Dazed and Confused after installing a 12 Port PBX card ?

[nellson]

I am waorking on an Asterisk PBX setup at home, in a intel dual P4 3, Ghz. This is an Intel Server MB.

anyway, I installed a OpenVox A1200P 12 port card with 2 modules installed, so I can hook it to my phone system. It was working OK for a day, then the system crashed (locked up hard no display) When I rebooted, I get this just after the card is found.

I need some guidance on what this means and what I can do about it?

[17179586.836000] EDAC MC: Ver: 2.0.0 Jun 30 2006
[17179586.844000] EDAC e752x: tolm = 80000, remapbase = ffc000, remaplimit = 0
[17179586.844000] EDAC MC0: Giving out device to "e752x_edac" E7525: PCI 0000:00:00.0
[17179587.012000] Zapata Telephony Interface Registered on major 196
[17179587.012000] Zaptel Version: 1.2.8 Echo Canceller: KB1
[17179587.052000] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[17179587.052000] OpenVox A1200P version: 1.1
[17179587.052000] OpenVox A1200P passed register test
[17179587.128000] evbug.c: Connected device: "PC Speaker", isa0061/input0
[17179587.128000] evbug.c: Connected device: "ImPS/2 Logitech Wheel Mouse", isa0060/serio1/input0
[17179587.128000] evbug.c: Connected device: "AT Translated Set 2 keyboard", isa0060/serio0/input0
[17179587.952000] Module 0: Installed -- AUTO FXO (FCC mode)
[17179589.104000] Module 1: Installed -- AUTO FXS/DPO
[17179589.104000] Module 2: Not installed
[17179589.104000] Module 3: Not installed
[17179589.104000] Module 4: Not installed
[17179589.104000] Module 5: Not installed
[17179589.104000] Module 6: Not installed
[17179589.104000] Module 7: Not installed
[17179589.104000] Module 8: Not installed
[17179589.104000] Module 9: Not installed
[17179589.104000] Module 10: Not installed
[17179589.104000] Module 11: Not installed
[17179589.108000] Found a OpenVox A1200P: Version 1.1 (2 modules)
[17179589.108000] buffer re-sync occur from 0 to 2
[17179589.268000] hw_random hardware driver 1.0.0 loaded
[17179590.992000] ReiserFS: dm-6: Removing [9478 180624 0x0 SD]..done
[17179590.992000] ReiserFS: dm-6: Removing [9478 180492 0x0 SD]..done
[17179590.992000] ReiserFS: dm-6: Removing [9478 180353 0x0 SD]..done
[17179590.992000] ReiserFS: dm-6: Removing [9478 180094 0x0 SD]..done
[17179590.992000] ReiserFS: dm-6: Removing [9478 180074 0x0 SD]..done
[17179590.992000] ReiserFS: dm-6: There were 5 uncompleted unlinks/truncates. Completed
[17179591.212000] vmmon: module license 'unspecified' taints kernel.
[17179591.216000] /dev/vmmon[4838]: Module vmmon: registered with major=10 minor=165
[17179591.216000] /dev/vmmon[4838]: Module vmmon: initialized
[17179591.232000] ipmi message handler version 39.0
[17179591.240000] IPMI Watchdog: driver initialized
[17179591.248000] ipmi device interface
[17179591.388000] IPMI SMB Interface driver
[17179591.388000] ipmi_smb: DMI specifies SSIF @ 0x42, slave address 0x84
[17179594.024000] Uhhuh. NMI received for unknown reason 00 on CPU 0.
[17179594.024000] Dazed and confused, but trying to continue
[17179594.024000] Do you have a strange power saving mode enabled?
[17179597.992000] ipmi: Found new BMC (man_id: 0x000322, prod_id: 0x4311, dev_id: 0x20)
[17179598.012000] IPMI Watchdog: Unable to register misc device
[17179598.112000] i2c /dev entries driver
[17179598.132000] IPMI System Interface driver.
[17179598.192000] ipmi_si: Unable to find any System Interface(s)
[17179603.892000] Uhhuh. NMI received for unknown reason 00 on CPU 0.
[17179603.892000] Dazed and confused, but trying to continue
[17179603.892000] Do you have a strange power saving mode enabled?
[17179605.724000] Uhhuh. NMI received for unknown reason 00 on CPU 0.
[17179605.724000] Dazed and confused, but trying to continue
[17179605.724000] Do you have a strange power saving mode enabled?
[17179607.872000] Uhhuh. NMI received for unknown reason 00 on CPU 0.

Repeats like crazy, gets to the login and I can SSH in and used dmesg to get this.. 10 mins later, boom down it goes again.

I was unable to get the emerge info dump yet, I will add it when I get home to the system. (I am having my wife reboot it for me)