View previous topic :: View next topic |
Author |
Message |
mmoscosa Apprentice
Joined: 25 Feb 2005 Posts: 153 Location: Guadalajara Mexico
|
Posted: Tue Oct 24, 2006 4:06 am Post subject: [solved] Xorg troubleshoot |
|
|
hello, hope i dont get nagged this time hehhe but i am having problems with my xconf
one problem it says is that it does not find the mouse driver, and the other is that it doesnt seem to recognize my videocard, suposedly i emerged Nvidia Drivers ok but it says that.
my Nvidia card is a 7950 GT 512 MB, I didnt find it on the xorg xonfig wiz section but i putted generic nvidia driver.. should I change this or what?!
Code: | # File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "latam"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mice"
Option "Protocol" "NetScrollPS/2" # NetScroll PS/2
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# **********************************************************************
# Graphics device section
# **************# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
#********************************************************
Section "Device"
Identifier "** NVIDIA (generic) [nv]"
Driver "nv"
#VideoRam 524288
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** NVIDIA (generic) [nv]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection Option "AddARGBGLXVisuals" "true"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
I know is a bit long but is all I have
if you need the log section.. tell me I will post ti
thx for your help _________________ Martin Moscosa
--------------------------
AMD 64 X2 4600+
1GB (512x2) DDR2 XMMS Corsair
512MB Nvidia 7950 GT
250GB SATA 2 HD
Gigabyte Nforce4 Mobo
Last edited by mmoscosa on Tue Oct 24, 2006 5:25 am; edited 2 times in total |
|
Back to top |
|
|
papal_authority Veteran
Joined: 31 Mar 2004 Posts: 1823 Location: Canada
|
Posted: Tue Oct 24, 2006 4:20 am Post subject: |
|
|
Well one thing to do would be to get rid of the "********************************************************" line by itself. Then try again, if it fails then post the log, or at least the last chunk where it fails. _________________ The free market gave me gonorrhea. |
|
Back to top |
|
|
mmoscosa Apprentice
Joined: 25 Feb 2005 Posts: 153 Location: Guadalajara Mexico
|
Posted: Tue Oct 24, 2006 4:37 am Post subject: |
|
|
this is the error that xorgcfg gives me
Code: | X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.17-gentoo-r7 x86_64
Current Operating System: Linux livecd 2.6.17-gentoo-r7 #1 SMP Tue Aug 29 01:30:07 UTC 2006 x86_64
Build Date: 22 October 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Mon Oct 23 18:33:56 2006
(++) Using config file: "/root/xorg.conf.new"
FATAL: Could not load /lib/modules/2.6.17-gentoo-r7/modules.dep: No such file or directory
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Cannot connect to X server.
|
is this ok?! or do you need more info?! where could I gett his.. the /var/log/Xorg.0.log is really long.. do you want me to post it all/1 _________________ Martin Moscosa
--------------------------
AMD 64 X2 4600+
1GB (512x2) DDR2 XMMS Corsair
512MB Nvidia 7950 GT
250GB SATA 2 HD
Gigabyte Nforce4 Mobo |
|
Back to top |
|
|
papal_authority Veteran
Joined: 31 Mar 2004 Posts: 1823 Location: Canada
|
Posted: Tue Oct 24, 2006 4:45 am Post subject: |
|
|
That's odd, I though you were using the nv driver rather then the propietary nvidia module? That's what the xorg.conf you posted says anyways... _________________ The free market gave me gonorrhea. |
|
Back to top |
|
|
mmoscosa Apprentice
Joined: 25 Feb 2005 Posts: 153 Location: Guadalajara Mexico
|
Posted: Tue Oct 24, 2006 4:48 am Post subject: |
|
|
I did:
Code: | # emerge -uva nvidia-drivers |
and on my kernel i have nothing with nvidia selected (because i had a problem earlier and had to disable it)
maybe i did something wrong in the xorgconifg?! should I change something?! to my xorg.conf or to my kernel?! _________________ Martin Moscosa
--------------------------
AMD 64 X2 4600+
1GB (512x2) DDR2 XMMS Corsair
512MB Nvidia 7950 GT
250GB SATA 2 HD
Gigabyte Nforce4 Mobo |
|
Back to top |
|
|
papal_authority Veteran
Joined: 31 Mar 2004 Posts: 1823 Location: Canada
|
Posted: Tue Oct 24, 2006 5:02 am Post subject: |
|
|
Ok, erase your previous /etc/X11/xorg.conf and replace with this working one:
Code: | Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "My Keyboard"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "latam"
EndSection
Section "InputDevice"
Identifier "My Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 31.5 - 57.0
VertRefresh 50-90
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "My Card"
Driver "nv"
EndSection
Section "Screen"
Identifier "My Screen"
Device "My Card"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "My Screen"
InputDevice "My Mouse" "CorePointer"
InputDevice "My Keyboard" "CoreKeyboard"
EndSection |
_________________ The free market gave me gonorrhea. |
|
Back to top |
|
|
mmoscosa Apprentice
Joined: 25 Feb 2005 Posts: 153 Location: Guadalajara Mexico
|
Posted: Tue Oct 24, 2006 5:24 am Post subject: |
|
|
yaaaaay, I fix it... it didnt worked how you posted but hx anyway... i had to move somethings to the monitor section.. i had to top the resolution to 1024x768
thx a lot _________________ Martin Moscosa
--------------------------
AMD 64 X2 4600+
1GB (512x2) DDR2 XMMS Corsair
512MB Nvidia 7950 GT
250GB SATA 2 HD
Gigabyte Nforce4 Mobo |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|