| View previous topic :: View next topic |
| Author |
Message |
jmanko
Tux's lil' helper
Joined: 11 Sep 2005
Posts: 139
Location: NEPA, USA
|
 Posted: Tue Aug 29, 2006 2:33 am Post subject: ivman, USB HD, HAL |
 |
|
I've tried hal version 0.5.5.1-r3 and 0.5.7.1 with ivman-0.6.12/udev-096-r1, but neither hal version worked with ivman for automounting a USB HD I have. I included some output below. Nothing is mount under /media, and I don't see anything for mounting manually in /dev. I didn't set up any custom reules for ivman. Are I supposed to? Any ideas? Thanks.
| Code: |
From /var/log/messages
Aug 29 13:23:11 bu usb 4-4: new high speed USB device using ehci_hcd and address 4
Aug 29 13:23:11 bu usb 4-4: configuration #1 chosen from 1 choice
Aug 29 13:23:11 bu scsi2 : SCSI emulation for USB Mass Storage devices
Aug 29 13:23:11 bu usb-storage: device found at 4
Aug 29 13:23:11 bu usb-storage: waiting for device to settle before scanning
Aug 29 13:23:16 bu Vendor: FUJITSU Model: MHT2040AH Rev: 0811
Aug 29 13:23:16 bu Type: Direct-Access ANSI SCSI revision: 00
Aug 29 13:23:16 bu usb-storage: device scan complete
Aug 29 13:23:16 bu scsi.agent[9852]: disk at /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host2/target2:0:0/2:0:0:0
|
| Code: | # lsusb
Bus 004 Device 004: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
|
| Code: | # lsmod
Module Size Used by
ohci_hcd 18756 0
usb_storage 39108 0
scsi_mod 86596 1 usb_storage
ehci_hcd 27016 0
uhci_hcd 20684 0
usbcore 113536 5 ohci_hcd,usb_storage,ehci_hcd,uhci_hcd
|
| Code: | # ls /dev
adsp hda3 mixer ram9 tty13 tty31 tty5 ttyS1
agpgart hdc null random tty14 tty32 tty50 ttyS2
audio hpet port rd tty15 tty33 tty51 ttyS3
bus hw_random ptmx rtc tty16 tty34 tty52 urandom
cdrom initctl pts sequencer tty17 tty35 tty53 vcs
cdrw input ram0 sequencer2 tty18 tty36 tty54 vcs1
console kmem ram1 shm tty19 tty37 tty55 vcs12
core kmsg ram10 snapshot tty2 tty38 tty56 vcs7
disk log ram11 snd tty20 tty39 tty57 vcsa
dri loop ram12 sound tty21 tty4 tty58 vcsa1
dsp loop0 ram13 stderr tty22 tty40 tty59 vcsa12
dvd loop1 ram14 stdin tty23 tty41 tty6 vcsa7
fb loop2 ram15 stdout tty24 tty42 tty60 zero
fb0 loop3 ram2 tts tty25 tty43 tty61
fbsplash loop4 ram3 tty tty26 tty44 tty62
fd loop5 ram4 tty0 tty27 tty45 tty63
full loop6 ram5 tty1 tty28 tty46 tty7
hda loop7 ram6 tty10 tty29 tty47 tty8
hda1 mem ram7 tty11 tty3 tty48 tty9
hda2 misc ram8 tty12 tty30 tty49 ttyS0
|
| Code: | # ivman
manager.c:1004 (ivm_media_changed) /org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host_scsi_device_lun0 wasn't mounted, by us or by others...
manager.c:1004 (ivm_media_changed) /org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_usbraw wasn't mounted, by us or by others...
manager.c:1004 (ivm_media_changed) /org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host wasn't mounted, by us or by others...
manager.c:1004 (ivm_media_changed) /org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0 wasn't mounted, by us or by others...
manager.c:1004 (ivm_media_changed) /org/freedesktop/Hal/devices/usb_device_5e3_702_noserial wasn't mounted, by us or by others...
|
| Code: | # lshal
udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial'
info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial' (string)
linux.subsystem = 'usb' (string)
linux.hotplug_type = 1 (0x1) (int)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = false (bool)
usb_device.is_self_powered = true (bool)
usb_device.version_bcd = 512 (0x200) (int)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.linux.device_number = 4 (0x4) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.max_power = 96 (0x60) (int)
usb_device.device_revision_bcd = 51 (0x33) (int)
info.product = 'USB 2.0 IDE Adapter' (string)
usb_device.product = 'USB 2.0 IDE Adapter' (string)
info.vendor = 'Genesys Logic, Inc.' (string)
usb_device.vendor = 'Genesys Logic, Inc.' (string)
usb_device.product_id = 1794 (0x702) (int)
usb_device.vendor_id = 1507 (0x5e3) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
info.linux.driver = 'usb' (string)
info.bus = 'usb_device' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_usbraw' (string)
linux.device_file = '/dev/bus/usb/004/004' (string)
linux.subsystem = 'usb_device' (string)
linux.hotplug_type = 2 (0x2) (int)
usbraw.device = '/dev/bus/usb/004/004' (string)
info.product = 'USB Raw Device Access' (string)
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev4.4' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0' (string)
linux.subsystem = 'usb' (string)
linux.hotplug_type = 1 (0x1) (int)
info.product = 'USB Mass Storage Interface' (string)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
info.linux.driver = 'usb-storage' (string)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
usb.configuration_value = 1 (0x1) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.vendor_id = 1507 (0x5e3) (int)
usb.product_id = 1794 (0x702) (int)
usb.vendor = 'Genesys Logic, Inc.' (string)
usb.product = 'USB Mass Storage Interface' (string)
usb.device_revision_bcd = 51 (0x33) (int)
usb.max_power = 96 (0x60) (int)
usb.num_ports = 0 (0x0) (int)
usb.linux.device_number = 4 (0x4) (int)
usb.speed_bcd = 294912 (0x48000) (int)
usb.version_bcd = 512 (0x200) (int)
usb.is_self_powered = true (bool)
usb.can_wake_up = false (bool)
usb.bus_number = 4 (0x4) (int)
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host'
info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host' (string)
linux.subsystem = 'scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
scsi_host.host = 2 (0x2) (int)
info.product = 'SCSI Host Adapter' (string)
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host2' (string)
linux.sysfs_path = '/sys/class/scsi_host/host2' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host_scsi_device_lun0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host_scsi_device_lun0' (string)
linux.subsystem = 'scsi' (string)
linux.hotplug_type = 1 (0x1) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'FUJITSU' (string)
scsi.model = 'MHT2040AH' (string)
info.product = 'SCSI Device' (string)
scsi.lun = 0 (0x0) (int)
scsi.target = 0 (0x0) (int)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host' (string)
info.bus = 'scsi' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host2/target2:0:0/2:0:0:0' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host2/target2:0:0/2:0:0:0' (string)
|
_________________
"What stands in the way becomes the way." -- Marcus Aurelius |
|
| Back to top |
|
 |
jmanko
Tux's lil' helper
Joined: 11 Sep 2005
Posts: 139
Location: NEPA, USA
|
| Posted: Tue Aug 29, 2006 11:25 pm Post subject: |
|
|
I'm looking at the ivman and HAL websites, but there does not seem to be any activity. Are the problems with ivman and HAL just a Gentoo thing? Everything seems to be working except for the actualy mounting. Is there a good resource available for ivman rules. Maybe I just need to create some for this device. Does HAL need rules to be added?
_________________
"What stands in the way becomes the way." -- Marcus Aurelius |
|
| Back to top |
|
|
Olis
Apprentice
Joined: 29 Sep 2004
Posts: 177
Location: Germany
|
| Posted: Wed Aug 30, 2006 7:14 am Post subject: Re: ivman, USB HD, HAL |
|
|
| jmanko wrote: | | I've tried hal version 0.5.5.1-r3 and 0.5.7.1 with ivman-0.6.12/udev-096-r1, but neither hal version worked with ivman for automounting a USB HD I have. I included some output below. Nothing is mount under /media, and I don't see anything for mounting manually in /dev. I didn't set up any custom reules for ivman. Are I supposed to? Any ideas? Thanks. |
This won't help you very much, but I have the same problem at the moment. Also with a Genesys Logic USB device, hope this isn't the reason  .
Everything worked fine until recently, but I'm not sure whether it was a new kernel, new dbus, new hal or ivman that broke automount on my system.
I'm running Kernel 2.6.17-r4, hal 0.5.7-r1, dbus 0.61-r1, udev 087-r1, pmount 0.9.9 and ivman 0.6.12.
Olis |
|
| Back to top |
|
|
jmanko
Tux's lil' helper
Joined: 11 Sep 2005
Posts: 139
Location: NEPA, USA
|
| Posted: Fri Sep 01, 2006 2:03 am Post subject: |
|
|
Ok, I've compiled my system with the latest kernel, 2.6.17-r7, and I now get a /dev/sda device. Manually mounting works fine, but HAL is not detecting this device as mountable (I think).
I found this link: http://rox.sourceforge.net/phpwiki/index.php/HintsAndTips/HAL
Notice this statement (could this be my problem? - I know it's from 2005):
| Quote: | Ivman rules to add devices to your panel
* For this to work, HAL needs this small patch applied:
--- hal-0.5.4/hald/linux2/blockdev.c 2005-08-10 06:05:58.000000000 -0300
+++ hal-0.5.4-lijon/hald/linux2/blockdev.c 2005-10-21 19:15:28.000000000 -0200
@@ -202,7 +202,7 @@
device_property_atomic_update_begin ();
hal_device_property_set_bool (d, "volume.is_mounted", FALSE);
- hal_device_property_set_string (d, "volume.mount_point", "");
+// hal_device_property_set_string (d, "volume.mount_point", "");
device_property_atomic_update_end ();
HAL_INFO (("Clearing mount point for %s", device_file));
|
Doing an lshal:
| Code: | # lshal
udi = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHT2040AH'
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHT2040AH' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHT2040AH' (string)
storage.requires_eject = false (bool)
storage.hotpluggable = true (bool)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.product = 'MHT2040AH' (string)
info.vendor = 'FUJITSU' (string)
storage.removable = false (bool)
storage.physical_device = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0' (string)
storage.lun = 0 (0x0) (int)
storage.firmware_version = '0811' (string)
storage.serial = 'FUJITSU_MHT2040AH' (string)
storage.vendor = 'FUJITSU' (string)
storage.model = 'MHT2040AH' (string)
storage.drive_type = 'disk' (string)
storage.automount_enabled_hint = true (bool)
storage.media_check_enabled = false (bool)
storage.no_partitions_hint = false (bool)
storage.bus = 'usb' (string)
block.is_volume = false (bool)
block.minor = 0 (0x0) (int)
block.major = 8 (0x8) (int)
block.device = '/dev/sda' (string)
linux.hotplug_type = 3 (0x3) (int)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_702_noserial_if0_scsi_host_scsi_device_lun0' (string)
linux.sysfs_path_device = '/sys/block/sda' (string)
linux.sysfs_path = '/sys/block/sda' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_6888B4A788B47562'
volume.unmount.valid_options = {'lazy'} (string list)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
volume.ignore = false (bool)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6888B4A788B47562' (string)
volume.partition.msdos_part_table_type = 7 (0x7) (int)
info.product = 'mapower' (string)
volume.size = 39999504384 (0x950280000) (uint64)
volume.num_blocks = 78124032 (0x4a81400) (int)
volume.block_size = 512 (0x200) (int)
volume.partition.number = 1 (0x1) (int)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
volume.is_partition = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.mount_point = '' (string)
volume.label = 'mapower' (string)
volume.uuid = '6888B4A788B47562' (string)
volume.fsversion = '3.1' (string)
volume.fsusage = 'filesystem' (string)
volume.fstype = 'ntfs' (string)
storage.model = '' (string)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHT2040AH' (string)
block.is_volume = true (bool)
block.minor = 1 (0x1) (int)
block.major = 8 (0x8) (int)
block.device = '/dev/sda1' (string)
linux.hotplug_type = 3 (0x3) (int)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHT2040AH' (string)
linux.sysfs_path_device = '/sys/block/sda/sda1' (string)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
|
For those who are interested, here is part of my .config (only including what I think might be relevant):
| Code: | #
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SAS_ATTRS=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
#
# USB Imaging devices
#
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_ZD1201=m
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_OPTION=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_WBSD=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 |
_________________
"What stands in the way becomes the way." -- Marcus Aurelius |
|
| Back to top |
|
|
dob
Apprentice
Joined: 04 Oct 2002
Posts: 199
Location: S.L.P.
|
| Posted: Sun Sep 03, 2006 11:20 pm Post subject: |
|
|
| Same problem here, it used to work, but now my USB hd no longer gets mounted (ivman says something about not mounting it because it doesn't look like a removable device) |
|
| Back to top |
|
|
afabco
Guru
Joined: 24 Feb 2004
Posts: 380
|
| Posted: Fri Sep 08, 2006 6:23 pm Post subject: |
|
|
bookmark
_________________
Anyone who puts a small gloss on a fundamental technology, calls it proprietary, and then tries to keep others from building on it, is a thief.
-Tim O'Reilly |
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Sat Sep 09, 2006 11:59 pm Post subject: |
|
|
perfervidquidam, using /etc/pmount.allow doesn't exclude you from using custom rules. If you use this in combination with a custom udev rule it works fine and stays constant.
The problem is the the driver itself reports a property of not being removeable. Maybe newer pmounts/HAL have changed, but this used to be the solution and using pmount.allow and a custom udev rule works flawless for me. |
|
| Back to top |
|
|
perfervidquidam
n00b
Joined: 09 Sep 2006
Posts: 1
|
| Posted: Sun Sep 10, 2006 1:49 am Post subject: |
|
|
I got it to work with something as simple as this:
<ivm:Match name="hal.info.udi" value="/org/freedesktop/Hal/devices/volume_uuid_7bb7f6c0_dc36_49c4_bea3_871cd633df08">
<ivm:Option name="mount" value="true" />
</ivm:Match>
The udi is the one for the volume I want to mount.
I do have a question though. It mounts using pmount and tries to mount it as a bunch of other types before getting it right.
| Quote: | NTFS-fs error (device sda1): ntfs_fill_super(): Not an NTFS volume.
VFS: Can't find an ext2 filesystem on dev sda1.
VFS: Can't find an ext2 filesystem on dev sda1.
ReiserFS: sda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda1
ReiserFS: sda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda1
XFS mounting filesystem sda1
|
Is it possible to tell ivman or hal to mount it as XFS to begin with? It's weird that it knows the fstype in lshal yet doesn't use the volume.fstype to mount it. |
|
| Back to top |
|
|
Truzzone
Guru
Joined: 16 Oct 2003
Posts: 492
Location: Italy
|
| Posted: Fri Feb 09, 2007 9:09 pm Post subject: |
|
|
I have the same problem with ivman:
ivman says something about not mounting it because it doesn't look like a removable device
with my usb hd with ntfs partitions 
Any suggestions?
| Quote: |
Device /dev/sdc1 won't be mounted because no mount policy was specified on volume or storage device and storage device does not appear to be removable |
The problem is that I change a lot of hds and if I write a custom rules with UDI I mount only one hds.
It's possible to mount all hds without setting always time in config with it's strings? 
Best regards,
Truzzone |
|
| Back to top |
|
|
iulica
n00b
Joined: 28 Jul 2004
Posts: 34
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
