| View previous topic :: View next topic |
| Author |
Message |
migel
n00b
Joined: 01 Sep 2006
Posts: 24
|
 Posted: Fri Nov 03, 2006 12:40 pm Post subject: Can not switch to 1280x1024 |
 |
|
Dears,
I use gnome with i810 on my laptop and resolution 1024x768. I also have external monitor with 1280x1024.
In the gnome screen resolution I can switch to 640x480 or 800x600 or 1024x768. But can't to 1280x1024.
In xorg.conf I added 1280x1024 for all depths.
Help to set up switching to 1280x1024.
Thanks in advance.
This is my xorg.conf :
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe
Load "dri"
Load "freetype"
Load "type1"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:alt_shift_toggle, grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "TouchPad"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mouse1"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "130"
Option "MaxTapMove" "5"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "40"
Option "MinSpeed" "0.4"
Option "MaxSpeed" "0.95"
Option "AccelFactor" "0.035"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CurcularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "7"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "LockedDrops" "1"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "My monitor"
HorizSync 31.5 - 100.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Intel Corporation"
BoardName "82852/855GM Integrated Graphics Device"
Driver "vga"
EndSection
Section "Device"
Identifier "Intel i810"
Driver "i810"
VideoRam 65536
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Intel i810"
Monitor "My monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# Section "DRI"
# Mode 0666
# EndSection |
|
| Back to top |
|
 |
anime-otaku
Apprentice
Joined: 24 Apr 2006
Posts: 181
Location: Germany
|
| Posted: Fri Nov 03, 2006 12:45 pm Post subject: |
|
|
What does the /var/log/Xorg* say?
_________________
Gentoo compiles you to heaven
There are 10 kinds of people. Those who understands BINARY and those who don't.
Answer the unanswered posts |
|
| Back to top |
|
|
migel
n00b
Joined: 01 Sep 2006
Posts: 24
|
| Posted: Fri Nov 03, 2006 1:12 pm Post subject: |
|
|
| anime-otaku wrote: | | What does the /var/log/Xorg* say? |
Thanks for quick answer.
It's a part of my Xorg.0.log
[32] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 1 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 855GME
(--) I810(0): Chipset: "852GM/855GM"
(--) I810(0): Linear framebuffer at 0xD8000000
(--) I810(0): IO registers at addr 0xD0000000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 8060 kB stolen memory.
(II) I810(0): Kernel reported 208896 total, 1 used
(II) I810(0): I830CheckAvailableMemory: 835580 kB available
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 8060 kByte
(**) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 3360
(II) I810(0): Using new Pipe switch code
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,2317)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: TRUE, size: (1627,0)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,2317)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2317)
(II) I810(0): Size of device LFP (local flat panel) is 1024 x 768
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1024 x 768
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1024x768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: SNY Model: 2770 Serial#: 16843009
(II) I810(0): Year: 2004 Week: 11
(II) I810(0): EDID Version: 1.3
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) I810(0): Sync: Separate Composite SyncOnGreen
(II) I810(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) I810(0): Gamma: 2.20
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) I810(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1280x1024@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 108.0 MHz Image Size: 359 x 287 mm
(II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) I810(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) I810(0): Ranges: V min: 57 V max: 75 Hz, H min: 28 H max: 65 kHz, PixClock max 110 MHz
(II) I810(0): Monitor name: SDM-S73
(II) I810(0): Serial No: 9927586
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte
(II) I810(0): Using detected DDC timings
(II) I810(0): HorizSync 28-65
(II) I810(0): VertRefresh 57-75
(WW) I810(0): config file hsync range 31.5-100kHz not within DDC hsync range 28-65kHz
(WW) I810(0): config file vrefresh range 50-160Hz not within DDC vrefresh range 57-75Hz
Mode: 30 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
