Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
nvidia agp status disabled
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
compimatiker
n00b
n00b


Joined: 20 Jan 2006
Posts: 4

PostPosted: Mon Sep 04, 2006 5:07 pm    Post subject: nvidia agp status disabled Reply with quote

Hello out there,

Actually i'm trying to upgrade my stable system from kernel 2.6.15 to 2.6.17 and of course to the new nvidia-drivers.
After compilation was finished i rebooted with my new kernel, my system freezes imediately after startx. I checked the gentoo nvidia guide and my kernel config: my kernel should be configured properly.
After searching a while in this forum i found some threads. with similar probs. From there i got a advice to check agp stats with:
Code:
cat /proc/driver/nvidia/agp/status

Output was:
Code:
Status: Disabled


I tried to enable/disable kernel agpart to switch between NVagp and kernel agp but nvidia card is still disabled.
In bothe cases the nvidia module is loaded properly.

I own an nvidia GForce4 Go 32Mb within a toshiba laptop. So the card should be supported by this driver version.
My xorg.conf is absolutely simple, i didnt en/disable any extra nvidia options, just set the driver to nvidia

My latest working setup: kernel-2.6.15-r1 with nvidia-glx-1.07174-r5 and nvidia-kernel-1.0.7174-r3

Of course, i also could try to use the legacy drivers or just change back to old config, but i would know if there is a way to enable the card ;-)
I tried several nvidia drivers wit kernel-2.6.16xxx a month ago with same probs (freezing whole system immediately after startx) but at this time i didnt knew the cat command ;-), so i assume the status was disbaled there also. I really dont want to check several drivers again.

Thanks for any hints how to enable the status.

Edit: Meahnwhile i tested the cat ...agp/status on my other gentoo box. Agp gets enabled, if at least xdm is started, so unfortunately in console mode the agp status isnt a indicator for any probs :oops: .

Anyway do you have some tips what else i can do to get a later driver working? I would like to test if performance under xgl is better with the latest drivers.
Back to top
View user's profile Send private message
evoweiss
Veteran
Veteran


Joined: 07 Sep 2003
Posts: 1678
Location: Edinburgh, UK

PostPosted: Mon Sep 04, 2006 11:59 pm    Post subject: Re: nvidia agp status disabled Reply with quote

Hi,

Have you tried the following? This is what I used and it worked like a charm.

Best,

Alex
Back to top
View user's profile Send private message
compimatiker
n00b
n00b


Joined: 20 Jan 2006
Posts: 4

PostPosted: Tue Sep 05, 2006 6:36 am    Post subject: Reply with quote

No i havent yet, thought it was a bit of hacking and :wink: . So i decided to start this after the card works.

But i will give it a try :).

Thx alot.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum