| View previous topic :: View next topic |
| Author |
Message |
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
 Posted: Sat Jan 06, 2007 12:05 pm Post subject: ipw2100 after kernel upgrade not working anymore |
 |
|
Hi,
I've just upgraded from 2.6.18-r1 to 2.6.19-r3 because I hoped that my issues with WPA2/NetworkManager would be solved with this update. NM was unable to connect to my WPA2/CCMP-encrypted network at home as well as somewhere else with 2.6.18-r1, i could however get connected to an TKIP-encrypted network and unencrypted ones.
After upgrading, I got various errors concerning ieee80211 and ipw2100. Now I have ipw2100 compiled as Module (from the kernel) and unmerged the ieee80211 and ipw2100 ebuilds.
NM sees all wireless networks, so the firmware and stuff seems to work, but I can't even connect to an unencrypted network anymore 
the dmesg output concerning wireless: | Code: | ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.2.1
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP' |
this is networkmanager's output if i try to connect to belkin54g (unencrypted): | Code: | Jan 6 12:59:31 otr dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Jan 6 12:59:31 otr NetworkManager: <info> Will activate connection 'eth1/mywpassid'.
Jan 6 12:59:31 otr NetworkManager: <info> Device eth1 activation scheduled...
Jan 6 12:59:31 otr NetworkManager: <info> Deactivating device eth0.
Jan 6 12:59:31 otr dhclient: DHCPRELEASE on eth0 to 192.168.0.1 port 67
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) started...
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1/wireless): access point 'mywpassid' is encrypted, but NO valid key exists. New key needed.
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) New wireless user key requested for network 'mywpassid'.
Jan 6 12:59:32 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1) New wireless user key request for network 'mywpassid' was canceled.
Jan 6 12:59:34 otr NetworkManager: <info> Deactivating device eth1.
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1): cancelling...
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1) cancellation handler scheduled...
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1): waiting for device to cancel activation.
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1) cancellation handled.
Jan 6 12:59:34 otr NetworkManager: <info> Activation (eth1): cancelled.
Jan 6 12:59:37 otr NetworkManager: <debug> [1168088377.245247] nm_device_802_11_wireless_get_activation_ap(): Forcing AP 'belkin54g'
Jan 6 12:59:37 otr NetworkManager: <info> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / belkin54g
Jan 6 12:59:37 otr NetworkManager: <info> Deactivating device eth1.
Jan 6 12:59:37 otr dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Jan 6 12:59:37 otr NetworkManager: <info> Device eth1 activation scheduled...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) started...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1/wireless): access point 'belkin54g' is unencrypted, no key needed.
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was 'OK'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'AP_SCAN 1'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was 'OK'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'ADD_NETWORK'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was '0'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 ssid 62656c6b696e353467'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was 'OK'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was 'OK'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: sending command 'ENABLE_NETWORK 0'
Jan 6 12:59:37 otr NetworkManager: <info> SUP: response was 'OK'
Jan 6 12:59:37 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Jan 6 12:59:57 otr NetworkManager: <info> Activation (eth1/wireless): association took too long (>20s), failing activation.
Jan 6 12:59:57 otr NetworkManager: <info> Activation (eth1) failure scheduled...
Jan 6 12:59:57 otr NetworkManager: <info> Activation (eth1) failed for access point (belkin54g)
Jan 6 12:59:57 otr NetworkManager: <info> Activation (eth1) failed.
Jan 6 12:59:57 otr NetworkManager: <info> Deactivating device eth1. |
so, what could be the problem? I need at least the unencrypted wireless 
Last edited by acheta on Sat Jan 06, 2007 10:29 pm; edited 1 time in total |
|
| Back to top |
|
 |
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Sat Jan 06, 2007 12:26 pm Post subject: Re: ipw2100 w/ 2.6.19-r3 not working anymore |
|
|
one addition: | acheta wrote: | | After upgrading, I got various errors concerning ieee80211 and ipw2100. Now I have ipw2100 compiled as Module (from the kernel) and unmerged the ieee80211 and ipw2100 ebuilds. |
i did this mainly becaus UberLords post here: https://forums.gentoo.org/viewtopic-p-3796838.html#3796838 |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Sat Jan 06, 2007 1:28 pm Post subject: |
|
|
| UberLord wrote: | | Does wpa_supplicant work by itself? IE, don't use NetworkManager. |
no, not really. If I try to start wpa_supplicant manually, it gets EAPOL notifications and authentication fails: | Code: | wpa_supplicant -d -Dwext -ieth1 -c/etc/wpa_supplicant/wpa_supplicant.conf
Initializing interface 'eth1' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
Priority group 1
id=0 ssid='mywpasid'
Priority group 0
id=1 ssid='kobol'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:04:23:74:5b:c0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 2287 bytes of scan results (10 BSSes)
Scan results: 10
Selecting BSS from priority group 1
0: 00:14:bf:a2:6f:fb ssid='mywpasid' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
selected based on RSN IE
Trying to associate with 00:14:bf:a2:6f:fb (SSID='mywpasid' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=16
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:14:bf:a2:6f:fb into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 2283 bytes of scan results (10 BSSes)
Scan results: 10
Selecting BSS from priority group 1
0: 00:14:bf:a2:6f:fb ssid='mywpasid' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
selected based on RSN IE
Trying to associate with 00:14:bf:a2:6f:fb (SSID='mywpasid' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=16
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:14:bf:a2:6f:fb blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 2128 bytes of scan results (9 BSSes)
Scan results: 9
Selecting BSS from priority group 1
0: 00:14:bf:a2:6f:fb ssid='mywpasid' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - blacklisted
1: 00:13:10:3f:47:39 ssid='galactica' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
skip - SSID mismatch
2: 00:15:e9:62:a6:70 ssid='AundK' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
3: 00:c0:49:54:61:f8 ssid='MSHEIMNETZ' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
4: 00:14:6c:ce:31:f4 ssid='anders' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
5: 00:09:5b:72:ff:cc ssid='<hidden>' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
6: 00:11:50:ff:fc:f8 ssid='belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
7: 00:0f:b5:17:d2:d6 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
8: 00:14:6c:79:33:42 ssid='mechitaristen' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:14:bf:a2:6f:fb ssid='mywpasid' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - blacklisted
1: 00:13:10:3f:47:39 ssid='galactica' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
skip - SSID mismatch
2: 00:15:e9:62:a6:70 ssid='AundK' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
3: 00:c0:49:54:61:f8 ssid='MSHEIMNETZ' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
4: 00:14:6c:ce:31:f4 ssid='anders' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
5: 00:09:5b:72:ff:cc ssid='<hidden>' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
6: 00:11:50:ff:fc:f8 ssid='belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
7: 00:0f:b5:17:d2:d6 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
8: 00:14:6c:79:33:42 ssid='mechitaristen' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
No APs found - clear blacklist and try again
Removed BSSID 00:14:bf:a2:6f:fb from blacklist (clear)
Selecting BSS from priority group 1
0: 00:14:bf:a2:6f:fb ssid='mywpasid' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
selected based on RSN IE
Trying to associate with 00:14:bf:a2:6f:fb (SSID='mywpasid' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=16 |
my wpa_supplicant.conf:
| Code: | # This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
#network={
# key_mgmt=NONE
# priority=-9999
#}
network={
ssid="mywpasid"
#scan_ssid=1 #this is only needed if you are not broadcasting your network
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk=wpa-key
}
network={
ssid="kobol"
#scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP
group=TKIP
psk=wpa-key
} |
kobol is the network i could connect to using wpa manually and w/ kernel 2.18-r3 |
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Sun Jan 07, 2007 9:45 pm Post subject: |
|
|
I wanted to try the wireless with portage-ipw2100 and ieee80211, but ran into the same compile error as in this thread: https://forums.gentoo.org/viewtopic-p-3796104.html#3796104
then I've just re-emerged the kernel, unmerged ieee80211 and ipw2100 and recompiled the kernel with exactly the same config as phreak_ suggests in the other thread.
but nothing has changed, my wireless can still see all networks but always fails to authenticate (I'm now trying wpa_supplicant manually most of the time).
anyone any ideas? i need the ability to connect to (at least unencrypted) wireless at university |
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Sun Jan 07, 2007 9:57 pm Post subject: |
|
|
whohoo, something's workin, but i can't figure out why or how:
NetworkManager is working, but shows the "no connection" icon. If I use wpa_supplicant, it cant establish a connection to any accesspoint. but I've just typed in iwconfig and this tells me, that I'm connected to belkin54g, thus the unencrypted AP. with dhclient eth1 I can get an IP too.
so, it seems that there is a way, but I really don't know why neither wpa_supplicant nor NM work
besides that, i do also wanna be able to connect to my encrypted AP at home (other people with centrino duo notebooks can connect). |
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Sun Jan 07, 2007 10:39 pm Post subject: |
|
|
could this line be one of the causes for my problem(s), from /var/log/messages:
| Code: | Jan 7 23:35:24 otr NetworkManager: <debug> [1168212924.353889] nm_device_802_11_wireless_get_activation_ap(): Forcing AP 'belkin54g'
Jan 7 23:35:24 otr NetworkManager: <info> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / belkin54g
Jan 7 23:35:24 otr NetworkManager: <info> Deactivating device eth1.
Jan 7 23:35:24 otr dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Jan 7 23:35:24 otr NetworkManager: <info> Device eth1 activation scheduled...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) started...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jan 7 23:35:24 otr NetworkManager: <info> Activation (eth1/wireless): access point 'belkin54g' is unencrypted, no key needed.
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was 'OK'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'AP_SCAN 1'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was 'OK'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'ADD_NETWORK'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was '0'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 ssid 62656c6b696e353467'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was 'OK'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was 'OK'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: sending command 'ENABLE_NETWORK 0'
Jan 7 23:35:24 otr NetworkManager: <info> SUP: response was 'OK'
Jan 7 23:35:25 otr NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
[i]Jan 7 23:35:25 otr ipw2100: Fatal interrupt. Scheduling firmware restart.
Jan 7 23:35:29 otr ipw2100: Fatal interrupt. Scheduling firmware restart.
Jan 7 23:35:38 otr ipw2100: Fatal interrupt. Scheduling firmware restart.[/i]
Jan 7 23:35:45 otr NetworkManager: <info> Activation (eth1/wireless): association took too long (>20s), failing activation.
Jan 7 23:35:45 otr NetworkManager: <info> Activation (eth1) failure scheduled...
Jan 7 23:35:45 otr NetworkManager: <info> Activation (eth1) failed for access point (belkin54g)
Jan 7 23:35:45 otr NetworkManager: <info> Activation (eth1) failed.
Jan 7 23:35:45 otr NetworkManager: <info> Deactivating device eth1.
Jan 7 23:35:46 otr dhclient: receive_packet failed on eth1: Network is down
Jan 7 23:35:46 otr dhclient: receive_packet failed on eth1: Network is down
[i]Jan 7 23:35:46 otr ipw2100: Fatal interrupt. Scheduling firmware restart.
Jan 7 23:35:48 otr ipw2100: Fatal interrupt. Scheduling firmware restart.[/i]
|
these fatal interrupts appear every few seconds, the only (useful?) bit of information was this: http://ipw2100.sourceforge.net/todo.php |
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Mon Jan 08, 2007 6:12 pm Post subject: |
|
|
connecting manually to an unencrypted network works only every now and then
this really makes no fun  |
|
| Back to top |
|
|
raylpc
Guru
Joined: 07 Aug 2003
Posts: 310
Location: Toronto, Canada
|
| Posted: Sun Jan 21, 2007 11:15 pm Post subject: |
|
|
| my ipw2100 also stopped working with gentoo-sources-2.6.19-r3. |
|
| Back to top |
|
|
acheta
n00b
Joined: 25 May 2006
Posts: 20
|
| Posted: Thu Jan 25, 2007 6:54 pm Post subject: |
|
|
| raylpc wrote: | | my ipw2100 also stopped working with gentoo-sources-2.6.19-r3. |
yeah, i switched back to 2.6.18-r3 because i couldn't live with the hardly working wifi. I'll try again when i have more time for playing around, that's currently not the case, i fear. |
|
| Back to top |
|
|
|
Networking & Security
