redirecting me to get the raw version printing, but that seems to be a work around.
Justace |
Your dmesg output in your first post shows it is sending an application/octet-stream to cups and that is what it doesn't understand.
Edit: What app or command are you using to print? |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Fri Jun 16, 2006 3:58 pm Post subject: |
|
|
| Code: |
I [15/Jun/2006:09:38:51 -0500] Loaded MIME database from '/etc/cups': 1 types, 0 filters...
|
The above line is from the cupsd load process listed in /var/log/cups/error_log, not dmesg.
If cupsd can not find an entry for a print job then it defaults to the one it thinks. I have tried to print from many different places.
I am currently trying to print from kde 3.5.3 through the cups driver.
I mean, it should be loading more than one type of mime type at program startup. |
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Fri Jun 16, 2006 4:13 pm Post subject: |
|
|
| prophecy wrote: | | Code: |
I [15/Jun/2006:09:38:51 -0500] Loaded MIME database from '/etc/cups': 1 types, 0 filters...
|
The above line is from the cupsd load process listed in /var/log/cups/error_log, not dmesg.
If cupsd can not find an entry for a print job then it defaults to the one it thinks. I have tried to print from many different places.
I am currently trying to print from kde 3.5.3 through the cups driver.
I mean, it should be loading more than one type of mime type at program startup. |
I realize what you're saying, but I'm suggesting that we tackle 1 error at a time.
Let's start from the beginning, what is the output of: | Code: | | emerge foomatic foomatic-db foomatic-db-engine foomatic-filters -pv |
Did you setup the printer manually or using the KDE printer dialog? |
|
| Back to top |
|
|
prophecy
Tux's lil' helper
Joined: 17 Nov 2003
Posts: 97
|
| Posted: Fri Jun 16, 2006 4:22 pm Post subject: |
|
|
Ok...
Well, printers were setup previously though the kde print dialog. I am running ~x86 and gcc 4.1.1 with KDE 3.5.3.
| Code: |
prophecylaptop ~ # emerge foomatic foomatic-db foomatic-db-engine foomatic-filters -pv
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] net-print/foomatic-3.0.20060601 USE="foomaticdb ppds" 0 kB
[ebuild R ] net-print/foomatic-db-20060601 0 kB
[ebuild R ] net-print/foomatic-db-engine-3.0.20060601 USE="-minimal" 0 kB
[ebuild R ] net-print/foomatic-filters-3.0.20060601 USE="cups" 0 kB
Total size of downloads: 0 kB
|
/etc/cups/cupsd.conf
| Code: |
#
# "$Id: cupsd.conf.in 5454 2006-04-23 21:46:38Z mike $"
#
# Sample configuration file for the Common UNIX Printing System (CUPS)
# scheduler. See "man cupsd.conf" for a complete description of this
# file.
#
# Log general information in error_log - change "info" to "debug" for
# troubleshooting...
LogLevel debug
# Administrator user group...
SystemGroup lpadmin
# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow @LOCAL
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
</Location>
# Restrict access to the admin pages...
<Location /admin>
Encryption Required
Order allow,deny
Allow localhost
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an adminstrator...
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
# Require user @OWNER @SYSTEM
Order allow,deny
</Limit>
# All administration operations require an adminstrator to authenticate...
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
AuthType Basic
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order allow,deny
</Limit>
</Policy>
#
# End of "$Id: cupsd.conf.in 5454 2006-04-23 21:46:38Z mike $".
#
|
/etc/cups/mime.types
| Code: |
#
# "$Id: mime.types 5402 2006-04-14 19:21:03Z mike $"
#
# MIME types file for the Common UNIX Printing System (CUPS).
#
# Copyright 1997-2005 by Easy Software Products.
#
# These coded instructions, statements, and computer programs are the
# property of Easy Software Products and are protected by Federal
# copyright law. Distribution and use rights are outlined in the file
# "LICENSE.txt" which should have been included with this file. If this
# file is missing or damaged please contact Easy Software Products
# at:
#
# Attn: CUPS Licensing Information
# Easy Software Products
# 44141 Airport View Drive, Suite 204
# Hollywood, Maryland 20636 USA
#
# Voice: (301) 373-9600
# EMail: cups-info@cups.org
# WWW: http://www.cups.org
#
########################################################################
#
# Format of Lines:
#
# super/type rules
#
# "rules" can be any combination of:
#
# ( expr ) Parenthesis for expression grouping
# + Logical AND
# , or whitespace Logical OR
# ! Logical NOT
# match("pattern") Pattern match on filename
# extension Pattern match on "*.extension"
# ascii(offset,length) True if bytes are valid printable ASCII
# (CR, NL, TAB, BS, 32-126)
# printable(offset,length) True if bytes are printable 8-bit chars
# (CR, NL, TAB, BS, 32-126, 128-254)
# string(offset,"string") True if bytes are identical to string
# istring(offset,"string") True if bytes are identical to
# case-insensitive string
# char(offset,value) True if byte is identical
# short(offset,value) True if 16-bit integer is identical
# int(offset,value) True if 32-bit integer is identical
# locale("string") True if current locale matches string
# contains(offset,range,"string") True if the range contains the string
#
# General Notes:
#
# MIME type names are case-insensitive. Internally they are converted
# to lowercase. Multiple occurrences of a type will cause the provided
# rules to be appended to the existing definition. Type names are sorted
# in ascending order, so if two types use the same rules to resolve a type
# (e.g. doc extension for two types), the returned type will be the first
# type in the sorted list.
#
# The "printable" rule differs from the "ascii" rule in that it also
# accepts 8-bit characters in the range 128-255.
#
# String constants must be surrounded by "" if they contain whitespace.
# To insert binary data into a string, use the <hex> notation.
#
########################################################################
#
# Application-generated files...
#
#application/msword doc string(0,<D0CF11E0A1B11AE1>)
application/pdf pdf string(0,%PDF)
application/postscript ai eps ps string(0,%!) string(0,<04>%!) \
contains(0,128,<1B>%-12345X) + \
(contains(0,1024,"LANGUAGE=POSTSCRIPT") \
contains(0,1024,"LANGUAGE = Postscript") \
contains(0,1024,"LANGUAGE = PostScript") \
contains(0,1024,"LANGUAGE = POSTSCRIPT") \
(contains(0,1024,<0a>%!) + \
!contains(0,1024,"ENTER LANGUAGE")))
application/vnd.hp-HPGL hpgl string(0,<1B>&)\
string(0,<1B>E<1B>%0B) \
string(0,<1B>%-1B) string(0,<201B>)\
string(0,BP;) string(0,IN;) string(0,DF;) \
string(0,BPINPS;) \
(contains(0,128,<1B>%-12345X) + \
(contains(0,1024,"LANGUAGE=HPGL") \
contains(0,1024,"LANGUAGE = HPGL")))
########################################################################
#
# Image files...
#
image/gif gif string(0,GIF87a) string(0,GIF89a)
image/png png string(0,<89>PNG)
image/jpeg jpeg jpg jpe string(0,<FFD8FF>) &&\
(char(3,0xe0) char(3,0xe1) char(3,0xe2) char(3,0xe3)\
char(3,0xe4) char(3,0xe5) char(3,0xe6) char(3,0xe7)\
char(3,0xe8) char(3,0xe9) char(3,0xea) char(3,0xeb)\
char(3,0xec) char(3,0xed) char(3,0xee) char(3,0xef))
image/tiff tiff tif string(0,MM) string(0,II)
image/x-photocd pcd string(2048,PCD_IPI)
image/x-portable-anymap pnm
image/x-portable-bitmap pbm string(0,P1) string(0,P4)
image/x-portable-graymap pgm string(0,P2) string(0,P5)
image/x-portable-pixmap ppm string(0,P3) string(0,P6)
image/x-sgi-rgb rgb sgi bw icon short(0,474)
image/x-xbitmap xbm
image/x-xpixmap xpm ascii(0,1024) + string(3,"XPM")
#image/x-xwindowdump xwd string(4,<00000007>)
image/x-sun-raster ras string(0,<59a66a95>)
#image/fpx fpx
image/x-alias pix short(8,8) short(8,24)
image/x-bitmap bmp string(0,BM) && !printable(2,14)
image/x-icon ico
########################################################################
#
# Text files...
#
application/x-cshell csh printable(0,1024) + string(0,#!) +\
(contains(2,80,/csh) contains(2,80,/tcsh))
application/x-perl pl printable(0,1024) + string(0,#!) +\
contains(2,80,/perl)
application/x-shell sh printable(0,1024) + string(0,#!) +\
(contains(2,80,/bash) contains(2,80,/ksh)\
contains(2,80,/sh) contains(2,80,/zsh))
application/x-csource c cxx cpp cc C h hpp \
printable(0,1024) + \
(string(0,/*) string(0,//)
string(0,#include) contains(0,1024,<0a>#include) \
string(0,#define) contains(0,1024,<0a>#define))
text/html html htm printable(0,1024) +\
(istring(0,"<HTML>") istring(0,"<!DOCTYPE"))
text/plain txt printable(0,1024)
text/css css
########################################################################
#
# CUPS-specific types...
#
application/vnd.cups-command string(0,'#CUPS-COMMAND')
application/vnd.cups-form string(0,"<CUPSFORM>")
application/vnd.cups-pdf
application/vnd.cups-postscript
application/vnd.cups-ppd ppd string(0,"*PPD-Adobe:")
application/vnd.cups-raster string(0,"RaSt") string(0,"tSaR")
application/vnd.cups-raw (string(0,<1B>E) + !string(2,<1B>%0B)) \
string(0,<1B>@) \
(contains(0,128,<1B>%-12345X) + \
(contains(0,1024,"LANGUAGE=PCL") \
contains(0,1024,"LANGUAGE = PCL")))
########################################################################
#
# Raw print file support...
#
# Comment the following type to prevent raw file printing.
#
application/octet-stream
#
# End of "$Id: mime.types 5402 2006-04-14 19:21:03Z mike $".
#
|
/etc/cups/mime.convs
| Code: |
#
# "$Id: mime.convs 5402 2006-04-14 19:21:03Z mike $"
#
# MIME converts file for the Common UNIX Printing System (CUPS).
#
# Copyright 1997-2005 by Easy Software Products.
#
# These coded instructions, statements, and computer programs are the
# property of Easy Software Products and are protected by Federal
# copyright law. Distribution and use rights are outlined in the file
# "LICENSE.txt" which should have been included with this file. If this
# file is missing or damaged please contact Easy Software Products
# at:
#
# Attn: CUPS Licensing Information
# Easy Software Products
# 44141 Airport View Drive, Suite 204
# Hollywood, Maryland 20636 USA
#
# Voice: (301) 373-9600
# EMail: cups-info@cups.org
# WWW: http://www.cups.org
#
########################################################################
#
# Format of Lines:
#
# source/type destination/type cost filter
#
# General Notes:
#
# The "cost" field is used to find the least costly filters to run
# when converting a job file to a printable format.
#
# All filters *must* accept the standard command-line arguments
# (job-id, user, title, copies, options, [filename or stdin]) to
# work with CUPS.
#
########################################################################
#
# PostScript filters
#
application/pdf application/postscript 33 pdftops
application/postscript application/vnd.cups-postscript 66 pstops
application/vnd.hp-HPGL application/postscript 66 hpgltops
application/x-cshell application/postscript 33 texttops
application/x-csource application/postscript 33 texttops
application/x-perl application/postscript 33 texttops
application/x-shell application/postscript 33 texttops
text/plain application/postscript 33 texttops
text/html application/postscript 33 texttops
image/gif application/vnd.cups-postscript 66 imagetops
image/png application/vnd.cups-postscript 66 imagetops
image/jpeg application/vnd.cups-postscript 66 imagetops
image/tiff application/vnd.cups-postscript 66 imagetops
image/x-bitmap application/vnd.cups-postscript 66 imagetops
image/x-photocd application/vnd.cups-postscript 66 imagetops
image/x-portable-anymap application/vnd.cups-postscript 66 imagetops
image/x-portable-bitmap application/vnd.cups-postscript 66 imagetops
image/x-portable-graymap application/vnd.cups-postscript 66 imagetops
image/x-portable-pixmap application/vnd.cups-postscript 66 imagetops
image/x-sgi-rgb application/vnd.cups-postscript 66 imagetops
image/x-xbitmap application/vnd.cups-postscript 66 imagetops
image/x-xpixmap application/vnd.cups-postscript 66 imagetops
#image/x-xwindowdump application/vnd.cups-postscript 66 imagetops
image/x-sun-raster application/vnd.cups-postscript 66 imagetops
########################################################################
#
# Form filter...
#
# This filter does not currently exist, but the file format is defined
# in the IDD and registered with the IANA for future use...
#
#application/vnd.cups-form application/vnd.cups-postscript 33 formtops
########################################################################
#
# Raster filters...
#
image/gif application/vnd.cups-raster 100 imagetoraster
image/png application/vnd.cups-raster 100 imagetoraster
image/jpeg application/vnd.cups-raster 100 imagetoraster
image/tiff application/vnd.cups-raster 100 imagetoraster
image/x-bitmap application/vnd.cups-raster 100 imagetoraster
image/x-photocd application/vnd.cups-raster 100 imagetoraster
image/x-portable-anymap application/vnd.cups-raster 100 imagetoraster
image/x-portable-bitmap application/vnd.cups-raster 100 imagetoraster
image/x-portable-graymap application/vnd.cups-raster 100 imagetoraster
image/x-portable-pixmap application/vnd.cups-raster 100 imagetoraster
image/x-sgi-rgb application/vnd.cups-raster 100 imagetoraster
image/x-xbitmap application/vnd.cups-raster 100 imagetoraster
image/x-xpixmap application/vnd.cups-raster 100 imagetoraster
#image/x-xwindowdump application/vnd.cups-raster 100 imagetoraster
image/x-sun-raster application/vnd.cups-raster 100 imagetoraster
# pstoraster is now part of ESP Ghostscript...
#application/vnd.cups-postscript application/vnd.cups-raster 100 pstoraster
########################################################################
#
# Raw filter...
#
# Uncomment the following filter to allow printing of arbitrary files
# without the -oraw option.
#
application/octet-stream application/vnd.cups-raw 0 -
#
# End of "$Id: mime.convs 5402 2006-04-14 19:21:03Z mike $".
#
|
|
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Fri Jun 16, 2006 4:52 pm Post subject: |
|
|
Before jumping into this more, did you try using x86 rather than ~x86 versions of foomatic and I'm quessing maybe cups too?
What version of cups are you using?
Can you post your /etc/cups/printers.conf also? |
|
| Back to top |
|
|
dexxxter
n00b
Joined: 19 Jul 2006
Posts: 18
|
| Posted: Wed Jul 19, 2006 8:51 am Post subject: |
|
|
| Has anyone found solution to this problem? I have the same situation... |
|
| Back to top |
|
|
dexxxter
n00b
Joined: 19 Jul 2006
Posts: 18
|
| Posted: Fri Jul 21, 2006 12:28 pm Post subject: |
|
|
| Solved by copying /etc/cups/* from my collegue's bsd... trying to find where were the problem |
|
| Back to top |
|
|
roguetoad
Tux's lil' helper
Joined: 24 Oct 2005
Posts: 124
Location: Office chair
|
| Posted: Sat Jul 22, 2006 11:44 pm Post subject: |
|
|
Wading thru the logs I get more or less the same error.
This is driving me nuts!
| Code: |
D [22/Jul/2006:16:45:52 -0600] [Job 14] printer-uri = "ipp://192.168.1.106:631/printers/Local"
D [22/Jul/2006:16:45:52 -0600] [Job 14] requesting-user-name = "root"
D [22/Jul/2006:16:45:52 -0600] [Job 14] job-name = "Test Page"
E [22/Jul/2006:16:45:52 -0600] [Job 14] Print file was not accepted (Unsupported format 'application/octet-stream'!)!
E [22/Jul/2006:16:45:52 -0600] PID 25992 (/usr/libexec/cups/backend/ipp) stopped with status 1!
D [22/Jul/2006:16:45:52 -0600] [Job 14] File 0 is complete.
I [22/Jul/2006:16:45:52 -0600] [Job 14] Backend returned status 1 (failed)
D [22/Jul/2006:16:45:52 -0600] Discarding unused printer-state-changed event...
I [22/Jul/2006:16:45:52 -0600] Saving printers.conf...
D [22/Jul/2006:16:45:54 -0600] cupsdReadClient: 6 GET /jobs/ HTTP/1.1
|
I'm not much of a coder, but here is a post that seems relevant. Even links to a patch to fix it (for Debian)
[url]
http://www.cups.org/str.php?L1667
[/url] |
|
| Back to top |
|
|
roguetoad
Tux's lil' helper
Joined: 24 Oct 2005
Posts: 124
Location: Office chair
|
| Posted: Wed Jul 26, 2006 4:57 am Post subject: |
|
|
Hmm. cups-1.2.2 seems to have ipp working to the extent that it now finds the networked printer. However, it does not print pages correctly.
I get pages that output things like
-12345X@PJL ENTER LANGUAGE=PCL3GUI
at the top of the page and the rest is blank.
Any ideas on what this is? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
