| View previous topic :: View next topic |
| Author |
Message |
Drognar
n00b
Joined: 16 Sep 2006
Posts: 5
|
 Posted: Sat Sep 16, 2006 2:38 pm Post subject: Core2 system running at half speed? |
 |
|
Hi
I have just installed a new machine off the 2006.1 amd64 live dvd. It is an Intel Core2 Duo system.
| Code: |
cat /etc/make.conf
CFLAGS="-O2 -pipe -march=nocona"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j3"
SYNC="rsync://192.168.20.2/gentoo-portage"
#SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="-nls -doc -python -gpm -tcpd -berkdb minimal"
GENTOO_MIRRORS="ftp://ftp.is.co.za/linux/distributions/gentoo http://distfiles.gentoo.org/"
VIDEO_CARDS="" |
My CPU seems to run both cores at half speed, though. I have tried both gentoo-sources-2.6.17-r8 and vanilla-sources-2.6.17.13
| Code: | cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 931.017
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 1864.08
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 931.017
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 1862.15
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
|
I have also tried with and without cpufreq support in the kernel.
My current kernel .config looks like (with commented options removed)
| Code: | cat /usr/src/linux/.config | sed '/^#/d; /^$/d'
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-tan-4"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_LBD=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_X86_PC=y
CONFIG_MPSC=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_DISCONTIGMEM_MANUAL=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_PM=y
CONFIG_SUSPEND_SMP=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_BINFMT_ELF=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_NV=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_INTEL_COMBINED=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_RAID6=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_PCI=y
CONFIG_E100=m
CONFIG_8139TOO=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_WATCHDOG=y
CONFIG_SOFT_WATCHDOG=y
CONFIG_HW_RANDOM=y
CONFIG_RTC=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISA=m
CONFIG_SENSORS_EEPROM=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_MON=y
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_FS_POSIX_ACL=y
CONFIG_DNOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_FS=y
CONFIG_CRC32=y
|
Does anyone have any ideas on where to look to fix this?
 |
|
| Back to top |
|
 |
CrimsonMirage
n00b
Joined: 08 Feb 2006
Posts: 14
Location: Indianapolis, IN
|
| Posted: Sat Sep 16, 2006 6:55 pm Post subject: Re: Core2 system running at half speed? |
|
|
| Drognar wrote: | | My CPU seems to run both cores at half speed, though. |
Could you clarify this statement? A quick glance at what you've posted doesn't lead me to believe any settings are wrong, but why do both cores "seem to run at half speed?" |
|
| Back to top |
|
|
brot
Guru
Joined: 06 Apr 2004
Posts: 322
|
| Posted: Sat Sep 16, 2006 8:06 pm Post subject: |
|
|
| Also, try to see at what temp your cpu is. Maybe it is getting too hot. |
|
| Back to top |
|
|
DieselPower
Apprentice
Joined: 26 Oct 2005
Posts: 216
Location: TN
|
| Posted: Sun Sep 17, 2006 1:17 am Post subject: |
|
|
Something is wrong. My athlon system beats that to friggin pieces! For the price you paid you should get twice what I am. My whole system cost $397
[/quote] | Code: |
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 43
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 1
cpu MHz : 2010.466
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips : 4025.14
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 43
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 1
cpu MHz : 2010.466
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips : 4020.96
|
_________________
I have it my way no matter what, and I build it every time, 'cause they don't sell them that way. A genius is always has what he wants, but a rich person does not. I'm a rich kid with no money! That's why I chose Gentoo... |
|
| Back to top |
|
|
Drognar
n00b
Joined: 16 Sep 2006
Posts: 5
|
| Posted: Sun Sep 17, 2006 7:29 am Post subject: Re: Core2 system running at half speed? |
|
|
| CrimsonMirage wrote: | | Drognar wrote: | | My CPU seems to run both cores at half speed, though. |
Could you clarify this statement? A quick glance at what you've posted doesn't lead me to believe any settings are wrong, but why do both cores "seem to run at half speed?" |
Each core's MHz is too low as follows:
| Quote: |
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 931.017 |
| Brot wrote: |
Also, try to see at what temp your cpu is. Maybe it is getting too hot.
|
The temps are fine - running around 45 or so, when checking in the bios immediately after doing cpu intensive compiles |
|
| Back to top |
|
|
hilbert_space
n00b
Joined: 26 Jun 2006
Posts: 34
Location: 50°8'11" N 8°17'41" E
|
| Posted: Sun Sep 17, 2006 9:46 am Post subject: |
|
|
Try to change the cpufreq with programs like sys-power/cpufrequtils in the portage. cpufreq support in the kernel is necessary for doing this.
Try this (and change 2GHz to your freq):
| Code: | emerge -av cpufrequtils
cpufreq-set -c 0 -f 2GHz
cpufreq-set -c 1 -f 2GHz
cpufreq-info |
There are two cpufreqset-commands for the each cpu, you have to try if they are necessary (I have a dual-core 1 laptop and at my system they are) |
|
| Back to top |
|
|
Drognar
n00b
Joined: 16 Sep 2006
Posts: 5
|
| Posted: Sun Sep 17, 2006 10:19 am Post subject: |
|
|
It looks like my acpi data in the motherboard is wrong and/or the CPU is not supported by the speedstep kernel code.
I can't use the speedstep_centrino module, and when I use the acpi-cpufreq module, my CPUs are slowed down to 700MHz maximum.
| hilbert_space wrote: | Try to change the cpufreq with programs like sys-power/cpufrequtils in the portage. cpufreq support in the kernel is necessary for doing this.
Try this (and change 2GHz to your freq):
| Code: | emerge -av cpufrequtils
cpufreq-set -c 0 -f 2GHz
cpufreq-set -c 1 -f 2GHz
cpufreq-info |
There are two cpufreqset-commands for the each cpu, you have to try if they are necessary (I have a dual-core 1 laptop and at my system they are) |
| Code: |
vmserv ~ # modprobe speedstep-centrino
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.17-gentoo-r8-tan-5/kernel/arch/x86_64/kernel/cpufreq/speedstep-centrino.ko): No such device
vmserv ~ #
Sep 17 12:13:45 vmserv cpufreq-core: trying to register driver centrino
Sep 17 12:13:45 vmserv cpufreq-core: adding CPU 0
Sep 17 12:13:45 vmserv speedstep-centrino: Invalid control/status registers (1 - 1)
Sep 17 12:13:45 vmserv speedstep-centrino: <6>speedstep-centrino: invalid ACPI data
Sep 17 12:13:45 vmserv speedstep-centrino: <6>speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cpuinfo to Jeremy Fitzhardinge <jeremy@goop.org>
Sep 17 12:13:45 vmserv cpufreq-core: initialization failed
Sep 17 12:13:45 vmserv cpufreq-core: adding CPU 1
Sep 17 12:13:45 vmserv speedstep-centrino: Invalid control/status registers (1 - 1)
Sep 17 12:13:45 vmserv speedstep-centrino: <6>speedstep-centrino: invalid ACPI data
Sep 17 12:13:45 vmserv cpufreq-core: initialization failed
Sep 17 12:13:45 vmserv cpufreq-core: no CPU initialized for driver centrino
Sep 17 12:13:45 vmserv cpufreq-core: unregistering CPU 0
Sep 17 12:13:45 vmserv cpufreq-core: unregistering CPU 1
|
| Code: |
vmserv ~ # modprobe acpi-cpufreq
vmserv ~ #
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_init
Sep 17 12:15:00 vmserv cpufreq-core: trying to register driver acpi-cpufreq
Sep 17 12:15:00 vmserv cpufreq-core: adding CPU 0
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_cpu_init
Sep 17 12:15:00 vmserv freq-table: table entry 0: 700000 kHz, 0 index
Sep 17 12:15:00 vmserv freq-table: table entry 1: 600000 kHz, 1 index
Sep 17 12:15:00 vmserv acpi-cpufreq: CPU0 - ACPI performance management activated.
Sep 17 12:15:00 vmserv acpi-cpufreq: *P0: 700 MHz, 22464 mW, 160 uS
Sep 17 12:15:00 vmserv acpi-cpufreq: P1: 600 MHz, 22464 mW, 160 uS
Sep 17 12:15:00 vmserv freq-table: setting show_table for cpu 0 to ffff81007f0e02e0
Sep 17 12:15:00 vmserv cpufreq-core: setting new policy for CPU 0: 600000 - 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_verify
Sep 17 12:15:00 vmserv freq-table: request for verification of policy (600000 - 700000 kHz) for cpu 0
Sep 17 12:15:00 vmserv freq-table: verification lead to (600000 - 700000 kHz) for cpu 0
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_verify
Sep 17 12:15:00 vmserv freq-table: request for verification of policy (600000 - 700000 kHz) for cpu 0
Sep 17 12:15:00 vmserv freq-table: verification lead to (600000 - 700000 kHz) for cpu 0
Sep 17 12:15:00 vmserv cpufreq-core: new min and max freqs are 600000 - 700000 kHz
Sep 17 12:15:00 vmserv cpufreq-core: governor switch
Sep 17 12:15:00 vmserv cpufreq-core: __cpufreq_governor for CPU 0, event 1
Sep 17 12:15:00 vmserv performance: setting to 700000 kHz because of event 1
Sep 17 12:15:00 vmserv cpufreq-core: target for CPU 0: 700000 kHz, relation 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_setpolicy
Sep 17 12:15:00 vmserv freq-table: request for target 700000 kHz (relation: 1) for cpu 0
Sep 17 12:15:00 vmserv freq-table: target is 0 (700000 kHz, 0)
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_processor_set_performance
Sep 17 12:15:00 vmserv acpi-cpufreq: Called after resume, resetting to P0
Sep 17 12:15:00 vmserv acpi-cpufreq: Transitioning from P0 to P0
Sep 17 12:15:00 vmserv cpufreq-core: notification 0 of frequency transition to 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: Writing 0x00000036 to port 0x0880
Sep 17 12:15:00 vmserv cpufreq-core: notification 1 of frequency transition to 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: Transition successful after 0 microseconds
Sep 17 12:15:00 vmserv cpufreq-core: governor: change or update limits
Sep 17 12:15:00 vmserv cpufreq-core: __cpufreq_governor for CPU 0, event 3
Sep 17 12:15:00 vmserv performance: setting to 700000 kHz because of event 3
Sep 17 12:15:00 vmserv cpufreq-core: target for CPU 0: 700000 kHz, relation 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_setpolicy
Sep 17 12:15:00 vmserv freq-table: request for target 700000 kHz (relation: 1) for cpu 0
Sep 17 12:15:00 vmserv freq-table: target is 0 (700000 kHz, 0)
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_processor_set_performance
Sep 17 12:15:00 vmserv acpi-cpufreq: Already at target state (P0)
Sep 17 12:15:00 vmserv cpufreq-core: initialization complete
Sep 17 12:15:00 vmserv cpufreq-core: adding CPU 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_cpu_init
Sep 17 12:15:00 vmserv freq-table: table entry 0: 700000 kHz, 0 index
Sep 17 12:15:00 vmserv freq-table: table entry 1: 600000 kHz, 1 index
Sep 17 12:15:00 vmserv acpi-cpufreq: CPU1 - ACPI performance management activated.
Sep 17 12:15:00 vmserv acpi-cpufreq: *P0: 700 MHz, 22464 mW, 160 uS
Sep 17 12:15:00 vmserv acpi-cpufreq: P1: 600 MHz, 22464 mW, 160 uS
Sep 17 12:15:00 vmserv freq-table: setting show_table for cpu 1 to ffff81007e08ed20
Sep 17 12:15:00 vmserv cpufreq-core: setting new policy for CPU 1: 600000 - 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_verify
Sep 17 12:15:00 vmserv freq-table: request for verification of policy (600000 - 700000 kHz) for cpu 1
Sep 17 12:15:00 vmserv freq-table: verification lead to (600000 - 700000 kHz) for cpu 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_verify
Sep 17 12:15:00 vmserv freq-table: request for verification of policy (600000 - 700000 kHz) for cpu 1
Sep 17 12:15:00 vmserv freq-table: verification lead to (600000 - 700000 kHz) for cpu 1
Sep 17 12:15:00 vmserv cpufreq-core: new min and max freqs are 600000 - 700000 kHz
Sep 17 12:15:00 vmserv cpufreq-core: governor switch
Sep 17 12:15:00 vmserv cpufreq-core: __cpufreq_governor for CPU 1, event 1
Sep 17 12:15:00 vmserv performance: setting to 700000 kHz because of event 1
Sep 17 12:15:00 vmserv cpufreq-core: target for CPU 1: 700000 kHz, relation 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_setpolicy
Sep 17 12:15:00 vmserv freq-table: request for target 700000 kHz (relation: 1) for cpu 1
Sep 17 12:15:00 vmserv freq-table: target is 0 (700000 kHz, 0)
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_processor_set_performance
Sep 17 12:15:00 vmserv acpi-cpufreq: Called after resume, resetting to P0
Sep 17 12:15:00 vmserv acpi-cpufreq: Transitioning from P0 to P0
Sep 17 12:15:00 vmserv cpufreq-core: notification 0 of frequency transition to 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: Writing 0x00000036 to port 0x0880
Sep 17 12:15:00 vmserv cpufreq-core: notification 1 of frequency transition to 700000 kHz
Sep 17 12:15:00 vmserv acpi-cpufreq: Transition successful after 0 microseconds
Sep 17 12:15:00 vmserv cpufreq-core: governor: change or update limits
Sep 17 12:15:00 vmserv cpufreq-core: __cpufreq_governor for CPU 1, event 3
Sep 17 12:15:00 vmserv performance: setting to 700000 kHz because of event 3
Sep 17 12:15:00 vmserv cpufreq-core: target for CPU 1: 700000 kHz, relation 1
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_cpufreq_setpolicy
Sep 17 12:15:00 vmserv freq-table: request for target 700000 kHz (relation: 1) for cpu 1
Sep 17 12:15:00 vmserv freq-table: target is 0 (700000 kHz, 0)
Sep 17 12:15:00 vmserv acpi-cpufreq: acpi_processor_set_performance
Sep 17 12:15:00 vmserv acpi-cpufreq: Already at target state (P0)
Sep 17 12:15:00 vmserv cpufreq-core: initialization complete
Sep 17 12:15:00 vmserv cpufreq-core: driver acpi-cpufreq up and running
|
| Code: |
vmserv ~ # cpufreq-set -c 0 -f 1.86G
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
vmserv ~ #
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
