View previous topic :: View next topic |
Author |
Message |
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Mon Feb 19, 2007 11:40 pm Post subject: AIGLX + Beryl = lahmarschig!!! |
|
|
Hi
Als hab mir jetzt extra ne Nvidia GeForce 6200 gekauft damit AIGLX + Beryl sauber laufen, da es weder mit der ATI Radeon 9200 noch mit der Nvidia FX 5200 unter Gentoo flüssig lief!
Tja und was muss ich nun feststellen?
Es ruckelt nocht immer!
Das kann doch nicht wirklich sein das es an Gentoo liegt?
Selber Hardware mit Fedora, Mandriva oder Arch und es lauft flüssig!!!!
Hardware:
AMD XP 1800+
Shuttle AK32A (KT266A)
1GB SD-Ram
Nvidia GeForce 6200 (Asus Nx6200)
36GB SCSI HDD
Pakete:
xorg-server-1.1.1.r4
kde-3.5.6
beryl*-0.1.4
x11-wm/emerald-0.1.4
kbfx-0.4.9.2_rc4
Kann mir mal eine sagen wieso das so extrem ruckelt unter Gentoo? |
|
Back to top |
|
|
sewulba Guru
Joined: 09 Feb 2005 Posts: 517 Location: Heidelberg
|
Posted: Tue Feb 20, 2007 12:08 am Post subject: |
|
|
Bei mir ist es das gleiche... Unter Sabayon-Linux, welches ja Gentoobasierend ist läuft es einwandfrei, aber unter Gentoo direkt läuft es einfach nicht sauber.
Ich würde sagen: Es liegt an einem sebst, zumindest in meinem Fall, denn unter sabayon läuft es ja einwandfrei bei mir auf dem gleichen Computer!
SeW _________________ System1:Apple PowerMac Dual G4 @ 1,83GHz with 2GB Ram. 400GB + 80GB HDD, Gentoo 13.0-ppc32
System2:Apple MacIntosh PowerMac Dual G5 @ 2.7 GHz/1,35GHz FSB... 8GB Ram. 250GB SATA. Gentoo 10.0-PPC64-64ul |
|
Back to top |
|
|
Vortex375 Veteran
Joined: 03 Mar 2005 Posts: 1739 Location: Deutschland
|
Posted: Tue Feb 20, 2007 12:58 am Post subject: |
|
|
Hmm ich kann mich eigentlich nicht beklagen. Ich verwende das beryl-ebuild aus dem sabayon-overlay, weil das im portage-Tree ist ja steinalt und habe keine Performance-Probleme. |
|
Back to top |
|
|
Treborius Guru
Joined: 18 Oct 2005 Posts: 585 Location: Berlin
|
Posted: Tue Feb 20, 2007 1:05 am Post subject: |
|
|
wenn es auf der selben hardware mit ner anderen distri sauber läuft, dann ist es ist deine schuld
alter nvidia-treiber? wäre mein erster einfall _________________ Systems running gentoo :
Desktop, Laptop, ZOTAC AD-10 media-center, odroid-xu4 server / wLan-router |
|
Back to top |
|
|
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Tue Feb 20, 2007 1:10 am Post subject: |
|
|
Treborius wrote: | wenn es auf der selben hardware mit ner anderen distri sauber läuft, dann ist es ist deine schuld
alter nvidia-treiber? wäre mein erster einfall |
[ Searching for package 'nvidia' in all categories among: ]
* installed packages
[I--] [ ~] media-video/nvidia-settings-1.0.20061102 (0)
[I--] [ ~] x11-drivers/nvidia-drivers-1.0.9746 (0)
Neusten Treiber aus dem Testing Zweig |
|
Back to top |
|
|
Child_of_Sun_24 Guru
Joined: 28 Jul 2004 Posts: 588
|
|
Back to top |
|
|
Anarcho Advocate
Joined: 06 Jun 2004 Posts: 2970 Location: Germany
|
Posted: Tue Feb 20, 2007 6:43 am Post subject: |
|
|
Wichtig ist: Renderpfad -> Texture from Pixmap
Bei mir läuft Beryl auf dem laptop mit Intel 855 GM völlig flüssig. Allerdings habe ich auf meinem Desktop mit NVidia und AMD64 massive Bildfehler mit Beryl. Z.b. seh ich nichts mehr was ich in ein Terminal schreibe...
Daher verwende ich Beryl nur auf dem Laptop...
Mag an 64Bit liegen, vielleicht auch an Xinerama. _________________ ...it's only Rock'n'Roll, but I like it! |
|
Back to top |
|
|
tgurr Retired Dev
Joined: 27 Jan 2004 Posts: 571 Location: germany
|
Posted: Tue Feb 20, 2007 7:43 am Post subject: |
|
|
Ist schon ein bisschen her seit ich beryl getestet habe aber unter meinem 64bit Gentoo mit einer NVIDIA lief es ganz flüssig. Erst als man ca. 20 Fenster offen hatte hat es angefangen schwerfälliger zu werden je mehr Fenster man offen hatte und da ich das recht oft habe ist beryl atm leider noch nicht für mich zu gebrauchen.
Läuft es bei dir allgemein schwerfällig oder auch erst mit mehreren Fenstern? |
|
Back to top |
|
|
hoschi Advocate
Joined: 19 Jul 2003 Posts: 2517 Location: Ulm, Germany, Europe
|
Posted: Tue Feb 20, 2007 9:07 am Post subject: |
|
|
Anarcho wrote: | Wichtig ist: Renderpfad -> Texture from Pixmap
Bei mir läuft Beryl auf dem laptop mit Intel 855 GM völlig flüssig. Allerdings habe ich auf meinem Desktop mit NVidia und AMD64 massive Bildfehler mit Beryl. Z.b. seh ich nichts mehr was ich in ein Terminal schreibe...
Daher verwende ich Beryl nur auf dem Laptop...
Mag an 64Bit liegen, vielleicht auch an Xinerama. |
Funktioniert bei der Textur from Pixmap mit der Intel-Grafikkarte?
Ich habe bisher noch keinen gesehen, der nicht auf diesen "Behelfsrenderer" umschalten musste, was dann wieder recht komisch ist, weil das mit den Intel-Grafikkarten wirklich problemlos laufen muesste. Da mir Beryl aber sowieso voellig ueberladen erscheint, warte ich lieber auf Gnome-2.18 bzw. was KDE so treibt. _________________ Just you and me strogg! |
|
Back to top |
|
|
Anarcho Advocate
Joined: 06 Jun 2004 Posts: 2970 Location: Germany
|
Posted: Tue Feb 20, 2007 9:46 am Post subject: |
|
|
hoschi wrote: | Anarcho wrote: | Wichtig ist: Renderpfad -> Texture from Pixmap
Bei mir läuft Beryl auf dem laptop mit Intel 855 GM völlig flüssig. Allerdings habe ich auf meinem Desktop mit NVidia und AMD64 massive Bildfehler mit Beryl. Z.b. seh ich nichts mehr was ich in ein Terminal schreibe...
Daher verwende ich Beryl nur auf dem Laptop...
Mag an 64Bit liegen, vielleicht auch an Xinerama. |
Funktioniert bei der Textur from Pixmap mit der Intel-Grafikkarte?
Ich habe bisher noch keinen gesehen, der nicht auf diesen "Behelfsrenderer" umschalten musste, was dann wieder recht komisch ist, weil das mit den Intel-Grafikkarten wirklich problemlos laufen muesste. Da mir Beryl aber sowieso voellig ueberladen erscheint, warte ich lieber auf Gnome-2.18 bzw. was KDE so treibt. |
Ja, bei mir steht Beryl auf Texture from Pixmap und läuft prima. Mit "Copy" lief es total lahm.
Wichtig ist wirklich das Direct Rendering auf Yes steht, sonst hatte ich nur nen weissen Kubus angezeigt bekommen. _________________ ...it's only Rock'n'Roll, but I like it! |
|
Back to top |
|
|
Vortex375 Veteran
Joined: 03 Mar 2005 Posts: 1739 Location: Deutschland
|
Posted: Tue Feb 20, 2007 11:11 am Post subject: |
|
|
Quote: | Da mir Beryl aber sowieso voellig ueberladen erscheint, warte ich lieber auf Gnome-2.18 bzw. was KDE so treibt. |
Weiß nicht, wo da das Problem liegt. Beryl ist doch wunderbar modular aufgebaut. Du kannst ja die Plug-ins aktivieren und deaktivieren wie du willst.
Trotzdem frisst beryl immer ordentlich Speicher - zwar noch vertretbar, aber wer wenig RAM hat, dem ist beryl wohl nicht zu empfehlen (allerdings braucht jedes java-Programm mehr Speicher ).
An 64bit kann das geruckel eigentlich nicht liegen. Ich habe hier auch ein 64bit Desktop-System und es läuft einwandfrei.
Meine Paket-Versionen:
Code: | x11-base/xorg-x11-7.1
x11-drivers/nvidia-drivers-1.0.9746 |
und aus dem sabayon-overlay:
Code: | x11-misc/beryl-manager-0.1.9999.2
x11-misc/beryl-settings-0.1.9999.2
x11-misc/beryl-settings-bindings-0.1.9999.2
x11-misc/beryl-settings-simple-0.1.9999.2
x11-misc/beryl-wrapper-1.5
x11-plugins/beryl-plugins-0.1.9999.2
x11-wm/beryl-core-0.1.9999.2 |
Relevante Optionen in der xorg.conf hab ich nur:
Code: |
Section "ServerLayout"
Option "Aiglx" "true"
EndSection
Section "Device"
Driver "nvidia"
Option "AddArgbGlxVisuals" "true"
Option "RenderAccel" "true"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
|
Im Moment befindet sich eine GeForce 7600 GT im System, aber es lief auch mit meiner 4200 Ti ganz ordentlich, nur musste ich da auf einige Effekte verzichten (Water- und Blur-Effekte), da diese Karte noch keine "fragment_programs" unterstützte (hat wohl was mit Shader2.0-Archtiketur zu tun. Auf jeden Fall ist die GL_ARB_fragment_program-Erweiterung nur auf Karten verfügbar, wo auf der Schachtel steht, dass sie Shader2.0-Unterstützung bieten). |
|
Back to top |
|
|
hoschi Advocate
Joined: 19 Jul 2003 Posts: 2517 Location: Ulm, Germany, Europe
|
Posted: Tue Feb 20, 2007 11:35 am Post subject: |
|
|
Anarcho wrote: | hoschi wrote: | Anarcho wrote: | Wichtig ist: Renderpfad -> Texture from Pixmap
Bei mir läuft Beryl auf dem laptop mit Intel 855 GM völlig flüssig. Allerdings habe ich auf meinem Desktop mit NVidia und AMD64 massive Bildfehler mit Beryl. Z.b. seh ich nichts mehr was ich in ein Terminal schreibe...
Daher verwende ich Beryl nur auf dem Laptop...
Mag an 64Bit liegen, vielleicht auch an Xinerama. |
Funktioniert bei der Textur from Pixmap mit der Intel-Grafikkarte?
Ich habe bisher noch keinen gesehen, der nicht auf diesen "Behelfsrenderer" umschalten musste, was dann wieder recht komisch ist, weil das mit den Intel-Grafikkarten wirklich problemlos laufen muesste. Da mir Beryl aber sowieso voellig ueberladen erscheint, warte ich lieber auf Gnome-2.18 bzw. was KDE so treibt. |
Ja, bei mir steht Beryl auf Texture from Pixmap und läuft prima. Mit "Copy" lief es total lahm.
Wichtig ist wirklich das Direct Rendering auf Yes steht, sonst hatte ich nur nen weissen Kubus angezeigt bekommen. |
Genau den weissen Kubus habe ich immer, wenn ich nicht auf "Copy" stelle. Nur, Quake3 und andere OpenGL-Applikationen laufen bei mir wunderbar, bis auf die ueblichen "Visual-Fehlermeldungen", die mit jedem Xorg-Release aber weniger werden, seit dem diese mit Xorg-7.0 aufgetaucht sind:
Code: | glxinfo | grep -i render
libGL warning: 3D driver claims to not support visual 0x5b
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 915GM 20050225 x86/MMX/SSE2
|
xorg.conf
Code: |
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/corefonts"
EndSection
Section "InputDevice"
Identifier "IBM AT Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "thinkpad"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "IBM Trackpoint"
Driver "evdev"
Option "Name" "TPPS/2 IBM TrackPoint"
EndSection
Section "InputDevice"
Identifier "Logitech V400"
Driver "evdev"
Option "Name" "Logitech USB Receiver"
EndSection
Section "Monitor"
Identifier "IBM TFT"
HorizSync 31.5 - 48.5
VertRefresh 50-70
EndSection
Section "Device"
Identifier "Intel 915GM"
Driver "i810"
VideoRam 131072
Option "DRI" "true"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "IBM ThinkPad"
Device "Intel 915GM"
Monitor "IBM TFT"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "IBM ThinkPad"
Option "AIGLX" "true"
InputDevice "IBM Trackpoint" "CorePointer"
InputDevice "IBM AT Keyboard" "CoreKeyboard"
InputDevice "Logitech V400" "SendCoreEvents"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
|
_________________ Just you and me strogg! |
|
Back to top |
|
|
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Tue Feb 20, 2007 12:46 pm Post subject: Geht garnix :( |
|
|
Ich hab gestern mal layman installiert und alles upgraded mit dem xeffects overlay...
Infos:
Code: | gentoo ~ # eselect opengl list
Available OpenGL implementations:
[1] nvidia *
[2] xorg-x11
gentoo ~ #
|
Code: | gentoo ~ # equery l beryl
[ Searching for package 'beryl' in all categories among: ]
* installed packages
[I--] [ ~] x11-misc/beryl-manager-0.1.9999.2 (0)
[I--] [ ~] x11-misc/beryl-settings-0.1.9999.2 (0)
[I--] [ ~] x11-misc/beryl-settings-bindings-0.1.9999.2 (0)
[I--] [ ~] x11-plugins/beryl-plugins-0.1.9999.2 (0)
[I--] [ ~] x11-wm/beryl-0.1.9999.2 (0)
[I--] [ ~] x11-wm/beryl-core-0.1.9999.2 (0)
gentoo ~ #
|
Code: | gentoo ~ # equery l nvidia
[ Searching for package 'nvidia' in all categories among: ]
* installed packages
[I--] [ ~] media-video/nvidia-settings-1.0.20061102 (0)
[I--] [ ~] x11-drivers/nvidia-drivers-1.0.9746 (0)
gentoo ~ #
|
Code: |
gentoo ~ # equery l gentoo-sources
[ Searching for package 'gentoo-sources' in all categories among: ]
* installed packages
[I--] [ ~] sys-kernel/gentoo-sources-2.6.20 (2.6.20)
gentoo ~ #
|
Code: | gentoo ~ # equery l xorg-server
[ Searching for package 'xorg-server' in all categories among: ]
* installed packages
[I--] [ ] x11-base/xorg-server-1.1.1-r4 (0)
gentoo ~ # |
Code: | gentoo ~ # glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce 6200/PCI/SSE/3DNOW!
GL_NVX_conditional_render, GL_SGIS_generate_mipmap, GL_SGIS_texture_lod,
gentoo ~ #
|
Code: | gentoo ~ # cat /etc/X11/xorg.conf
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
# FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5" #6 7
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Radeon 9200"
Driver "nvidia"
# Option "XAANoOffscreenPixmaps" "true"
Option "AddARGBGLXVisuals" "true"
Option "DRI" "true"
Option "NvAgp" "1"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon 9200"
Monitor "My Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
gentoo ~ # |
Rendering Path hab ich testweise auf Texture From Pixmap gestellt....
Aber es ruckelt noch immer wie blöde und wenn ich fenster öffne sind die kurz schwarz... |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5232
|
Posted: Tue Feb 20, 2007 12:51 pm Post subject: |
|
|
Also Load dri in der xorg.conf ist im zusammenhang mit den nvidia treibern falsch. Denn diese Treiber untersützen das dri Interface nicht sondern bieten ein eigenes an.
Desweiteren würde ich dir raten deine xorg.conf etwas aufzuräumen sprich nicht benötigte elemente löschen, das macht das ganze übersichtlicher. _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Tue Feb 20, 2007 12:54 pm Post subject: |
|
|
Beryl Benchmark zeigt mir knapp 120FPS an wenn ich keine Fenster offen hab!
Sobald ich z.B. Mozilla starte hab ich nur noch 50 - 55 FPS!!!!
@firefly hab gerade aufgeräumt... |
|
Back to top |
|
|
think4urs11 Bodhisattva
Joined: 25 Jun 2003 Posts: 6659 Location: above the cloud
|
Posted: Tue Feb 20, 2007 1:27 pm Post subject: |
|
|
Die 120 erscheinen mir schon sehr niedrig, ich habe hier mit einer onboard Intel GMA950 schon ca. 215; mit FF+laufendem Video im Untergrund ~170 _________________ Nothing is secure / Security is always a trade-off with usability / Do not assume anything / Trust no-one, nothing / Paranoia is your friend / Think for yourself |
|
Back to top |
|
|
Vortex375 Veteran
Joined: 03 Mar 2005 Posts: 1739 Location: Deutschland
|
Posted: Tue Feb 20, 2007 2:37 pm Post subject: |
|
|
Mein beryl-Benchmark zeigt konstant 50fps an, die gehen auch nicht runter wenn ich viele Fenster öffne oder das Show-Desktop-Feature benutze. |
|
Back to top |
|
|
firefly Watchman
Joined: 31 Oct 2002 Posts: 5232
|
Posted: Tue Feb 20, 2007 3:35 pm Post subject: |
|
|
Vortex375 wrote: | Mein beryl-Benchmark zeigt konstant 50fps an, die gehen auch nicht runter wenn ich viele Fenster öffne oder das Show-Desktop-Feature benutze. |
eventuell vsync oder fps-limit eingeschaltet _________________ Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
Back to top |
|
|
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Tue Feb 20, 2007 3:55 pm Post subject: |
|
|
Also ich hab jetzt folgendes probiert!!!
AMD Sempron 2500+
1GB DDR PC 333
MSI KT333
SCSI Platte
GeForce 6200
Und mein Gentoo... Ich hab trotzdem NUR 120FPS!!!
Wenn nebenbei noch compiliert wird fällt das ganze auf 13 FPS!!!! |
|
Back to top |
|
|
root_tux_linux l33t
Joined: 21 Dec 2003 Posts: 966
|
Posted: Wed Feb 21, 2007 5:03 am Post subject: |
|
|
Also
Beryl und Xorg.conf genau gleich eingestellt under Arch und Gentoo!!!
Gentoo & Arch mit GeForce 6200 maximal 130 FPS!!!
Gentoo & Arch mit FX 5200 maximal 130 FPS!!!
Gentoo & Arch mit GeForce 6800 maximal 1380 FPS!!!
Die GF 6200 ist einiges "stärker" als die FX 5200 wieso zum teufel haben die gleich viel FPS? |
|
Back to top |
|
|
SvenFischer Veteran
Joined: 05 Feb 2003 Posts: 1033 Location: Berlin
|
Posted: Wed Feb 21, 2007 8:14 am Post subject: |
|
|
Ähm,
wo bitte finde ich dieses "beryl-benchmark"? _________________ Core2Duo, 4GB RAM, AMD/ATI 4850 and nice person in front! |
|
Back to top |
|
|
sceptiq Tux's lil' helper
Joined: 29 Nov 2004 Posts: 103
|
Posted: Wed Feb 21, 2007 8:26 am Post subject: |
|
|
beryl-settings > extras > Benchmark |
|
Back to top |
|
|
hoschi Advocate
Joined: 19 Jul 2003 Posts: 2517 Location: Ulm, Germany, Europe
|
Posted: Wed Feb 21, 2007 11:56 am Post subject: |
|
|
Benchmark: Ich denke da ein GLXGEARS und 3DMurksMark2010
...und starte ein Quake3-Timedemo _________________ Just you and me strogg! |
|
Back to top |
|
|
think4urs11 Bodhisattva
Joined: 25 Jun 2003 Posts: 6659 Location: above the cloud
|
Posted: Thu Feb 22, 2007 10:53 am Post subject: |
|
|
kleine Beobachtung am Rande:
Wenn dbus mitläuft bricht bei mir die Framerate im beryl bench auf ca. 1/3 ein (50-60 fps ggü. 200-210 fps) gegenüber den Werten ohne aktives dbus.
Kann das jemand bestätigen? Oder noch besser hat jemand eine Lösung dafür? _________________ Nothing is secure / Security is always a trade-off with usability / Do not assume anything / Trust no-one, nothing / Paranoia is your friend / Think for yourself |
|
Back to top |
|
|
Louisdor Veteran
Joined: 14 Dec 2003 Posts: 1231 Location: im Brandenburgischen
|
Posted: Thu Feb 22, 2007 5:36 pm Post subject: |
|
|
Ich habe eine NX7600GS-T2D256EH mit 256MB und immer so ca. 75fps
Ciao,
aleX! _________________ "Ich bin ich." |
|
Back to top |
|
|
|