2.6.18-r2,x86_64,ati-driv-8.30.3-r1 X doesn t start at all

[terminou]

Hello

i have a fresh Gentoo for AMD64 installed with all latest version available but i'm not able to start kde not X server

Here are some infos about my config (the hardware is a radeon X800XL on AGP bus)

X 7.1.1, kernel 2.6.18-r2 x86_64,ati-drivers-8.30.3-r1, GCC 4.1.1

i have the following message after doing Xorg -configure (also for X -configure)

Hell ~ # Xorg -configure

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux Hell 2.6.18-gentoo-r2 #5 Sat Nov 11 18:10:32 Local time zone must be set--see zic manu x86_64
Build Date: 10 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 12 21:02:27 2006
List of video drivers:
ark
tseng
fglrx
v4l
s3virge
vmware
nv
neomagic
i128
siliconmotion
dummy
apm
i810
trident
cirrus
mga
sisusb
savage
chips
via
voodoo
rendition
tga
s3
cyrix
tdfx
glint
sis
fbdev
vesa
vga

Backtrace:
0: Xorg(xf86SigHandler+0x71) [0x480111]
1: /lib/tls/libc.so.6 [0x2b74191737f0]
2: /lib/tls/libc.so.6(memcpy+0x42) [0x2b74191b83f2]
3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so(atiddxProbeMain+0xec) [0x2b74199bc81c]
4: Xorg(DoConfigure+0x1f5) [0x473085]
5: Xorg(InitOutput+0x675) [0x45f3a5]
6: Xorg(main+0x26f) [0x430ddf]
7: /lib/tls/libc.so.6(__libc_start_main+0xf4) [0x2b7419161374]
8: Xorg(FontFileCompleteXLFD+0xa1) [0x4302b9]

Fatal server error:
Caught signal 11. Server aborting

Aborted



Hell ~ # cat /etc/make.conf
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-march=athlon64 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
ACCEPT_KEYWORDS="~amd64"
FEATURES="ccache"
CCACHE_DIR="/var/tmp/ccache/"
CCACHE_SIZE="2G"
USE="X pdf"
INPUT_DEVICE="keyboard mouse"
VIDEO_CARDS="fglrx radeon"
Hell ~ #



and

Hell ~ # cat /var/log/Xorg.0.log

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux Hell 2.6.18-gentoo-r2 #5 Sat Nov 11 18:10:32 Local time zone must be set--see zic manu x86_64
Build Date: 10 November 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 12 21:02:27 2006
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 10de,0c11 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 10de,0c11 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 10de,0c11 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 10de,0c11 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:08:0: chip 10de,00e5 card 10de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,554d card 1458,2124 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,556d card 1458,2125 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:07:0: chip 1095,0680 card 1095,3680 rev 02 class 01,04,00 hdr 00
(II) PCI: 02:08:0: chip 1814,0201 card 1681,0050 rev 01 class 02,80,00 hdr 00
(II) PCI: 02:0a:0: chip 1102,0008 card 1102,1021 rev 00 class 04,01,00 hdr 00
(II) PCI: 02:0b:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00
(II) PCI: 02:0c:0: chip 1095,3114 card 1095,6114 rev 02 class 01,04,00 hdr 00
(II) PCI: 02:0d:0: chip 14e4,169c card 14e4,969c rev 03 class 02,00,00 hdr 00
(II) PCI: 02:0f:0: chip 1412,1724 card 270f,f645 rev 01 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0200 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) rev 0, Mem @ 0xe0000000/28, 0xfdef0000/16, I/O @ 0xef00/8
(--) PCI: (1:0:1) ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) Secondary rev 0, Mem @ 0xfdee0000/16
List of video drivers:
ark
tseng
fglrx
v4l
s3virge
vmware
nv
neomagic
i128
siliconmotion
dummy
apm
i810
trident
cirrus
mga
sisusb
savage
chips
via
voodoo
rendition
tga
s3
cyrix
tdfx
glint
sis
fbdev
vesa
vga
(II) LoadModule: "ark"
(II) Loading /usr/lib64/xorg/modules/drivers/ark_drv.so
(II) Module ark: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.6.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "tseng"
(II) Loading /usr/lib64/xorg/modules/drivers/tseng_drv.so
(II) Module tseng: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.30.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "v4l"
(II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.1
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "s3virge"
(II) Loading /usr/lib64/xorg/modules/drivers/s3virge_drv.so
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "vmware"
(II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 10.14.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "nv"
(II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "neomagic"
(II) Loading /usr/lib64/xorg/modules/drivers/neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "i128"
(II) Loading /usr/lib64/xorg/modules/drivers/i128_drv.so
(II) Module i128: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib64/xorg/modules/drivers/siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dummy"
(II) Loading /usr/lib64/xorg/modules/drivers/dummy_drv.so
(II) Module dummy: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "apm"
(II) Loading /usr/lib64/xorg/modules/drivers/apm_drv.so
(II) Module apm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "i810"
(II) Loading /usr/lib64/xorg/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.7.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "trident"
(II) Loading /usr/lib64/xorg/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "cirrus"
(II) Loading /usr/lib64/xorg/modules/drivers/cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mga"
(II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.4.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "sisusb"
(II) Loading /usr/lib64/xorg/modules/drivers/sisusb_drv.so
(II) Module sisusb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "savage"
(II) Loading /usr/lib64/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 2.1.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "chips"
(II) Loading /usr/lib64/xorg/modules/drivers/chips_drv.so
(II) Module chips: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "via"
(II) Loading /usr/lib64/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "voodoo"
(II) Loading /usr/lib64/xorg/modules/drivers/voodoo_drv.so
(II) Module voodoo: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "rendition"
(II) Loading /usr/lib64/xorg/modules/drivers/rendition_drv.so
(II) Module rendition: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "tga"
(II) Loading /usr/lib64/xorg/modules/drivers/tga_drv.so
(II) Module tga: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "s3"
(II) Loading /usr/lib64/xorg/modules/drivers/s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "cyrix"
(II) Loading /usr/lib64/xorg/modules/drivers/cyrix_drv.so
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "tdfx"
(II) Loading /usr/lib64/xorg/modules/drivers/tdfx_drv.so
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "glint"
(II) Loading /usr/lib64/xorg/modules/drivers/glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "sis"
(II) Loading /usr/lib64/xorg/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.3.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "vga"
(II) Loading /usr/lib64/xorg/modules/drivers/vga_drv.so
(II) Module vga: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfdde0000 - 0xfddeffff (0x10000) MX[B]
[1] -1 0 0xfddfd000 - 0xfddfd3ff (0x400) MX[B]
[2] -1 0 0xfddfe000 - 0xfddfe7ff (0x800) MX[B]
[3] -1 0 0xfddfa000 - 0xfddfbfff (0x2000) MX[B]
[4] -1 0 0xfddff000 - 0xfddff0ff (0x100) MX[B]
[5] -1 0 0xfdffd000 - 0xfdffd0ff (0x100) MX[B]
[6] -1 0 0xfdffe000 - 0xfdffefff (0x1000) MX[B]
[7] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B]
[8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[9] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[11] -1 0 0x0000d200 - 0x0000d27f (0x80) IX[B]
[12] -1 0 0x0000d300 - 0x0000d31f (0x20) IX[B]
[13] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[14] -1 0 0x0000d500 - 0x0000d503 (0x4) IX[B]
[15] -1 0 0x0000d600 - 0x0000d607 (0x8) IX[B]
[16] -1 0 0x0000d700 - 0x0000d703 (0x4) IX[B]
[17] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[18] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[B]
[19] -1 0 0x0000da00 - 0x0000da3f (0x40) IX[B]
[20] -1 0 0x0000db00 - 0x0000db0f (0x10) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[22] -1 0 0x0000dd00 - 0x0000dd07 (0x8) IX[B]
[23] -1 0 0x0000de00 - 0x0000de03 (0x4) IX[B]
[24] -1 0 0x0000df00 - 0x0000df07 (0x8) IX[B]
[25] -1 0 0x0000f700 - 0x0000f70f (0x10) IX[B]
[26] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[27] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[28] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[29] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdde0000 - 0xfddeffff (0x10000) MX[B]
[1] -1 0 0xfddfd000 - 0xfddfd3ff (0x400) MX[B]
[2] -1 0 0xfddfe000 - 0xfddfe7ff (0x800) MX[B]
[3] -1 0 0xfddfa000 - 0xfddfbfff (0x2000) MX[B]
[4] -1 0 0xfddff000 - 0xfddff0ff (0x100) MX[B]
[5] -1 0 0xfdffd000 - 0xfdffd0ff (0x100) MX[B]
[6] -1 0 0xfdffe000 - 0xfdffefff (0x1000) MX[B]
[7] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B]
[8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[9] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[11] -1 0 0x0000d200 - 0x0000d27f (0x80) IX[B]
[12] -1 0 0x0000d300 - 0x0000d31f (0x20) IX[B]
[13] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[14] -1 0 0x0000d500 - 0x0000d503 (0x4) IX[B]
[15] -1 0 0x0000d600 - 0x0000d607 (0x8) IX[B]
[16] -1 0 0x0000d700 - 0x0000d703 (0x4) IX[B]
[17] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[18] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[B]
[19] -1 0 0x0000da00 - 0x0000da3f (0x40) IX[B]
[20] -1 0 0x0000db00 - 0x0000db0f (0x10) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[22] -1 0 0x0000dd00 - 0x0000dd07 (0x8) IX[B]
[23] -1 0 0x0000de00 - 0x0000de03 (0x4) IX[B]
[24] -1 0 0x0000df00 - 0x0000df07 (0x8) IX[B]
[25] -1 0 0x0000f700 - 0x0000f70f (0x10) IX[B]
[26] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[27] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[28] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[29] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfdde0000 - 0xfddeffff (0x10000) MX[B]
[5] -1 0 0xfddfd000 - 0xfddfd3ff (0x400) MX[B]
[6] -1 0 0xfddfe000 - 0xfddfe7ff (0x800) MX[B]
[7] -1 0 0xfddfa000 - 0xfddfbfff (0x2000) MX[B]
[8] -1 0 0xfddff000 - 0xfddff0ff (0x100) MX[B]
[9] -1 0 0xfdffd000 - 0xfdffd0ff (0x100) MX[B]
[10] -1 0 0xfdffe000 - 0xfdffefff (0x1000) MX[B]
[11] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B]
[12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000d200 - 0x0000d27f (0x80) IX[B]
[19] -1 0 0x0000d300 - 0x0000d31f (0x20) IX[B]
[20] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[21] -1 0 0x0000d500 - 0x0000d503 (0x4) IX[B]
[22] -1 0 0x0000d600 - 0x0000d607 (0x8) IX[B]
[23] -1 0 0x0000d700 - 0x0000d703 (0x4) IX[B]
[24] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[25] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[B]
[26] -1 0 0x0000da00 - 0x0000da3f (0x40) IX[B]
[27] -1 0 0x0000db00 - 0x0000db0f (0x10) IX[B]
[28] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[29] -1 0 0x0000dd00 - 0x0000dd07 (0x8) IX[B]
[30] -1 0 0x0000de00 - 0x0000de03 (0x4) IX[B]
[31] -1 0 0x0000df00 - 0x0000df07 (0x8) IX[B]
[32] -1 0 0x0000f700 - 0x0000f70f (0x10) IX[B]
[33] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[34] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[35] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[36] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:53
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518

Backtrace:
0: Xorg(xf86SigHandler+0x71) [0x480111]
1: /lib/tls/libc.so.6 [0x2b74191737f0]
2: /lib/tls/libc.so.6(memcpy+0x42) [0x2b74191b83f2]
3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so(atiddxProbeMain+0xec) [0x2b74199bc81c]
4: Xorg(DoConfigure+0x1f5) [0x473085]
5: Xorg(InitOutput+0x675) [0x45f3a5]
6: Xorg(main+0x26f) [0x430ddf]
7: /lib/tls/libc.so.6(__libc_start_main+0xf4) [0x2b7419161374]
8: Xorg(FontFileCompleteXLFD+0xa1) [0x4302b9]

Fatal server error:
Caught signal 11. Server aborting

Hell ~ #



What is the problem ? i have followed the Ati Faq ....

[terminou]

UP

[terminou]

Is somebody has same patch level ?

[YetiBarBar]

Xorg --configure don't work with my ati

Why not try ati config utility ?

[terminou]

because i have the same result too

[YetiBarBar]

Can you post your xorg.conf?

[loki_val]

I had the same problem. Club3d Radeon X800 AGP. I was migrating from a Ubuntu installation when I installed Gentoo, so I just copied the xorg.conf from that, which worked. Below is my xorg.conf. It is configured for the fglrx ati proprietary drivers, but it works for me if I just replace fglrx with vesa.You might have to read up on how to configure your screen too, since this is configured for my Samsung Syncmaster 913N. Also, you might not have all the fonts that are present here. Remove as necessary.

[terminou]

i don't have it... probably i remove it

[YetiBarBar]

So you can try :

[terminou]

i don't kno why but when i boot my PC the screen stay blank. via SSH i can see a process X using 100% of cpu. then i have no choice to kill -9 the process and do the /etc/init.d/xdm restart to have the X server running.

Doing a glxgear give an average of 250 fps while fglrxinfog display ATI radeon drivers

[terminou]

what i don't understand is the following

when i type

Hell ~ # aticonfig --initial -f --input=/etc/X11/xorg.conf
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-6
Hell ~ #

then the xorg.cong contains


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
# local font server
# if the local font server has problems, we can fall back on these
# paths to defoma fonts
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "10"
Option "ZAxisMapping" "9 10"
Option "Resolution" "800"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection


when i reboot my PC it is like i described before.
why?
and why i have such section? what to do after a aticonfig --initial ?

[YetiBarBar]

[terminou]

what is very funny with what you asked to do is the following

Hell ~ # rm /etc/X11/xorg.conf*
Hell ~ # aticonfig --initial
Warning: Could not find configuration file
Please copy configuration file template to /etc/X11
Hell ~ #


Aticonfig --initial works only when you have already a xorg.conf file already set.

[YetiBarBar]

[terminou]

still the same problem wit the CPU usage after a reboot

8900 root 25 0 47188 7328 5524 R 99.9 0.4 2:06.56 X
1 root 18 0 2668 588 496 S 0.0 0.0 0:00.90 init

Hell ~ # /etc/init.d/xdm stop
* Stopping kdm ...
* Error stopping kdm. [ !! ]

Hell ~ # kill -9 8900
Hell ~ # /etc/init.d/xdm restart
* Stopping ... [ ok ]
* Setting up kdm ... [ ok ]


and now i have gdm working fine after doing the previous commands


new xorg.conf

[terminou]

The log

[adlaiff6]

Do you have anything like folding@home that would be eating up CPU cycles?

I think (someone correct me if i'm wrong) that your card should work with the open source (radeon) drivers. Have you tried that?

All aticonfig checks is that the Device section has "Driver \"fglrx\"" in it, and that that driver is being used for the Screen you want (as far as I know). xorgconfig should generate a good xorg.conf, did you "cp /root/xorg.conf.new /etc/X11/xorg.conf"?

I'll check again, and against my own xorg.conf etc. when I get back home.

[terminou]

[adlaiff6]

I would suggest running xorgconfig, which I believe gives you a CLI series of menus where you tell it all about your system, and it generates a file /root/xorg.conf.new, which you can then check over, and copy to /etc/X11/xorg.conf if it suits you. I would try that, and if it doesn't work, try using aticonfig to modify it. Make sure you cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak first.

Also, give the open source drivers a shot. If they work with your card, there's probably much better support for them than the proprietary drivers.

[terminou]

is somebody can explain to me the following please?

When my PC finish to boot it loads xdm
My screen has the orange light and via an other PC i open a ssh session

i see a X process who takes 100% of CPU usage

I kill the process manuall via the remote PC and the XDM start and i have the login screen working fine.

My question : Why ? what the process X is doing ?

HELL ~ # top
top - 13:28:45 up 1 min, 1 user, load average: 1.93, 0.77, 0.28
Tasks: 56 total, 3 running, 53 sleeping, 0 stopped, 0 zombie
Cpu(s): 71.3%us, 9.0%sy, 1.0%ni, 11.1%id, 7.5%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2059184k total, 71404k used, 1987780k free, 2700k buffers
Swap: 1004052k total, 0k used, 1004052k free, 32040k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9177 root 25 0 47304 7328 5528 R 98.1 0.4 0:59.00 X
9480 foldinga 35 19 11504 4948 1392 R 2.0 0.2 0:00.64 FahCore_78.exe
1 root 18 0 2672 584 496 S 0.0 0.0 0:00.86 init
2 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
3 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
4 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 events/0
5 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper
6 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthread
9 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0
10 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid
138 root 16 -5 0 0 0 S 0.0 0.0 0:00.02 kseriod
141 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 khubd
218 root 25 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
219 root 15 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
220 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd0
221 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0
223 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 jfsIO
224 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 jfsCommit
225 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 jfsSync
319 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused
371 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khpsbpkt
375 root 15 0 0 0 0 S 0.0 0.0 0:00.00 knodemgrd_0
413 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
414 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 usb-storage
1039 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0
1040 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 ata_aux
1107 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
1108 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
1109 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
1110 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
2173 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald
3168 root 20 -4 7172 796 372 S 0.0 0.0 0:00.82 udevd
6904 root 18 0 2692 248 152 S 0.0 0.0 0:00.00 dhcpcd
7702 root 15 0 7184 632 428 S 0.0 0.0 0:00.00 syslog-ng
8927 messageb 18 0 8404 812 632 S 0.0 0.0 0:00.00 dbus-daemon
8997 haldaemo 15 0 19180 3984 1700 S 0.0 0.2 0:00.34 hald
8998 root 25 0 11288 1160 968 S 0.0 0.1 0:00.00 hald-runner
HELL ~ # ps X
PID STACKP ESP EIP TMOUT ALARM STAT TTY TIME COMMAND
9177 5f850000 ffffffff 4cb69af2 - - Rs+ tty7 1:03 /usr/bin/X :0 vt7 -auth /etc/X11/xdm/authdir/authfiles/A:0-
9445 348ba640 ffffffff 763ba9d0 - - Ss+ tty1 0:00 /sbin/agetty 38400 tty1 linux
9446 9b07fe00 ffffffff 0fbf69d0 - - Ss+ tty2 0:00 /sbin/agetty 38400 tty2 linux
9447 546d7460 ffffffff 5659d9d0 - - Ss+ tty3 0:00 /sbin/agetty 38400 tty3 linux
9448 de0f3e70 ffffffff ccb809d0 - - Ss+ tty4 0:00 /sbin/agetty 38400 tty4 linux
9449 3d9686f0 ffffffff 6d30e9d0 - - Ss+ tty5 0:00 /sbin/agetty 38400 tty5 linux
9470 cb5f7380 ffffffff df67f9d0 - - Ss+ tty6 0:00 /sbin/agetty 38400 tty6 linux
9488 7ac569e0 ffffffff 3025d105 - - Ss pts/0 0:00 -bash
9492 f0eb7740 ffffffff b9edf9d0 - - R+ pts/0 0:00 ps X


Here is again my xorg.conf file
HELL ~ # cat /etc/X11/xorg.conf

# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
#Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
# Identifier "** ATI Radeon (generic) [radeon]"
# Driver "radeon"
#EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
# FontPath "/usr/share/fonts/CID/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# Load "speedo"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "dri"
Load "glx"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "fr"
Option "XkbVariant" "fr"
EndSection

Section "InputDevice"

# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2" # PS/2 Mouse
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

other question : My MX510 mouse doesn't have the scroll button working too. i saw some post saying to have

Option "ZAxisMapping" "4 5" but i have Option "ZAxisMapping" "4 5 6 7"

Also when i shutdown my pc i should go back to VGA mode i presume and you should see all process shutting down and me i have my screen black with orange light (like starting xdm)


i'm quite sure something is not correct but we are close of the solution.
Can you assist please?

[terminou]

when the Session is working i see the following

HELL ~ # ps X
PID STACKP ESP EIP TMOUT ALARM STAT TTY TIME COMMAND
9448 660bee40 ffffffff 44bb59d0 - - Ss+ tty1 0:00 /sbin/agetty 38400 tty1 linux
9449 0f37ca80 ffffffff 9b8fa9d0 - - Ss+ tty2 0:00 /sbin/agetty 38400 tty2 linux
9450 746a6430 ffffffff 365ce9d0 - - Ss+ tty3 0:00 /sbin/agetty 38400 tty3 linux
9451 caa387c0 ffffffff e023c9d0 - - Ss+ tty4 0:00 /sbin/agetty 38400 tty4 linux
9452 0a76f4f0 ffffffff a05059d0 - - Ss+ tty5 0:00 /sbin/agetty 38400 tty5 linux
9473 bb088e10 ffffffff efbed9d0 - - Ss+ tty6 0:00 /sbin/agetty 38400 tty6 linux
9491 5a907690 ffffffff 505ac105 - - Ss pts/0 0:00 -bash
9497 6ca77220 ffffffff 3eca0403 - - SLs+ tty7 0:10 /usr/bin/X :0 vt7 -auth /etc/X11/xdm/authdir/authfiles/A:0-
9562 42d5f5d0 ffffffff 681749d0 - - Ss+ pts/1 0:00 bash
9565 26ce0570 ffffffff 840b69d0 - - R+ pts/0 0:00 ps X

the STAT is different now

[darkangel92]

i have same problem. sorry i can't help

[dmpogo]

2.6.18-r2 on amd64 platform forces kernel side AGP to be built in.
Does ATI driver require it off ? (I'm on nvidia, so just guessing)