| View previous topic :: View next topic |
| Author |
Message |
AchilleTalon
Guru
Joined: 11 Apr 2004
Posts: 368
Location: Montreal, Quebec, Canada
|
 Posted: Mon Oct 09, 2006 12:48 am Post subject: Logitech USB Mouse not working |
 |
|
My Logitech USB mouse is no longer working. Since I am not using it all the time with my laptop, I probably upgraded some software and it stopped working. I am unable to find out the root cause of this problem.
The mouse is not working in console (gpm) or Xorg mode. It is recognized when I plug the RF USB stick and I am getting the following messages after having enabled the DEBUG in the scripts:
| Quote: |
Oct 8 20:38:02 [kernel] usb 1-1: new low speed USB device using uhci_hcd and address 3
Oct 8 20:38:02 [kernel] input: Logitech USB Receiver as /class/input/input3
Oct 8 20:38:02 [default.hotplug] arguments (usb) env (SUBSYSTEM=usb_OLDPWD=/_DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1_ACTION=add_PWD=/etc/hotplug_UDEV_LOG=3_UDEVD_EVENT=1_SHLVL=1_PHYSDEVDRIVER=usb_DEBUG=yes_PHYSDEVBUS=usb_SEQNUM=1602__=/bin/env)
Oct 8 20:38:02 [default.hotplug] invoke /etc/hotplug/usb.agent ()
Oct 8 20:38:02 [default.hotplug] arguments (usb) env (SUBSYSTEM=usb_OLDPWD=/_DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0_ACTION=add_MODALIAS=usb:v046DpC510d3410dc00dsc00dp00ic03isc01ip02_PWD=/etc/hotplug_UDEV_LOG=3_UDEVD_EVENT=1_SHLVL=1_DEVICE=/proc/bus/usb/001/003_INTERFACE=3/1/2_PRODUCT=46d/c510/3410_TYPE=0/0/0_DEBUG=yes_PHYSDEVBUS=usb_SEQNUM=1603__=/bin/env)
Oct 8 20:38:02 [default.hotplug] invoke /etc/hotplug/usb.agent ()
Oct 8 20:38:02 [usb.agent] Setup usbhid for USB product 46d/c510/3410
Oct 8 20:38:03 [default.hotplug] arguments (input) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0_EV=7_SUBSYSTEM=input_OLDPWD=/_DEVPATH=/class/input/input3_NAME="Logitech USB Receiver"_ACTION=add_MODALIAS=input:b0003v046DpC510e3410-e0,1,2,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,amlsfw_PWD=/etc/hotplug_UDEV_LOG=3_REL=143_KEY=ffff0000 0 0 0 0 0 0 0 0_UDEVD_EVENT=1_SHLVL=1_PHYSDEVDRIVER=usbhid_PHYS="usb-0000:00:07.2-1/input0"_PRODUCT=3/46d/c510/3410_DEBUG=yes_PHYSDEVBUS=usb_UNIQ=""_SEQNUM=1604__=/bin/env)
Oct 8 20:38:03 [default.hotplug] invoke /etc/hotplug/input.agent ()
Oct 8 20:38:03 [input.agent] ... no modules for INPUT product 3/46d/c510/3410
Oct 8 20:38:03 [default.hotplug] arguments (input) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0_SUBSYSTEM=input_OLDPWD=/_DEVPATH=/class/input/input3/mouse1_MINOR=33_ACTION=add_PWD=/etc/hotplug_UDEV_LOG=3_MAJOR=13_UDEVD_EVENT=1_DEVNAME=/dev/input/mouse1_SHLVL=1_PHYSDEVDRIVER=usbhid_DEBUG=yes_PHYSDEVBUS=usb_SEQNUM=1605__=/bin/env)
Oct 8 20:38:03 [default.hotplug] invoke /etc/hotplug/input.agent ()
Oct 8 20:38:03 [input.agent] ... no modules for INPUT product
Oct 8 20:38:03 [default.hotplug] arguments (usb_device) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1_SUBSYSTEM=usb_device_OLDPWD=/_DEVPATH=/class/usb_device/usbdev1.3_MINOR=2_ACTION=add_PWD=/etc/hotplug_UDEV_LOG=3_MAJOR=189_UDEVD_EVENT=1_DEVNAME=/dev/bus/usb/001/003_SHLVL=1_PHYSDEVDRIVER=usb_DEBUG=yes_PHYSDEVBUS=usb_SEQNUM=1606__=/bin/env)
Oct 8 20:38:03 [default.hotplug] no runnable /etc/hotplug/usb_device.agent is installed
|
I am using special file /dev/input/mice in the Xorg and gpm configuration. Which module am I supposed to compile to make it working?
_________________
Achille Talon Hop! |
|
| Back to top |
|
 |
lost+found
Guru
Joined: 15 Nov 2004
Posts: 509
Location: North~Sea~Coa~s~~t~~~
|
| Posted: Mon Oct 09, 2006 7:39 am Post subject: |
|
|
edit
Last edited by lost+found on Mon Oct 09, 2006 5:52 pm; edited 1 time in total |
|
| Back to top |
|
|
AchilleTalon
Guru
Joined: 11 Apr 2004
Posts: 368
Location: Montreal, Quebec, Canada
|
| Posted: Mon Oct 09, 2006 4:09 pm Post subject: |
|
|
The problem is there is no module found for INPUT as per the message in the syslog. It doesn't change anything if I configure the gpm as you suggest. In fact, I had already tested with a similar configuration.
BTW, since it is a laptop, I have as well an integrated pointing device which is working perfectly. Also, I have no problem to make my USB port working with USB memory sticks. And, again, as per the syslog messages the USB identify the mouse, but seems no be able to load a module. Which one is it supposed to load? Is there something wrong with the configuration? The /lib/modules/`uname -r`/modules.inputmap is as follow:
| Code: |
# module matchBits bustype vendor product version evBits keyBits relBits absBits mscBits ledBits sndBits ffBits [swBits] driver_info
evdev 0x0 0x0 0x0 0x0 0x0 0 0 0 0 0 0 0 0 0 0x1
evbug 0x0 0x0 0x0 0x0 0x0 0 0 0 0 0 0 0 0 0 0x1
|
And lsmod is giving the following:
| Code: |
Module Size Used by
usbhid 28356 0
snd_pcm_oss 33760 0
snd_mixer_oss 14112 3 snd_pcm_oss
ehci_hcd 36936 0
i2c_piix4 7568 0
uhci_hcd 25420 0
snd_cs46xx 73096 1
snd_ac97_codec 80320 1 snd_cs46xx
snd_ac97_bus 1856 1 snd_ac97_codec
snd_virmidi 3520 2
snd_mpu401_uart 5632 0
snd_pcm 68456 3 snd_pcm_oss,snd_cs46xx,snd_ac97_codec
snd_page_alloc 7400 2 snd_cs46xx,snd_pcm
snd_seq_virmidi 5184 1 snd_virmidi
snd_seq_midi 5792 0
snd_rawmidi 17824 4 snd_cs46xx,snd_mpu401_uart,snd_seq_virmidi,snd_seq_midi
ipv6 204032 12
zlib_inflate 14272 0
zlib_deflate 18456 0
nls_utf8 1664 9
nls_iso8859_15 4384 0
coda 28036 3
savagefb 20932 0
cfbimgblt 2624 1 savagefb
cfbfillrect 3424 1 savagefb
cfbcopyarea 3392 1 savagefb
psmouse 32904 0
ohci_hcd 29540 0
usbcore 115136 5 usbhid,ehci_hcd,uhci_hcd,ohci_hcd
sr_mod 13796 0
yenta_socket 21516 4
rsrc_nonstatic 8544 1 yenta_socket
pcmcia 28180 4
pcmcia_core 32752 3 yenta_socket,rsrc_nonstatic,pcmcia
firmware_class 7264 1 pcmcia
e100 28452 0
videodev 6688 0
dm_mod 46584 20
i2c_algo_bit 7912 0
i2c_core 15600 2 i2c_piix4,i2c_algo_bit
loop 11976 0
crc32c 1664 0
libcrc32c 2368 1 crc32c
apm 17224 2
|
Kernel is 2.6.17-gentoo-r8.
_________________
Achille Talon Hop! |
|
| Back to top |
|
|
AchilleTalon
Guru
Joined: 11 Apr 2004
Posts: 368
Location: Montreal, Quebec, Canada
|
| Posted: Mon Oct 09, 2006 5:35 pm Post subject: Solved |
|
|
Hardware problem.
_________________
Achille Talon Hop! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
