| View previous topic :: View next topic |
| Author |
Message |
elkor
n00b
Joined: 10 Jan 2007
Posts: 5
|
 Posted: Wed Jan 10, 2007 2:34 pm Post subject: Modular X migration screen resolution problem |
 |
|
I recently moved to modular X and ran into a few issues most of which I've solved.
I do however have one remaining problem that should be obvious but apparently I'm missing it.
X refuses to go into 1600x1200 resolution regardless of what I do, giving me the generic (no mode of this name) message.
I've fixed a few things that were contributing to this, including moving from a 2.6.11 kernel to 2.6.18 (and an associated /dev/appgart | udev problem that accompanied it). I've generated new modelines tried things such as setting the vert and horiz sync ranges to rediculously high values (none of which were necessary for this rez under the monothic X)
I wouldn't post the whole Xorg log here normally, but it doesn't appear to be anything obvious... or maybe It is something stupid and I've just been staring at it for too long. I will snip out some of the more verbose and hopefully irrelevant sections.
Again, any help would be appreciated! thanks 
xorg.conf snippet:
| Code: | SNIP
# **********************************************************************
Section "Monitor"
Identifier "My Monitor"
HorizSync 30.5-104.0
#HorizSync 31.5-94.0
VertRefresh 40.0-235.0
#VertRefresh 50.0-205.0
Modeline "1600x1200_85.00" 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -HSync +Vsync
Modeline "1600x1200_80.00" 220.25 1600 1720 1896 2192 1200 1201 1204 1256 -HSync +Vsync
Modeline "1600x1200_75.00" 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -HSync +Vsync
Modeline "1600x1200_70.00" 190.25 1600 1712 1888 2176 1200 1201 1204 1249 -HSync +Vsync
Modeline "1600x1200_65.00" 176.23 1600 1712 1888 2176 1200 1201 1204 1246 -HSync +Vsync
EndSection
# **********************************************************************
Section "Device"
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
VideoRam 65535
BusID "PCI:0:2:0"
EndSection
# **********************************************************************
Section "Screen"
Identifier "Screen 1"
Device "** Intel i810 (generic) [i810]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200_85.00" "1600x1200_80.00" "1600x1200_75.00" "1600x1200_70.00" "1600x1200_65.00" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# **********************************************************************
|
and The log
| Code: |
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.11-gentoo-r9 i686
Current Operating System: Linux Ix 2.6.18-gentoo-r6 #1 SMP PREEMPT Tue Jan 9 11:54:20 EST 2007 i686
Build Date: 09 January 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 10 09:12:53 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** Intel i810 (generic) [i810]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
SNIP
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfeafffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82865G Integrated Graphics Controller rev 2, Mem @ 0xf0000000/27, 0xfeb80000/19, I/O @ 0xed98/3
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
SNIP
(II) Active PCI resource ranges after removing overlaps:
SNIP
(II) OS-reported resource ranges after removing overlaps with PCI:
SNIP
(II) All system resource ranges:
SNIP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.6.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:02:0
(--) Chipset 865G found
(II) resource ranges after xf86ClaimFixedResources() call:
SNIP
(II) resource ranges after probing:
SNIP
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 865G
(--) I810(0): Chipset: "865G"
(--) I810(0): Linear framebuffer at 0xF0000000
(--) I810(0): IO registers at addr 0xFEB80000
(II) I810(0): 1 display pipe available.
(II) I810(0): detected 8060 kB stolen memory.
(II) I810(0): Kernel reported 110336 total, 1 used
(II) I810(0): I830CheckAvailableMemory: 441340 kB available
(WW) I810(0): VideoRAM reduced to 61440 kByte (page aligned - was 65535)
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(WW) I810(0): Extended BIOS function 0x5f11 not supported.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Tweak BIOS image to 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 8060 kByte
(**) I810(0): VideoRAM: 61440 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 2972
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: LFP (local flat panel): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Currently active displays on Pipe A:
(II) I810(0): CRT
(II) I810(0): DFP (digital flat panel)
(II) I810(0): No display size information available for pipe A.
(==) I810(0): Display is using Pipe A
(--) I810(0): Maximum frambuffer space: 61272 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(--) I810(0): A non-CRT device is attached to pipe A.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte
Mode: 30 (640x480)
SNIP
Mode: 32 (800x600)
SNIP
Mode: 34 (1024x768)
SNIP
Mode: 38 (1280x1024)
SNIP
Mode: 3a (1600x1200)
SNIP
Mode: 3c (1920x1440)
SNIP
Mode: 41 (640x480)
SNIP
Mode: 43 (800x600)
SNIP
Mode: 45 (1024x768)
SNIP
Mode: 49 (1280x1024)
SNIP
Mode: 4b (1600x1200)
SNIP
Mode: 4d (1920x1440)
SNIP
*Mode: 50 (640x480)
SNIP
*Mode: 52 (800x600)
SNIP
*Mode: 54 (1024x768)
SNIP
Mode: 58 (1280x1024)
SNIP
Mode: 5a (1600x1200)
ModeAttributes: 0x9a
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005ace
BytesPerScanline: 6400
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 6400
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 5c (1920x1440)
SNIP
(II) I810(0): My Monitor: Using hsync range of 30.50-104.00 kHz
(II) I810(0): My Monitor: Using vrefresh range of 40.00-235.00 Hz
(II) I810(0): Not using mode "1600x1200_85.00" (no mode of this name)
(II) I810(0): Not using mode "1600x1200_80.00" (no mode of this name)
(II) I810(0): Not using mode "1600x1200_75.00" (no mode of this name)
(II) I810(0): Not using mode "1600x1200_70.00" (no mode of this name)
(II) I810(0): Not using mode "1600x1200_65.00" (no mode of this name)
(II) I810(0): Not using mode "1600x1200" (no mode of this name)
(II) I810(0): Not using mode "1280x1024" (no mode of this name)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(**) I810(0): *Built-in mode "800x600"
(**) I810(0): *Built-in mode "640x480"
(==) I810(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) I810(0): VBE Restore workaround: enabled.
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
SNIP
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 512 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 6144 kByte
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000
(WW) I810(0): xf86AllocateGARTMemory: allocation of 4 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000
(II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffa000 (0x13748000).
(WW) I810(0): xf86AllocateGARTMemory: allocation of 16 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fea000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xe0027000
(II) I810(0): [drm] mapped SAREA 0xe0027000 to 0xb7aa6000
(II) I810(0): [drm] framebuffer handle = 0xf0020000
(II) I810(0): [drm] added 1 reserved context for kernel
(WW) I810(0): xf86AllocateGARTMemory: allocation of 8 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 32 kB for the logical context at 0x7fe2000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 768 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 3072 kB for the back buffer at 0x7800000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 768 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 3072 kB for the depth buffer at 0x7400000.
(II) I810(0): Allocated 48896 kB for textures at 0x620000
(WW) I810(0): xf86AllocateGARTMemory: allocation of 11777 pages failed
(Cannot allocate memory)
(II) I810(0): 0x822d290: Memory at offset 0x00020000, size 6144 kBytes
(II) I810(0): 0x822e1f8: Memory at offset 0x07fff000, size 4 kBytes
(II) I810(0): 0x822e220: Memory at offset 0x07ffb000, size 16 kBytes
(II) I810(0): 0x822dddc: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x822d2d0: Memory at offset 0x07fea000, size 64 kBytes
(II) I810(0): 0x822e248: Memory at offset 0x07ffa000, size 4 kBytes
(II) I810(0): 0x822d468: Memory at offset 0x07fe2000, size 32 kBytes
(II) I810(0): 0x822d488: Memory at offset 0x07800000, size 3072 kBytes
(II) I810(0): 0x822d4a8: Memory at offset 0x07400000, size 3072 kBytes
(II) I810(0): 0x822d4c8: Memory at offset 0x00620000, size 48896 kBytes
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] Registers = 0xfeb80000
(II) I810(0): [drm] ring buffer = 0xf0000000
(II) I810(0): [drm] init sarea width,height = 1024 x 768 (pitch 1024)
(II) I810(0): [drm] Mapping front buffer
(II) I810(0): [drm] Front Buffer = 0xf0020000
(II) I810(0): [drm] Back Buffer = 0xf7800000
(II) I810(0): [drm] Depth Buffer = 0xf7400000
(II) I810(0): [drm] textures = 0xf0620000
(II) I810(0): [drm] Initialized kernel agp heap manager, 50069504
(II) I810(0): [drm] dma control initialized, using IRQ 16
(II) I810(0): [dri] visual configs initialized
(==) I810(0): Write-combining range (0xf0000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x007df000 (pgoffset 2015)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x07fe2000 (pgoffset 32738)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x07800000 (pgoffset 30720)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x07400000 (pgoffset 29696)
(WW) I810(0): PGTBL_ER is 0x00000029
(--) I810(0): A non-CRT device is attached to pipe A.
No refresh rate overrides will be attempted.
(II) I810(0): Display plane A is enabled and connected to Pipe A.
(II) I810(0): Enabling plane A.
(II) I810(0): Display plane A is now enabled and connected to Pipe A.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 1528 Mbyte/s, pipe bandwidths are 252 Mbyte/s, 0 Mbyte/s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(II) I810(0): Set up overlay video
(II) I810(0): X context handle = 0x1
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
(II) I810(0): RandR enabled, ignore the following RandR disabled message.
(II) I810(0): Rotating to 0 degrees
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
|
Last edited by elkor on Thu Jan 11, 2007 1:39 pm; edited 1 time in total |
|
| Back to top |
|
 |
Drone1
Apprentice
Joined: 27 Sep 2005
Posts: 232
Location: United States of Texas
|
| Posted: Wed Jan 10, 2007 4:52 pm Post subject: |
|
|
Few questions...
Is there a particular reason your are using modelines?
Have you tried just setting "1600x1200" as an available res under 'Modes' ?
Is the i810 capable of producing 1600x1200 res?
Monitor capable of displaying 1600x1200? |
|
| Back to top |
|
|
elkor
n00b
Joined: 10 Jan 2007
Posts: 5
|
| Posted: Wed Jan 10, 2007 4:59 pm Post subject: |
|
|
thanks for replying, to answer:
went to modelines because "1600x1200" wasn't working, it's still in the modes list though... I just added the modelines as well. (you can still see the "Not using mode "1600x1200" (no mode of this name)" error about 3/4 of the way through the output file.
And yep, the same card and monitor were running fine in 1600x1200 on the monolithic Xorg package. |
|
| Back to top |
|
|
Drone1
Apprentice
Joined: 27 Sep 2005
Posts: 232
Location: United States of Texas
|
| Posted: Wed Jan 10, 2007 5:41 pm Post subject: |
|
|
Its gonna be the modelines then....
From my experience, I've always set the modeline name format as this.
"1600x1200_85" "HRes x Vres _ RefRate"
The _ (underscore) being the key here. Any time I've set it to something else, like
"1280x720@85"
it has NEVER worked.
Also, I've never had a modeline work with decimal places in the Refresh Rate.
I'm currently running my mythbox with a "1280x720_60" modeline name.
That being said, see if these links help.
XF86 modeline generator
- 1600x1200 is a 4:3 ratio, obviously.
- the line it generates will give you an "HresxVres@RR". @ symbol didn't work for me; _ symbol did
modeline indepth |
|
| Back to top |
|
|
elkor
n00b
Joined: 10 Jan 2007
Posts: 5
|
| Posted: Wed Jan 10, 2007 6:26 pm Post subject: |
|
|
Thanks again, but still no joy.
I generated the modelines using gtf, and just entered them into xorg.conf the way gtf spat them out; but having it choke on the decimal seems reasonable so I removed those from both the monitor and screen sections so that the names matched and then restarted X to no avail.
Then I tried the generator link you used which produced different values, so I replaced both the 75Hz and the 65Hz entries with the modelines from the link and I'm still stuck in 1024x768 after restarting X.
Finally, I took and added the -HSync +Vsync parameters to the end of the new modelines (which the new generator did not supply) but it didn't seem to have any effect. |
|
| Back to top |
|
|
elkor
n00b
Joined: 10 Jan 2007
Posts: 5
|
| Posted: Thu Jan 11, 2007 12:48 pm Post subject: |
|
|
| bump |
|
| Back to top |
|
|
elkor
n00b
Joined: 10 Jan 2007
Posts: 5
|
| Posted: Mon Jan 15, 2007 1:20 pm Post subject: |
|
|
| one last bump, hopeing that *somebody* has some idea what's going on with this. it's driving me crazy |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
