| View previous topic :: View next topic |
| Author |
Message |
dylon
Guru
Joined: 21 Mar 2005
Posts: 331
Location: Gliwice
|
 Posted: Sun Sep 17, 2006 10:02 pm Post subject: MSI FX5200 vt128 (nvidia fx5200 personal cinema) |
 |
|
Witam.
Nie potrafie zmusic tunera z tej karty do dzialania 
Jak sie juz doczytalem, tuner oparty jest na saa7174.
W kernelu (2.6.17-gentoo-r wsparcia do niego nie ma (chyba ze ktos ma jakiegos patcha?)
lspci pokazuje mi tylko gf fx5200.
Sama karta ladnie pracuje na sterownikach binarnych nvidii i moze przez nie da sie jakos sterowac tunerem?
KdeTV w menu video pokazuje "XVideo: NVIDIA Video Interface Port (port 278)", ale nic nie dziala
Drugi problem to pilot radiowy na usb.
lsusb mowi:
| Code: | | Bus 001 Device 002: ID 0bc7:0005 X10 Wireless Technology, Inc. |
i jedyne co znalazlem do obslugi to:
| Code: | * app-misc/mouseremote
Available versions: 0.90
Installed: 0.90
Homepage: http://www4.pair.com/gribnif/ha/
Description: X10 MouseRemote
|
ale jakos nie potrafie zmusic tego do wspolpracy
Moze ktos z Was juz poradzil sobie z ta karta?
Pozdrawiam
_________________
Maciej Dylski |
|
| Back to top |
|
 |
Gabrys
Veteran
Joined: 05 Dec 2005
Posts: 1096
Location: Toruń [PL]
|
| Posted: Mon Sep 18, 2006 11:28 am Post subject: Re: MSI FX5200 vt128 (nvidia fx5200 personal cinema) |
|
|
| dylon wrote: | Drugi problem to pilot radiowy na usb.
lsusb mowi:
| Code: | | Bus 001 Device 002: ID 0bc7:0005 X10 Wireless Technology, Inc. |
i jedyne co znalazlem do obslugi to:
| Code: | * app-misc/mouseremote
Available versions: 0.90
Installed: 0.90
Homepage: http://www4.pair.com/gribnif/ha/
Description: X10 MouseRemote
|
ale jakos nie potrafie zmusic tego do wspolpracy
Moze ktos z Was juz poradzil sobie z ta karta?
Pozdrawiam |
Sprawdź na stronach www.lirc.org czy obsługują ten (podobny) model. Jeśli tak, zorientuj się (przez emerge -pv lirc) jaką opcję dodać do LIRC_DEVICES w /etc/make.conf i zaemerge'uj lirca.
_________________
Sabayon Professional 1.1 (czyli zdradziłem oryginalne Gentoo)
@ Dell Inspiron 8600 (nVidia, Realtek, Pentium M) |
|
| Back to top |
|
|
dylon
Guru
Joined: 21 Mar 2005
Posts: 331
Location: Gliwice
|
| Posted: Mon Sep 18, 2006 11:36 am Post subject: Re: MSI FX5200 vt128 (nvidia fx5200 personal cinema) |
|
|
| Quote: | | Sprawdź na stronach www.lirc.org czy obsługują ten (podobny) model. Jeśli tak, zorientuj się (przez emerge -pv lirc) jaką opcję dodać do LIRC_DEVICES w /etc/make.conf i zaemerge'uj lirca. |
Dzieki.
Na wstepie odrzucilem lirc-a bo jak wyczytalem obsluguje niby tylko irde 
Po Twojej radzie doszukalem sie na jego stronie ze obsluguje "nvidiowego" pilota (co prawda w LIRC_DEVICES wprost tego nie ma ale moze sie uda) - wieczorem bede sie tym bawil
Pozdrawiam
_________________
Maciej Dylski |
|
| Back to top |
|
|
dylon
Guru
Joined: 21 Mar 2005
Posts: 331
Location: Gliwice
|
| Posted: Wed Sep 20, 2006 8:40 am Post subject: |
|
|
Witam.
ad1. doszukalem sie sterownikow rivatv. Co prawda na stronie projektu jest info ze personal cinema jest jeszcze nie wspierana ale doszukalem sie ze kilka osob odpalilo ten tuner na rivatv.
Mam problemik:
| Code: | >>> Compiling source in /var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6 ...
/usr/bin/confcache --confcache-ignore /var/tmp/ccache:/var/tmp/.distcc --confcache-dir /var/tmp/confcache ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --build=i686-pc-linux-gnu
no cache
Checking for configured kernel headers... found [/lib/modules/2.6.17-gentoo-r8-dylon/build]
Checking for linux kernel >= 2.4.0... yes [2.6.17-gentoo-r8-dylon]
Using bttv sources in... bttv-2.6
Checking for kernel build system... found
Checking for kernel configuration... found
Checking for CONFIG_MODVERSIONS... yes
Checking for CONFIG_PCI... yes [y]
Checking for CONFIG_VIDEO_DEV... yes [y]
Checking for CONFIG_PROC_FS... yes [y]
Checking for CONFIG_I2C... yes [y]
Checking for CONFIG_I2C_ALGOBIT... yes [m]
Checking for CONFIG_MODULES... yes [y]
Checking for kernel dependencies... not needed for 2.6.x kernels
Checking for RedHat or Mandrake kernel... no
Checking whether AGP code should be included... no
Checking whether software conversion code should be included... no
Checking whether assembler code is enabled... yes
Creating Makefile... done
Checking your current setup for incompatibilities...
Checking for /proc... yes
Checking for kernel gcc... 4.1.1
Checking for write access to /lib/modules/2.6.17-gentoo-r8-dylon/build... yes
Checking for framebuffer... vesafb
Checking for SMP... no
No problems found.
To build RivaTV type `make'. For cleaning up type `make clean`.
* Preparing tuner module
make[1]: Entering directory `/usr/src/linux-2.6.17-gentoo-r8'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
CC [M] /var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.o
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:42: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:43: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:44: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:45: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:46: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1036: error: expected ')' before string constant
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1253: error: unknown field 'owner' specified in initializer
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1253: warning: initialization makes integer from pointer without a cast
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1255: error: unknown field 'name' specified in initializer
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1255: warning: initialization makes integer from pointer without a cast
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1257: error: unknown field 'flags' specified in initializer
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1257: error: 'I2C_DF_NOTIFY' undeclared here (not in a function)
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.c:1265: error: 'I2C_CLIENT_ALLOW_USE' undeclared here (not in a function)
make[2]: *** [/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv/tuner.o] Error 1
make[1]: *** [_module_/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/bttv] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.17-gentoo-r8'
make: [all-kbuild] Error 2 (ignored)
make[1]: Entering directory `/usr/src/linux-2.6.17-gentoo-r8'
make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
CC [M] /var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.o
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.c:232:5: warning: "EVER_IMPLEMENTED" is not defined
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.c:521:5: warning: "V4L_APPS_CARE_CORRECTLY" is not defined
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.c:882:5: warning: "EVER_IMPLEMENTED" is not defined
In file included from /var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv.h:10,
from /var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.c:32:
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-kcompat.h: In function 'kcompat_i2c_client_get':
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-kcompat.h:146: error: 'struct i2c_driver' has no member named 'owner'
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-kcompat.h: In function 'kcompat_i2c_client_put':
/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-kcompat.h:157: error: 'struct i2c_driver' has no member named 'owner'
make[2]: *** [/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src/rivatv-driver.o] Error 1
make[1]: *** [_module_/var/tmp/portage/rivatv-0.8.6-r1/work/rivatv-0.8.6/src] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.17-gentoo-r8'
make: *** [all-kbuild] Error 2
!!! ERROR: media-tv/rivatv-0.8.6-r1 failed.
Call stack:
ebuild.sh, line 1546: Called dyn_compile
ebuild.sh, line 937: Called src_compile
rivatv-0.8.6-r1.ebuild, line 46: Called linux-mod_src_compile
linux-mod.eclass, line 469: Called die
!!! Unable to make KSRC=//usr/src/linux KVERS=26 all.
!!! If you need support, post the topmost build error, and the call stack if relevant.
|
Podobno w gentoo-sources jest jakis blad ktory to powoduje (wyczytalem to na jakims forum z tym ze to bylo dla kernela serii 2.4).
Chyba ze ktos podejrzewa co moze wywalac kompilacje?
ad2. Pilot z zestawu personal cinema jest identyczny z pilotem z ati AiW. Odpalilem go przy pomocy lirca (moduly lirc_dev i lirc_atibusb). mode2 pokazuje mi kody naciskanych klawiszy ale ogolnie pilot dalej nie dziala.
Ze strony lirca sciagnalem lircd.conf dla tego pilota ale w nim sa inne kody niz te ktore pokazuje mode2, wiec pozniej w lircd.conf wrzucilem kody z mode2 ale dalej nic
Ma ktos jeszcze jakis pomysl jak tego pilota zmusic do dzialania?
Pozdrawiam
_________________
Maciej Dylski |
|
| Back to top |
|
|
Gabrys
Veteran
Joined: 05 Dec 2005
Posts: 1096
Location: Toruń [PL]
|
| Posted: Thu Sep 21, 2006 2:12 pm Post subject: |
|
|
Jak mode2 działa, to już powinno być OK, pewnie kwestia konfiguracji, no i odpalenia irexec of'koz
_________________
Sabayon Professional 1.1 (czyli zdradziłem oryginalne Gentoo)
@ Dell Inspiron 8600 (nVidia, Realtek, Pentium M) |
|
| Back to top |
|
|
|
Polskie forum (Polish) 
