| View previous topic :: View next topic |
| Author |
Message |
juangamnik
n00b
Joined: 10 May 2005
Posts: 17
|
 Posted: Thu Jul 20, 2006 4:51 pm Post subject: intel core duo Notebook and suspend2 problem |
 |
|
hi,
I have installed the suspend2-sources 2.6.17 on a MSI S262 with a intel core duo T2500. I had to patch the kernel for the r1000 realtek gigabit ethernet adapter and for the ipw3945 wireless lan adapter. I use vesafb and i810 for the graphics (intel 950GM).
Suspending sometimes works but most of the time it doesn't. Sometimes it "hangs" before shutting down/suspend-to-ram and I can go back to X with STRG+ALT+F7. But when I start top one processor is away and on tty12 is a message like cpu 1 sleeps now... but nothing about cpu0. After that the laptop does not shutdown anymore (I have to kill it with the power button). Short time ago I installed another ram.conf (I post it at the bottom of the entry) and it seemed to work, but then it doesn't resume anymore.
I tried a lot of things but don't know what to do now :'(. Once I got a kernel error, when trying to suspend-to-disk (Swapwriter), but I couldn't copy it. But that was with another kernel version. In my dmesg output there is a bug with my r1000. I had to erase a code line in the driver because the module parameter was expected to be an int but was a string,... perhaps it has something to do with that?
Does suspending work on any dual core mobile intel processor or especially on the MSI S262? Please tell me your workaround.
ram.conf:
| Code: | # Example ram.conf file for suspending to RAM. Adapt to your own tastes.
# Options are not case sensitive.
#
# Run "hibernate -h" for help on the configuration items.
### sysfs_power_state
UseSysfsPowerState mem
##############################################################################
### Some global settings
##############################################################################
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution gentoo
# XDisplay :0
##############################################################################
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
##############################################################################
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
UnmountFSTypes smbfs nfs vfat ntfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
### hardware_tweaks
# IbmAcpi yes
# RadeonTool yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
# LockConsoleAs root
# LockXScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
#OnSuspend 10 sudo /sbin/ifconfig eth0
#OnSuspend 10 sudo /sbin/ifconfig eth1
#OnSuspend 15 umount /media/data01
#OnSuspend 15 umount /media/win
#OnSuspend 09 sudo /etc/init.d/local stop
OnSuspend 10 sudo /etc/init.d/acpid stop
#OnSuspend 15 sudo killall dhcpcd
OnSuspend 20 echo "Good night!"
#OnResume 10 /sbin/modprobe ipw2200
#OnResume 10 sudo /sbin/dhcpcd eth0
#OnResume 15 mount /media/data01
#OnResume 15 mount /media/win
#OnResume 10 sudo /etc/init.d/local start
OnResume 10 sudo /etc/init.d/acpid start
OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### pcmcia
# EjectCards yes
### programs
IncompatiblePrograms xmms
### services
# RestartServices postfix
# StopServices alsasound
# StartServices aumix
RestartServices alsasound hotplug coldplug cpufreqd cpufrequtils laptop_mode
### vbetool
EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
### xstatus
## This can be set to gnome, kde or x:
XStatus kde
XSuspendText Preparing to suspend...
XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font -misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-* --colour=Green --shadow 1 --pos bottom --align center --offset 50 |
kde:
| Code: | * kde-base/kde-meta
Available versions: 3.4.3 3.5.2 ~3.5.3
Installed: 3.5.2
Homepage: http://www.kde.org/
Description: kde - merge this to pull in all kde packages
|
X:
| Code: | * x11-base/xorg-server
Available versions: 1.0.2-r6 1.0.2-r7 1.1.0-r1
Installed: 1.1.1
Homepage: http://xorg.freedesktop.org/
Description: X.Org X servers
* x11-base/xorg-x11
Available versions: 6.8.2-r7 6.8.2-r8 [M]6.9.0-r3 7.0-r1 7.1
Installed: 7.1
Homepage: http://xorg.freedesktop.org
Description: An X11 implementation maintained by the X.Org Foundation (meta package)
|
emerge --info:
| Code: | Portage 2.1.1_pre3-r1 (default-linux/x86/2006.0, gcc-3.4.6, glibc-2.3.6-r4, 2.6.17-suspend2 i686)
=================================================================
System uname: 2.6.17-suspend2 i686 Genuine Intel(R) CPU T2500 @ 2.00GHz
Gentoo Base System version 1.6.15
app-admin/eselect-compiler: [Not Present]
dev-lang/python: 2.4.3-r1
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: [Not Present]
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
sys-devel/binutils: 2.16.1-r3
sys-devel/gcc-config: 1.3.13-r3
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LINGUAS="de"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dfx X acpi alsa apache2 apm arts avi berkdb bitmap-fonts browserplugin cli crypt cups dbus directfb dlloader doc dri dts dvb dvd emboss encode examples fbsplash ffmpeg firefox foomaticdb gdbm gif gliee-v3 glitz gnutls gpm gtk gtk2 hal httpd imlib iptables isdnlog java jpeg jpeg2k kde kdeenablefinal kdehiddenvisibility libg++ libwww lm_sensors mad mikmod mmx motif mozilla mp3 mpeg ncurses nls nptl nptlonly nsplugin ntp ogg opengl oss pam pcre pdflib perl png pppd python qt qt3 qt4 quicktime rdesktop readline reflection samba screen sdl sensord session skins smartcard spell spl sse ssl stream svg svga tcpd threads tiff truetype truetype-fonts type1-fonts udev unicode urandom vcd visualization vorbis wifi win32codecs wxwidgets wxwindows x11 x86 xine xinerama xml xmms xorg xscreensaver xv zlib elibc_glibc input_devices_keyboard input_devices_mouse kernel_linux linguas_de userland_GNU video_cards_i810 video_cards_vesa"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
|
lsmod:
| Code: | Module Size Used by
sha256 10240 0
aes 30016 2
i915 18048 2
drm 64404 3 i915
iptable_nat 8196 0
ip_nat 16940 1 iptable_nat
iptable_mangle 3712 0
xt_state 3200 1
ip_conntrack 45280 3 iptable_nat,ip_nat,xt_state
xt_tcpudp 4096 3
iptable_filter 3840 1
ip_tables 14324 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 14468 4 iptable_nat,xt_state,xt_tcpudp,ip_tables
rfcomm 37652 0
snd_seq_dummy 4740 0
snd_seq_oss 31232 0
snd_seq_midi_event 7936 1 snd_seq_oss
snd_seq 49232 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8844 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39584 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_hda_intel 19220 5
snd_hda_codec 130736 1 snd_hda_intel
snd_pcm 80516 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 23428 3 snd_seq,snd_pcm
snd 51044 17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 10760 2 snd_hda_intel,snd_pcm
rtc 9876 0
dm_crypt 12168 1
hidp 17408 0
l2cap 23936 6 rfcomm,hidp
bluetooth 45668 5 rfcomm,hidp,l2cap
tun 11520 1
r1000 17152 0
ipw3945 110240 1
firmware_class 10752 1 ipw3945
ieee80211 31304 1 ipw3945
ieee80211_crypt 7040 1 ieee80211
dm_mirror 21328 0
dm_mod 55064 3 dm_crypt,dm_mirror
sata_mv 18696 0
ata_piix 12548 0
ahci 16644 0
sata_qstor 10372 0
sata_vsc 9220 0
sata_uli 8452 0
sata_sis 8836 0
sata_sx4 14212 0
sata_nv 10756 0
sata_via 9348 0
sata_svw 8580 0
sata_sil 10504 0
sata_promise 12548 0
libata 66188 13 sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil,sata_promise
sbp2 22664 0
ohci1394 32560 0
ieee1394 92088 2 sbp2,ohci1394
sl811_hcd 13184 0
ohci_hcd 20100 0
uhci_hcd 22284 0
usb_storage 68160 0
usbhid 46944 0
ehci_hcd 28552 0
usbcore 116992 7 sl811_hcd,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd
|
dmesg:
| Code: | Linux version 2.6.17-suspend2 (root@joclient) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Sat Jul 15 07:01:39 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30672 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 MSI ) @ 0x000f88d0
ACPI: RSDT (v001 MSI 1057 0x06212006 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 MSI 1057 0x06212006 MSFT 0x00000097) @ 0x3f7d0200
ACPI: MADT (v001 MSI OEMAPIC 0x06212006 MSFT 0x00000097) @ 0x3f7d0390
ACPI: MCFG (v001 MSI OEMMCFG 0x06212006 MSFT 0x00000097) @ 0x3f7d03f0
ACPI: OEMB (v001 MSI AMI_OEM 0x06212006 MSFT 0x00000097) @ 0x3f7de040
ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ 0x3f7d49b0
ACPI: DSDT (v001 MSI 1057 0x06212006 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 real_root=/dev/hda3 resume2=swap:/dev/hda2 init=/linuxrc splash=silent vga=0x360
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c04c4000 soft=c04bc000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2000.561 MHz processor.
Using pmtmr for high-res timesource
Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024176k/1040192k available (2651k kernel code, 15196k reserved, 912k data, 212k init, 122688k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4004.97 BogoMIPS (lpj=8009941)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c04c5000 soft=c04bd000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.63 BogoMIPS (lpj=8001278)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
Total of 2 processors activated (8005.60 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 1986k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: fe100000-fe8fffff
PREFETCH window: bdf00000-bfefffff
PCI: Bridge: 0000:00:1c.1
IO window: c000-cfff
MEM window: fe000000-fe0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: fd600000-fdefffff
PREFETCH window: bbf00000-bdefffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1153401057.908:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
vesafb: framebuffer at 0xd0000000, mapped to 0xf8a00000, using 2000k, total 7872k
vesafb: mode is 1280x800x8, linelength=1280, pages=6
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (54 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM chipsets
intelfb: Version 0.9.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: FUJITSU MHV2100AH, ATA DISK drive
hdb: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
Netfilter messages via NETLINK v0.30.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
ACPI wakeup devices:
P0PC USB0 USB1 USB2 USB3 EUSB MC97 P0P7 P0P8 P0P9 P0P1 OZF1 OZF2 OZF3 P0P5 P0P4 P0P3 AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 212k freed
Suspend2 2.2.7.3: Swapwriter: Signature found.
Suspend2 2.2.7.3: Resuming enabled.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfeb3fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-2: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
input: HID 1241:1155 as /class/input/input1
input: USB HID v1.00 Mouse [HID 1241:1155] on usb-0000:00:1d.0-2
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
input: AT Translated Set 2 keyboard as /class/input/input2
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000b134ea00]
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2008116k swap on /dev/hda2. Priority:-1 extents:1 across:2008116k
EXT3 FS on hda3, internal journal
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: no version for "ieee80211_wx_get_encodeext" found: kernel tainted.
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:16:17:4d:af:3b, IRQ 177
eth0: Auto-negotiation Enabled.
BUG: soft lockup detected on CPU#0!
<c0149b8d> softlockup_tick+0x9a/0xa9 <c0126901> update_process_times+0x38/0x5d
<c011312f> smp_apic_timer_interrupt+0x51/0x58 <c0103d0c> apic_timer_interrupt+0x1c/0x30
<c010ee8c> delay_pmtmr+0xd/0x15 <f8d73066> R1000_READ_GMII_REG+0x20/0x4a [r1000]
<f8d73153> r1000_set_speed_duplex+0x37/0x50 [r1000] <f8d73633> r1000_init_one+0x2ff/0x440 [r1000]
<c02810ec> pci_call_probe+0xf/0x12 <c0281122> __pci_device_probe+0x33/0x47
<c0281155> pci_device_probe+0x1f/0x34 <c02f5b76> driver_probe_device+0x43/0xa4
<c02f5c39> __driver_attach+0x0/0x60 <c02f5c72> __driver_attach+0x39/0x60
<c02f52bf> bus_for_each_dev+0x46/0x6c <c0276968> kobject_add+0xa7/0xc6
<c02f5cad> driver_attach+0x14/0x18 <c02f5c39> __driver_attach+0x0/0x60
<c02f56d4> bus_add_driver+0x54/0x87 <c02f60b5> driver_register+0x7f/0x82
<c028131b> __pci_register_driver+0x45/0x53 <f8d2200f> r1000_init_module+0xf/0x12 [r1000]
<c013699c> sys_init_module+0x8d/0x171 <c0102b8b> sysenter_past_esp+0x54/0x79
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Not Linked
I/O Base:0xC800(I/O port)
IRQ:177
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (8126 buckets, 65008 max) - 224 bytes per conntrack
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.4.0 20060119 on minor 0
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
|
hibernate.log (last 500 lines):
| Code: | hibernate: [98] Executing Swsusp2ConfigSet ...
hibernate: [98] Executing XStatusProgressKill ...
hibernate: [99] Executing DoSwsusp2 ...
hibernate: Activating suspend ...
hibernate: [97] Executing VbetoolRestoreState ...
hibernate: [97] Executing ChangeFromSwsuspVT ...
hibernate: [95] Executing XStatusResumeBegin ...
hibernate: [91] Executing GentooModulesAutoload ...
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading ieee80211
Loading ieee80211_crypt
Loading firmware_class
Loading ipw3945
Loading r1000
Loading tun
Loading hidp
Loading dm-crypt
hibernate: [90] Executing XStatusProgress ...
hibernate: [90] Executing ModulesLoad ...
hibernate: [89] Executing RestoreKernelModprobe ...
hibernate: [85] Executing XHacksResumeHook2 ...
hibernate: [80] Executing XStatusProgress ...
hibernate: [70] Executing XStatusProgress ...
hibernate: [70] Executing ClockRestore ...
hibernate: [60] Executing XStatusProgress ...
hibernate: [50] Executing XStatusProgress ...
hibernate: [40] Executing XStatusProgress ...
hibernate: [30] Executing XStatusProgress ...
hibernate: [30] Executing ServicesStart ...
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Loading: snd-seq-oss ... [ ok ]
* Restoring Mixer Levels ...
* Errors while restoring defaults, ignoring [ ok ]
hibernate: [20] Executing XStatusProgress ...
hibernate: [20] Executing MiscLaunchAuxFunc6 ...
Executing echo "Good morning!"...
Good morning!
hibernate: [15] Executing XStatusProgress ...
hibernate: [11] Executing XHacksResumeHook1 ...
hibernate: [10] Executing MiscLaunchAuxFunc4 ...
Executing sudo /etc/init.d/acpid start...
* Starting acpid ... [ ok ]
hibernate: [09] Executing MiscLaunchAuxFunc5 ...
Executing sudo /etc/init.d/local start...
* Starting local ... [ ok ]
hibernate: [05] Executing XStatusProgressKill ...
hibernate: [01] Executing XStatusReportErrors ...
hibernate-ram: [98] Executing XStatusProgressKill ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
hibernate-ram: [97] Executing VbetoolRestoreState ...
hibernate-ram: [95] Executing XStatusResumeBegin ...
hibernate-ram: [91] Executing GentooModulesAutoload ...
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading ieee80211
Loading ieee80211_crypt
Loading firmware_class
Loading ipw3945
Loading r1000
Loading tun
Loading hidp
Loading dm-crypt
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [90] Executing ModulesLoad ...
hibernate-ram: [89] Executing RestoreKernelModprobe ...
hibernate-ram: [85] Executing XHacksResumeHook2 ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [70] Executing ClockRestore ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStart ...
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Loading: snd-seq-oss ... [ ok ]
[ ok ]
* Restoring Mixer Levels ...
* Errors while restoring defaults, ignoring
[ ok ]
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc4 ...
Executing echo "Good morning!"...
Good morning!
hibernate-ram: [15] Executing XStatusProgress ...
hibernate-ram: [11] Executing XHacksResumeHook1 ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc3 ...
Executing sudo /etc/init.d/acpid start...
* Starting acpid ... [ ok ]
hibernate-ram: [05] Executing XStatusProgressKill ...
hibernate-ram: [01] Executing XStatusReportErrors ...
hibernate: [98] Executing Swsusp2ConfigSet ...
hibernate: [98] Executing XStatusProgressKill ...
hibernate: [99] Executing DoSwsusp2 ...
hibernate: Activating suspend ...
hibernate: [97] Executing VbetoolRestoreState ...
hibernate: [97] Executing ChangeFromSwsuspVT ...
hibernate: [95] Executing XStatusResumeBegin ...
hibernate: [91] Executing GentooModulesAutoload ...
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading ieee80211
Loading ieee80211_crypt
Loading firmware_class
Loading ipw3945
Loading r1000
Loading tun
Loading hidp
Loading dm-crypt
hibernate: [90] Executing XStatusProgress ...
hibernate: [90] Executing ModulesLoad ...
hibernate: [89] Executing RestoreKernelModprobe ...
hibernate: [85] Executing XHacksResumeHook2 ...
hibernate: [80] Executing XStatusProgress ...
Starting suspend at Thu Jul 20 10:59:07 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: [01] Executing LockFileGet ...
hibernate-ram: [01] Executing NewKernelFileCheck ...
hibernate-ram: [05] Executing XStatusSuspendBegin ...
hibernate-ram: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc1 ...
Executing sudo /etc/init.d/acpid stop...
* Stopping acpid ... [ ok ]
hibernate-ram: [11] Executing XHacksSuspendHook1 ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc2 ...
Executing echo "Good night!"...
Good night!
hibernate-ram: [20] Executing ProgramsStop ...
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStop ...
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* ERROR: "hotplug" has not yet been started.
* Stopping CPU Frequency Daemon ... [ ok ]
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [45] Executing FSTypesUnmount ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [89] Executing SaveKernelModprobe ...
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [91] Executing ModulesUnloadAll ...
hibernate-ram: [91] Executing ModulesUnloadBlacklist ...
hibernate-ram: [95] Executing XHacksSuspendHook2 ...
hibernate-ram: [95] Executing XStatusProgress ...
hibernate-ram: [97] Executing VbetoolSaveState ...
hibernate-ram: [98] Executing XStatusProgressKill ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
hibernate-ram: [97] Executing VbetoolRestoreState ...
hibernate-ram: [95] Executing XStatusResumeBegin ...
hibernate-ram: [91] Executing GentooModulesAutoload ...
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading ieee80211
Loading ieee80211_crypt
Loading firmware_class
Loading ipw3945
Loading r1000
Loading tun
Loading hidp
Loading dm-crypt
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [90] Executing ModulesLoad ...
Starting suspend at Thu Jul 20 09:03:19 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: [01] Executing LockFileGet ...
hibernate-ram: [01] Executing NewKernelFileCheck ...
hibernate-ram: [05] Executing XStatusSuspendBegin ...
hibernate-ram: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc1 ...
Executing sudo /etc/init.d/acpid stop...
* Stopping acpid ... [ ok ]
hibernate-ram: [11] Executing XHacksSuspendHook1 ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc2 ...
Executing echo "Good night!"...
Good night!
hibernate-ram: [20] Executing ProgramsStop ...
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStop ...
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* ERROR: "hotplug" has not yet been started.
* Stopping CPU Frequency Daemon ... [ ok ]
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [45] Executing FSTypesUnmount ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [89] Executing SaveKernelModprobe ...
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [91] Executing ModulesUnloadAll ...
hibernate-ram: [91] Executing ModulesUnloadBlacklist ...
hibernate-ram: [95] Executing XHacksSuspendHook2 ...
hibernate-ram: [95] Executing XStatusProgress ...
hibernate-ram: [98] Executing XStatusProgressKill ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
hibernate-ram: [95] Executing XStatusResumeBegin ...
hibernate-ram: [91] Executing GentooModulesAutoload ...
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading ieee80211
Loading ieee80211_crypt
Loading firmware_class
Loading ipw3945
Loading r1000
Loading tun
Loading hidp
Loading dm-crypt
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [90] Executing ModulesLoad ...
hibernate-ram: [89] Executing RestoreKernelModprobe ...
hibernate-ram: [85] Executing XHacksResumeHook2 ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [70] Executing ClockRestore ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStart ...
* Enabling ondemand cpufreq governor ... [ ok ]
* Starting CPU Frequency Daemon ... [ ok ]
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Loading: snd-seq-oss ... [ ok ]
[ ok ]
* Restoring Mixer Levels ...
* Errors while restoring defaults, ignoring
[ ok ]
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc4 ...
Executing echo "Good morning!"...
Good morning!
hibernate-ram: [15] Executing XStatusProgress ...
hibernate-ram: [11] Executing XHacksResumeHook1 ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc3 ...
Executing sudo /etc/init.d/acpid start...
* Starting acpid ... [ ok ]
hibernate-ram: [05] Executing XStatusProgressKill ...
hibernate-ram: [01] Executing XStatusReportErrors ...
hibernate-ram: [01] Executing NoteLastResume ...
hibernate-ram: [01] Executing LockFilePut ...
Resumed at Thu Jul 20 09:08:28 CEST 2006
Starting suspend at Thu Jul 20 10:30:15 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: [01] Executing LockFileGet ...
hibernate-ram: [01] Executing NewKernelFileCheck ...
hibernate-ram: [05] Executing XStatusSuspendBegin ...
hibernate-ram: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc1 ...
Executing sudo /etc/init.d/acpid stop...
* Stopping acpid ... [ ok ]
hibernate-ram: [11] Executing XHacksSuspendHook1 ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc2 ...
Executing echo "Good night!"...
Good night!
hibernate-ram: [20] Executing ProgramsStop ...
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStop ...
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* Stopping CPU Frequency Daemon ... [ ok ]
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [45] Executing FSTypesUnmount ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [89] Executing SaveKernelModprobe ...
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [91] Executing ModulesUnloadAll ...
hibernate-ram: [91] Executing ModulesUnloadBlacklist ...
hibernate-ram: [95] Executing XHacksSuspendHook2 ...
hibernate-ram: [95] Executing XStatusProgress ...
hibernate-ram: [98] Executing XStatusProgressKill ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
Starting suspend at Thu Jul 20 11:10:46 CEST 2006
hibernate-ram: [01] Executing CheckLastResume ...
hibernate-ram: [01] Executing LockFileGet ...
hibernate-ram: [01] Executing NewKernelFileCheck ...
hibernate-ram: [05] Executing XStatusSuspendBegin ...
hibernate-ram: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate-ram: [10] Executing MiscLaunchAuxFunc1 ...
Executing sudo /etc/init.d/acpid stop...
* Stopping acpid ... [ ok ]
hibernate-ram: [11] Executing XHacksSuspendHook1 ...
hibernate-ram: [20] Executing MiscLaunchAuxFunc2 ...
Executing echo "Good night!"...
Good night!
hibernate-ram: [20] Executing ProgramsStop ...
hibernate-ram: [20] Executing XStatusProgress ...
hibernate-ram: [30] Executing ServicesStop ...
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* ERROR: "hotplug" has not yet been started.
* Stopping CPU Frequency Daemon ... [ ok ]
* Stopping laptop_mode ... [ ok ]
hibernate-ram: [30] Executing XStatusProgress ...
hibernate-ram: [40] Executing XStatusProgress ...
hibernate-ram: [45] Executing FSTypesUnmount ...
hibernate-ram: [50] Executing XStatusProgress ...
hibernate-ram: [60] Executing XStatusProgress ...
hibernate-ram: [70] Executing XStatusProgress ...
hibernate-ram: [80] Executing XStatusProgress ...
hibernate-ram: [89] Executing SaveKernelModprobe ...
hibernate-ram: [90] Executing XStatusProgress ...
hibernate-ram: [98] Executing XStatusProgressKill ...
hibernate-ram: [99] Executing DoSysfsPowerStateSuspend ...
hibernate-ram: Activating sysfs power state mem ...
|
Last edited by juangamnik on Fri Jul 21, 2006 9:46 pm; edited 1 time in total |
|
| Back to top |
|
 |
juangamnik
n00b
Joined: 10 May 2005
Posts: 17
|
| Posted: Thu Jul 20, 2006 5:18 pm Post subject: |
|
|
I tried it again:
tty 12 sais:
| Code: | ...
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Freezing cpus ...
CPU.1 is now offline
SMP alternatives: switching to UP code
|
At this point I see a blinking cursor and nothing else. Changing to tty 7 shows that my hibernation script is still running (and cannot be terminated), i really have only one core (top and 1) and shutting down doesn't work. Everybody seem to have problems with resuming, my problem starts with suspending  .
dmesg after suspend trial:
| Code: | Linux version 2.6.17-suspend2 (root@joclient) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Sat Jul 15 07:01:39 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30672 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 MSI ) @ 0x000f88d0
ACPI: RSDT (v001 MSI 1057 0x06212006 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 MSI 1057 0x06212006 MSFT 0x00000097) @ 0x3f7d0200
ACPI: MADT (v001 MSI OEMAPIC 0x06212006 MSFT 0x00000097) @ 0x3f7d0390
ACPI: MCFG (v001 MSI OEMMCFG 0x06212006 MSFT 0x00000097) @ 0x3f7d03f0
ACPI: OEMB (v001 MSI AMI_OEM 0x06212006 MSFT 0x00000097) @ 0x3f7de040
ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ 0x3f7d49b0
ACPI: DSDT (v001 MSI 1057 0x06212006 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 real_root=/dev/hda3 noresume2 init=/linuxrc splash=silent vga=0x360
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c04c4000 soft=c04bc000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2000.480 MHz processor.
Using pmtmr for high-res timesource
Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024176k/1040192k available (2651k kernel code, 15196k reserved, 912k data, 212k init, 122688k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4005.02 BogoMIPS (lpj=8010056)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c04c5000 soft=c04bd000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.61 BogoMIPS (lpj=8001224)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
Total of 2 processors activated (8005.64 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 1986k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: fe100000-fe8fffff
PREFETCH window: bdf00000-bfefffff
PCI: Bridge: 0000:00:1c.1
IO window: c000-cfff
MEM window: fe000000-fe0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: fd600000-fdefffff
PREFETCH window: bbf00000-bdefffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1153405663.420:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
vesafb: framebuffer at 0xd0000000, mapped to 0xf8a00000, using 2000k, total 7872k
vesafb: mode is 1280x800x8, linelength=1280, pages=6
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (57 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM chipsets
intelfb: Version 0.9.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: FUJITSU MHV2100AH, ATA DISK drive
hdb: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
Netfilter messages via NETLINK v0.30.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
ACPI wakeup devices:
P0PC USB0 USB1 USB2 USB3 EUSB MC97 P0P7 P0P8 P0P9 P0P1 OZF1 OZF2 OZF3 P0P5 P0P4 P0P3 AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 212k freed
Suspend2 2.2.7.3: Swapwriter: Signature found.
Suspend2 2.2.7.3: Resuming enabled.
Suspend2 2.2.7.3: Resuming disabled as requested.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfeb3fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
usb 2-2: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
input: HID 1241:1155 as /class/input/input1
input: USB HID v1.00 Mouse [HID 1241:1155] on usb-0000:00:1d.0-2
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
input: AT Translated Set 2 keyboard as /class/input/input2
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000b134ea00]
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2008116k swap on /dev/hda2. Priority:-1 extents:1 across:2008116k
EXT3 FS on hda3, internal journal
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: no version for "ieee80211_wx_get_encodeext" found: kernel tainted.
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:16:17:4d:af:3b, IRQ 177
eth0: Auto-negotiation Enabled.
BUG: soft lockup detected on CPU#0!
<c0149b8d> softlockup_tick+0x9a/0xa9 <c0126901> update_process_times+0x38/0x5d
<c011312f> smp_apic_timer_interrupt+0x51/0x58 <c0103d0c> apic_timer_interrupt+0x1c/0x30
<c010ee8c> delay_pmtmr+0xd/0x15 <f8d73066> R1000_READ_GMII_REG+0x20/0x4a [r1000]
<f8d73153> r1000_set_speed_duplex+0x37/0x50 [r1000] <f8d73633> r1000_init_one+0x2ff/0x440 [r1000]
<c02810ec> pci_call_probe+0xf/0x12 <c0281122> __pci_device_probe+0x33/0x47
<c0281155> pci_device_probe+0x1f/0x34 <c02f5b76> driver_probe_device+0x43/0xa4
<c02f5c39> __driver_attach+0x0/0x60 <c02f5c72> __driver_attach+0x39/0x60
<c02f52bf> bus_for_each_dev+0x46/0x6c <c0276968> kobject_add+0xa7/0xc6
<c02f5cad> driver_attach+0x14/0x18 <c02f5c39> __driver_attach+0x0/0x60
<c02f56d4> bus_add_driver+0x54/0x87 <c02f60b5> driver_register+0x7f/0x82
<c028131b> __pci_register_driver+0x45/0x53 <f8d2200f> r1000_init_module+0xf/0x12 [r1000]
<c013699c> sys_init_module+0x8d/0x171 <c0102b8b> sysenter_past_esp+0x54/0x79
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Not Linked
I/O Base:0xC800(I/O port)
IRQ:177
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (8126 buckets, 65008 max) - 224 bytes per conntrack
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.4.0 20060119 on minor 0
atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
usb 5-2: USB disconnect, address 2
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Freezing cpus ...
CPU 1 is now offline
SMP alternatives: switching to UP code
|
var/log/messages (last 100 lines):
| Code: | Jul 20 16:27:32 joclient kde(pam_unix)[10089]: session opened for user jonny by (uid=0)
Jul 20 16:28:17 joclient su[10479]: Successful su for root by jonny
Jul 20 16:28:17 joclient su[10479]: + pts/3 jonny:root
Jul 20 16:28:17 joclient su(pam_unix)[10479]: session opened for user root by (uid=1000)
Jul 20 16:28:20 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/net.eth1 restart
Jul 20 16:28:24 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/usr/bin/vpnc
Jul 20 16:28:24 joclient rc-scripts: Configuration not set for eth1 - assuming dhcp
Jul 20 16:28:24 joclient rc-scripts: eth1 does not exist
Jul 20 16:28:25 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntp-client start
Jul 20 16:28:25 joclient rc-scripts: Failed to set clock
Jul 20 16:28:25 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntpd start
Jul 20 16:28:26 joclient ntpd[11001]: ntpd 4.2.0a@1.1190-r Sun Jun 25 23:17:49 CEST 2006 (1)
Jul 20 16:28:26 joclient ntpd[11001]: precision = 1.000 usec
Jul 20 16:28:26 joclient ntpd[11001]: Listening on interface wildcard, 0.0.0.0#123
Jul 20 16:28:26 joclient ntpd[11001]: Listening on interface lo, 127.0.0.1#123
Jul 20 16:28:26 joclient ntpd[11001]: kernel time sync status 0040
Jul 20 16:28:26 joclient ntpd[11001]: frequency initialized 1.475 PPM from /var/lib/ntp/ntp.drift
Jul 20 16:28:59 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/usr/bin/vpnc
Jul 20 16:29:27 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/net.eth1 restart
Jul 20 16:29:28 joclient rc-scripts: Configuration not set for eth1 - assuming dhcp
Jul 20 16:29:28 joclient rc-scripts: eth1 does not exist
Jul 20 16:29:28 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntp-client start
Jul 20 16:29:28 joclient rc-scripts: Failed to set clock
Jul 20 16:29:28 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntpd start
Jul 20 16:29:28 joclient rc-scripts: WARNING: "ntpd" has already been started.
Jul 20 16:29:31 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/usr/bin/vpnc
Jul 20 16:29:50 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
Jul 20 16:29:50 joclient atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
Jul 20 16:29:51 joclient atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
Jul 20 16:29:51 joclient atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
Jul 20 16:29:51 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:51 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:51 joclient atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:51 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:51 joclient usb 5-2: new full speed USB device using uhci_hcd and address 2
Jul 20 16:29:51 joclient usb 5-2: configuration #1 chosen from 1 choice
Jul 20 16:29:52 joclient Bluetooth: HCI USB driver ver 2.9
Jul 20 16:29:52 joclient hcid[9572]: HCI dev 0 registered
Jul 20 16:29:52 joclient usbcore: registered new driver hci_usb
Jul 20 16:29:52 joclient hcid[9572]: HCI dev 0 up
Jul 20 16:29:52 joclient hcid[9572]: Starting security manager 0
Jul 20 16:29:52 joclient hcid[9572]: return_link_keys (sba=00:0D:F0:23:1D:C4, dba=00:07:61:31:DD:52)
Jul 20 16:29:55 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:55 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:55 joclient atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:55 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:57 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
Jul 20 16:29:57 joclient atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
Jul 20 16:29:57 joclient atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
Jul 20 16:29:57 joclient atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
Jul 20 16:29:57 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:57 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:57 joclient atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:57 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:57 joclient usb 5-2: USB disconnect, address 2
Jul 20 16:29:57 joclient hcid[9572]: HCI dev 0 down
Jul 20 16:29:57 joclient hcid[9572]: Stoping security manager 0
Jul 20 16:29:57 joclient sdpd[9574]: terminating...
Jul 20 16:29:57 joclient hcid[9572]: Exit.
Jul 20 16:29:57 joclient atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:57 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:29:58 joclient atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
Jul 20 16:29:58 joclient atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
Jul 20 16:30:01 joclient cron[11776]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 20 16:30:03 joclient ACPI: PCI interrupt for device 0000:03:00.0 disabled
Jul 20 16:30:03 joclient ieee80211_crypt: unregistered algorithm 'NULL'
Jul 20 16:30:06 joclient ieee80211_crypt: registered algorithm 'NULL'
Jul 20 16:30:06 joclient ieee80211: 802.11 data/management/control stack, 1.1.13
Jul 20 16:30:06 joclient ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Jul 20 16:30:06 joclient ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
Jul 20 16:30:06 joclient ipw3945: Copyright(c) 2003-2006 Intel Corporation
Jul 20 16:30:06 joclient ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
Jul 20 16:30:06 joclient PCI: Setting latency timer of device 0000:03:00.0 to 64
Jul 20 16:30:06 joclient ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jul 20 16:30:07 joclient ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Jul 20 16:30:09 joclient dhcpcd[12625]: MAC address = 00:13:02:0f:58:e9
Jul 20 16:30:09 joclient dhcpcd[12625]: verified 129.217.138.35 address is not in use
Jul 20 16:30:09 joclient dhcpcd[12625]: your IP address = 129.217.138.35
Jul 20 16:30:12 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/net.eth1 restart
Jul 20 16:30:13 joclient dhcpcd[12627]: terminating on signal 15
Jul 20 16:30:15 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/usr/bin/vpnc
Jul 20 16:30:19 joclient ipw3945: Error sending LEDS_CMD: time out after 500ms.
Jul 20 16:30:23 joclient dhcpcd[13819]: MAC address = 00:13:02:0f:58:e9
Jul 20 16:30:23 joclient dhcpcd[13819]: verified 129.217.138.35 address is not in use
Jul 20 16:30:23 joclient dhcpcd[13819]: your IP address = 129.217.138.35
Jul 20 16:30:23 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntp-client start
Jul 20 16:30:26 joclient vpnc: local address for 129.217.139.42 is 129.217.139.42
Jul 20 16:30:26 joclient vpnc: local address for 129.217.129.34 is 129.217.138.35
Jul 20 19:01:29 joclient sudo: jonny : TTY=unknown ; PWD=/home/jonny ; USER=root ; COMMAND=/etc/init.d/ntpd start
Jul 20 19:01:29 joclient rc-scripts: WARNING: "ntpd" has already been started.
Jul 20 19:07:41 joclient cpufreqd: term_handler : Caught TERM signal (Terminated), forcing exit.
Jul 20 19:07:41 joclient rc-scripts: WARNING: you are stopping a boot service.
Jul 20 19:07:41 joclient ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Jul 20 19:07:41 joclient Freezing cpus ...
Jul 20 19:07:42 joclient CPU 1 is now offline
Jul 20 19:07:42 joclient SMP alternatives: switching to UP code
Jul 20 19:10:01 joclient cron[14457]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 20 19:10:22 joclient su[14468]: Successful su for root by jonny
Jul 20 19:10:22 joclient su[14468]: + pts/2 jonny:root
Jul 20 19:10:22 joclient su(pam_unix)[14468]: session opened for user root by (uid=1000)
|
/sys/power/state:
|
|
| Back to top |
|
|
juangamnik
n00b
Joined: 10 May 2005
Posts: 17
|
| Posted: Fri Jul 21, 2006 9:26 pm Post subject: |
|
|
I got suspend running one time but the second time I got the same error my full dmesg including the working first suspend:
| Code: | 0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
Netfilter messages via NETLINK v0.30.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
ACPI wakeup devices:
P0PC USB0 USB1 USB2 USB3 EUSB MC97 P0P7 P0P8 P0P9 P0P1 OZF1 OZF2 OZF3 P0P5 P0P4 P0P3 AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 212k freed
Suspend2 2.2.7.3: Swapwriter: Signature found.
Suspend2 2.2.7.3: Resuming enabled.
Suspend2 2.2.7.3: Resuming disabled as requested.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfeb3fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
usb 5-2: new full speed USB device using uhci_hcd and address 2
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
usb 5-2: configuration #1 chosen from 1 choice
input: AT Translated Set 2 keyboard as /class/input/input1
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000b134ea00]
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2008116k swap on /dev/hda2. Priority:-1 extents:1 across:2008116k
EXT3 FS on hda3, internal journal
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: no version for "ieee80211_wx_get_encodeext" found: kernel tainted.
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:16:17:4d:af:3b, IRQ 177
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
eth0: Auto-negotiation Enabled.
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Linked
Link Speed:100Mbps
Duplex mode:Full-Duplex
I/O Base:0xC800(I/O port)
IRQ:177
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (8126 buckets, 65008 max) - 224 bytes per conntrack
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.4.0 20060119 on minor 0
psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
usb 5-2: USB disconnect, address 2
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
hci_acldata_packet: hci0 ACL packet for unknown connection handle 42
input: Bluetooth HID Boot Protocol Device as /class/input/input2
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ieee80211_crypt: unregistered algorithm 'NULL'
Freezing cpus ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
hci_usb 5-2:1.1: no suspend for driver hci_usb?
hci_usb 5-2:1.0: no suspend for driver hci_usb?
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing fea80000)
PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
PM: Writing back config space on device 0000:00:1c.0 at offset f (was 20100, writing 20105)
PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810008)
PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PM: Writing back config space on device 0000:00:1c.1 at offset f (was 20200, writing 2020b)
PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810008)
PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PM: Writing back config space on device 0000:00:1c.2 at offset f (was 20300, writing 2030a)
PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was f0, writing 200000f0)
PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810008)
PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100106, writing 100506)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb5: root hub lost power or was reset
__tx_submit: hci0 tx submit failed urb f3be10d4 type 2 err -19
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Writing back config space on device 0000:00:1e.0 at offset f (was 20000, writing 200ff)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing fe0e0000)
PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 4, writing fe0ff004)
PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 1, writing c801)
PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 8)
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100007)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing fdfff000)
PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 8)
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100002)
PM: Writing back config space on device 0000:01:04.0 at offset f (was 100, writing 105)
PM: Writing back config space on device 0000:01:04.0 at offset 3 (was 800000, writing 804008)
PM: Writing back config space on device 0000:01:04.0 at offset 1 (was 2100017, writing 2180017)
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PM: Writing back config space on device 0000:01:04.2 at offset f (was 1ff, writing 105)
PM: Writing back config space on device 0000:01:04.2 at offset 4 (was 0, writing fdefec00)
PM: Writing back config space on device 0000:01:04.2 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:01:04.2 at offset 1 (was 4100000, writing 84100002)
PM: Writing back config space on device 0000:01:04.3 at offset f (was 1ff, writing 105)
PM: Writing back config space on device 0000:01:04.3 at offset 4 (was 0, writing fdeff000)
PM: Writing back config space on device 0000:01:04.3 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:01:04.3 at offset 1 (was 4100000, writing 84100002)
pnp: Failed to activate device 00:04.
pnp: Failed to activate device 00:05.
__tx_submit: hci0 tx submit failed urb f7798e54 type 2 err -19
usb 5-2: USB disconnect, address 3
Thawing cpus ...
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c011a15a
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: sha256 aes hci_usb i915 drm xt_state xt_tcpudp iptable_filter iptable_mangle iptable_nat ip_nat ip_conntrack ip_tables x_tables rfcomm rtc dm_crypt hidp l2cap bluetooth tun dm_mirror dm_mod sata_mv ata_piix ahci sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil sata_promise libata sbp2 ohci1394 ieee1394 sl811_hcd ohci_hcd uhci_hcd usb_storage usbhid ehci_hcd usbcore
CPU: 0
EIP: 0060:[<c011a15a>] Tainted: GF VLI
EFLAGS: 00010046 (2.6.17-suspend2 #1)
EIP is at __wake_up_common+0x10/0x4b
eax: 00000202 ebx: 00000001 ecx: 00000001 edx: 00000000
esi: 00000000 edi: c18e8e00 ebp: e3b82ec4 esp: e3b82eb4
ds: 007b es: 007b ss: 0068
Process depscan.sh (pid: 12354, threadinfo=e3b82000 task=f1a9f030)
Stack: 00000001 c18e8e00 00000000 00000001 e3b82ef4 c011a1bc c18e8e00 00000001
00000001 00000000 00000000 00000202 00000001 c18e8e00 ec91498c ec91498c
f22abd14 c016efca 00000000 00000008 f75b86c0 c016f134 ec91498c 00000000
Call Trace:
<c011a1bc> __wake_up+0x27/0x3b <c016efca> pipe_release+0x58/0x8e
<c016f134> pipe_write_release+0x1a/0x1e <c0164ff6> __fput+0x81/0x12b
<c0163c6d> filp_close+0x4c/0x55 <c0120978> close_files+0x4b/0x5b
<c01209c5> put_files_struct+0x14/0x3c <c01212eb> do_exit+0x1aa/0x367
<c012153a> sys_exit_group+0x0/0x11 <c0102b8b> sysenter_past_esp+0x54/0x79
Code: e8 8d 65 f4 5b 5e 5f 5d c3 55 89 e5 8b 45 08 8b 50 04 89 55 08 5d e9 8c e4 ff ff 55 89 e5 57 56 53 51 8b 7d 08 8b 5d 10 8b 57 04 <8b> 02 89 45 f0 8d 47 04 39 c2 74 27 8b 72 f4 8d 42 f4 ff 75 18
EIP: [<c011a15a>] __wake_up_common+0x10/0x4b SS:ESP 0068:e3b82eb4
<1>Fixing recursive fault but reboot is needed!
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c04c5000 soft=c04bd000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.45 BogoMIPS (lpj=8000913)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
APIC error on CPU1: 00(40)
CPU1 is up
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:16:17:4d:af:3b, IRQ 177
eth0: Auto-negotiation Enabled.
usb 5-2: new full speed USB device using uhci_hcd and address 4
usb 5-2: configuration #1 chosen from 1 choice
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Linked
Link Speed:100Mbps
Duplex mode:Full-Duplex
I/O Base:0xC800(I/O port)
IRQ:177
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
hci_acldata_packet: hci0 ACL packet for unknown connection handle 43
input: Bluetooth HID Boot Protocol Device as /class/input/input3
input: Bluetooth HID Boot Protocol Device as /class/input/input4
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ieee80211_crypt: unregistered algorithm 'NULL'
Freezing cpus ...
CPU 1 is now offline
SMP alternatives: switching to UP code
|
|
|
| Back to top |
|
|
Sagi
n00b
Joined: 17 Sep 2006
Posts: 9
|
| Posted: Sat Sep 23, 2006 1:15 pm Post subject: |
|
|
I've got exactly the same. I own a MSI Megabook, equipped with a core 2 duo merom (so that might be different), but my log looks almost exactly the same.
Sometimes suspending works perfectly, but sometimes it doesn't, and I get the error as described above.
| Code: | Freezing cpus ...
CPU.1 is now offline |
(which results in having to switch the laptop off using the powerbutton, it does show unrecognized keys if I press them though.)
I have to determine if the use of my wireless connection has influence on the behavior while suspending to ram. I'll be following this thread closely while investigating myself.
Furthermore it might be related to the APIC error both of our systems throw.
Keep me up to date on your findings! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
