| View previous topic :: View next topic |
| Author |
Message |
redgsturbo
Apprentice
Joined: 24 Jun 2005
Posts: 283
|
 Posted: Wed Dec 20, 2006 1:37 am Post subject: lm_sensors and abituguru... not working, but.. |
 |
|
Abit NI8 board... lm_sensors refuses to the sensors, rather only identifying the below driver. I've compiled abituguru as a module and as into the kernel with no result. Am I missing something? And why does it not list the CPU temps?
| Code: | w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)
VCore 2: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)
+3.3V: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)
+5V: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM (beep)
+12V: +15.50 V (min = +15.50 V, max = +15.50 V) ALARM (beep)
-12V: +6.06 V (min = +6.06 V, max = +6.06 V) ALARM (beep)
-5V: +5.10 V (min = +5.10 V, max = +5.10 V) ALARM (beep)
V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM (beep)
VBat: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)
fan1: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)
fan2: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)
fan3: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)
temp1: -1 C (high = -1 C, hyst = -1 C) sensor = diode ALARM (beep)
temp2: +0.0 C (high = +0 C, hyst = +0 C) sensor = diode ALARM (beep)
temp3: +0.0 C (high = +0 C, hyst = +0 C) sensor = diode ALARM (beep)
vid: +0.000 V (VRM Version 10.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
|
|
|
| Back to top |
|
 |
Gentree
Watchman
Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe
|
| Posted: Wed Dec 20, 2006 11:30 pm Post subject: |
|
|
it's not the winbond chip you need to use it's the abituguru. rerun sensors-detect. Here's my output.
It's not correct on my new 2.6.19 , but most are there.
| Code: | bash-3.2#sensors
abituguru-isa-00e0
Adapter: ISA adapter
CPU Core Voltage: +1.78 V (min +0.00 V, max +3.49 V)
DDR Voltage: +2.99 V (min +0.00 V, max +3.49 V)
DDR VTT Voltage: +1.71 V (min +0.00 V, max +3.49 V)
NB Voltage: +2.81 V (min +0.00 V, max +3.49 V)
SB Voltage: +2.64 V (min +0.00 V, max +3.49 V)
ERROR: Can't get IN data! (0x0006)
ERROR: Can't get IN data! (0x0007)
ERROR: Can't get IN data! (0x0008)
ERROR: Can't get IN data! (0x0009)
ERROR: Can't get IN data! (0x000a)
ERROR: Can't get IN data! (0x000b)
CPU Temperature: +43°C (high = +77°C, crit = +86°C)
SYS Temperature: +24°C (high = +255°C, crit = +255°C)
ERROR: Can't get TEMP data! (0x0053)
ERROR: Can't get FAN data! (0x0091)
ERROR: Can't get FAN data! (0x0092)
ERROR: Can't get FAN data! (0x0093)
ERROR: Can't get FAN data! (0x0094)
ERROR: Can't get FAN data! (0x0095)
|
_________________
Linux, because I'd rather own a free OS than steal one that's not worth paying for.
Gentoo because I'm a masochist
AthlonXP-M on A7N8X. Portage ~x86 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
