| View previous topic :: View next topic |
| Author |
Message |
My_World
Guru
Joined: 01 Sep 2003
Posts: 339
Location: Kalahari Desert
|
 Posted: Wed Nov 22, 2006 4:34 pm Post subject: [SOLVED] SATA DVD-RW problems |
 |
|
I have the following problem with my SATA DVD-RW drive.
It fails to read any CD or DVD and if I dmesg I get the following output:
| Code: |
sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x0 00 00 00 00 00 00
sr: Current: sense key=0x4
ASC=0x8 ASCQ=0x4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
sr 2:0:0:0: ioctl_internal_command return code = 8000002
: Current: sense key=0x4
ASC=0x8 ASCQ=0x4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: (BMDMA stat 0x0)
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x20 (device error)
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: (BMDMA stat 0x0)
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: (BMDMA stat 0x0)
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x43 43 00 00 00 00 00 00 00 0c 00
sr: Current: sense key=0x4
ASC=0x8 ASCQ=0x4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: (BMDMA stat 0x0)
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: (BMDMA stat 0x0)
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
ata3: EH complete
sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x0 00 00 00 00 00 00
sr: Current: sense key=0x4
ASC=0x8 ASCQ=0x4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x0
ata3.00: tag 0 cmd 0xa0 Emask 0x1 stat 0x51 err 0x40 (device error)
|
The thing that really creaps me out is that ther error keep on repeating! By this I mean if I do the follwoing:
| Code: |
tail -f /var/log/messages
|
the message keeps on producing itself without stopping.
| Code: |
Nov 22 18:38:31 my kernel: ata3: EH complete
Nov 22 18:38:31 my kernel: sr 2:0:0:0: ioctl_internal_command return code = 8000002
Nov 22 18:38:31 my kernel: : Current: sense key=0x4
Nov 22 18:38:31 my kernel: ASC=0x8 ASCQ=0x4
Nov 22 18:38:33 my kernel: ata3: EH complete
Nov 22 18:38:33 my kernel: sr: Current: sense key=0x4
Nov 22 18:38:33 my kernel: ASC=0x8 ASCQ=0x4
Nov 22 18:38:35 my kernel: sr: Current: sense key=0x4
Nov 22 18:38:35 my kernel: ASC=0x8 ASCQ=0x4
Nov 22 18:38:35 my kernel: sr 2:0:0:0: ioctl_internal_command return code = 8000002
Nov 22 18:38:35 my kernel: : Current: sense key=0x4
Nov 22 18:38:35 my kernel: ASC=0x8 ASCQ=0x4
Nov 22 18:38:37 my kernel: ata3: EH complete
Nov 22 18:38:38 my last message repeated 3 times
Nov 22 18:38:38 my kernel: sr: Current: sense key=0x4
Nov 22 18:38:38 my kernel: ASC=0x8 ASCQ=0x4
Nov 22 18:38:38 my kernel: ata3: EH complete
|
I have a SATA only system, no IDE devices with /dev/sda & /dev/sdb as a RAID0 setup.
I'm not sure what is going on here, so if any more info is needed then just shout.
_________________
"Ubuntu" - an African word meaning "Gentoo is too hard for me".
Last edited by My_World on Thu Nov 23, 2006 8:16 pm; edited 1 time in total |
|
| Back to top |
|
 |
My_World
Guru
Joined: 01 Sep 2003
Posts: 339
Location: Kalahari Desert
|
| Posted: Thu Nov 23, 2006 1:59 pm Post subject: |
|
|
No one with even an idea where I should look or start troubleshooting?
_________________
"Ubuntu" - an African word meaning "Gentoo is too hard for me". |
|
| Back to top |
|
|
Jjeje007
Tux's lil' helper
Joined: 29 Sep 2006
Posts: 142
Location: France, La Croix Valmer
|
| Posted: Thu Nov 23, 2006 3:17 pm Post subject: |
|
|
Hi,
I just setup my sata dvd-r player (plextor PX-760SA) and it's working fine
Here is my kernel config for the sata dvd-r player :
| Code: | Device Drivers ----> ATA/ATAPI/MFM/RLL support ----> [] (nothing)
----> SCSI Device support ----> <*> SCSI Disk support
<*> SCSI CDROM support
<*> SCSI generic support
-----> Serial ATA (prod) and parallel ATA (experimental) support ----> <*> ATA device support
<*> Pickup your chipset driver
< > Generic ATA support (don't if it's good to disable this but working fine without this enable)
|
After just need to add this | Quote: | | libata.atapi_enabled=1 |
in the grub.conf, for exemple :
| Quote: | title=Gentoo-Linux 2.6.19
root (hd0,1)
kernel /vmlinuz ro root=/dev/sdb3 libata.atapi_enabled=1 "irqpoll" video=vesafb:ywrap,mtrr:3 vga=0x318 |
I'm Running kernel 2.6.19-rc5, asus P5W DH Deluxe, sata hardware Raid0, sata dvd-r player, scsi harddrive
Hope this help you
See you and good luck
Jjeje007 |
|
| Back to top |
|
|
My_World
Guru
Joined: 01 Sep 2003
Posts: 339
Location: Kalahari Desert
|
| Posted: Thu Nov 23, 2006 3:52 pm Post subject: |
|
|
Thank you for the reply, will try it out asap and report back!
_________________
"Ubuntu" - an African word meaning "Gentoo is too hard for me". |
|
| Back to top |
|
|
My_World
Guru
Joined: 01 Sep 2003
Posts: 339
Location: Kalahari Desert
|
| Posted: Thu Nov 23, 2006 8:17 pm Post subject: |
|
|
All I needed was the libata.atapi_enabled=1 part in my boot loader (lilo) and it seems to be working now!
Thanks again!
_________________
"Ubuntu" - an African word meaning "Gentoo is too hard for me". |
|
| Back to top |
|
|
Paapaa
l33t
Joined: 14 Aug 2005
Posts: 955
Location: Finland
|
| Posted: Thu Nov 23, 2006 8:56 pm Post subject: |
|
|
| Jjeje007 wrote: | Hi,
I just setup my sata dvd-r player (plextor PX-760SA) and it's working fine
Here is my kernel config for the sata dvd-r player :
|
I don't think you need SCSI generic support at all. |
|
| Back to top |
|
|
Jjeje007
Tux's lil' helper
Joined: 29 Sep 2006
Posts: 142
Location: France, La Croix Valmer
|
| Posted: Thu Nov 23, 2006 11:50 pm Post subject: |
|
|
Hi,
| Quote: | ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM PLEXTOR DVDR PX-760A 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5 |
That why i enable scsi CDROM support ... but maybe i don't need ?
Any way i need scsi because i've got an scsi controller card so i will see (Just emerge kernel 2.6.19-rc6 )
See you and good new for you My_World
Jjeje007 |
|
| Back to top |
|
|
Jjeje007
Tux's lil' helper
Joined: 29 Sep 2006
Posts: 142
Location: France, La Croix Valmer
|
| Posted: Sat Nov 25, 2006 11:36 am Post subject: |
|
|
Hi,
Ok You don't need at all to enable :
| Quote: | | <*> SCSI generic support |
I just found if this is enable you will have an device sgX and an device srX point both to your sata dvd player |
|
| Back to top |
|
|
|
Kernel & Hardware
