[SOLVED] Dhcpcd issue

[obender]

I updated world recently, and now, when the system boots, once it gets to starting eth0 with dhcp, it outputs the following information and just hangs there.
parseDhcpMsgRecv: 6 options received:
i=1 len=4 option = 255.255.255.0
i=3 len=4 option = 192.168.1.1
i=6 len=12 option = 71.15.32.8
i=6 len=12 option = 24.196.223.8
i=6 len=12 option = 24.196.215.8
i=51 len=4 option = 86400
i=53 len=1 option = 5
i=54 len=4 option = 192.168.1.1
DhcpMsgRecv->yiaddr = 192.168.1.100
DhcpMsgRecv->siaddr = 0.0.0.0
DhcpMsgRecv->giaddr = 0.0.0.0
DhcpMsgRecv->sname = ""
ServerHardwareAddr = xx.xx.xx.xx.xx.xx <- MAC address removed by me

I tried to use interactive boot mode and skip net.eth0, which boots up the system just fine. I then ran

[obender]

re-merging dhcpcd with USE=-debug solved the problem

[yabbadabbadont]

It's good that you posted your solution for others. Thank you.

Don't forget to edit the subject of your first post to include the word, SOLVED.

Have fun with Gentoo.
_________________