| View previous topic :: View next topic |
| Author |
Message |
JoKo
Tux's lil' helper
Joined: 16 May 2004
Posts: 141
Location: Xanthi, Greece
|
 Posted: Tue Feb 27, 2007 1:21 pm Post subject: Experimental ATA drivers and CD-RW erasing [solved] |
 |
|
Hi,
Since 2.6.20 I've started using the experimental ATA drivers. As a result, there are no longer hd* devices, only sd* and sr*. Since now I've never had any trouble writing DVDs in k3b.
However, I've now realized that I can't erase any CD-RW. Here's the debugging output:
| Code: | cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=5,0,0 speed=10 -tao driveropts=burnfree -eject blank=fast -force
cdrecord
-----------------------
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
/usr/bin/cdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot open SCSI driver.
/usr/bin/cdrecord: For possible targets try 'cdrecord -scanbus'.
/usr/bin/cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Cdrecord-ProDVD-Clone 2.01.01a10 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 1 = CD-ROM |
The device node is located at /dev/sr0 and nForce 4 is the chipset.
Is anyone experiencing the same problem?
Last edited by JoKo on Tue Feb 27, 2007 1:56 pm; edited 1 time in total |
|
| Back to top |
|
 |
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Tue Feb 27, 2007 1:23 pm Post subject: |
|
|
Can you post your PATA-SATA section, because I don't have any problems with that.
| Code: |
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
|
|
|
| Back to top |
|
|
JoKo
Tux's lil' helper
Joined: 16 May 2004
Posts: 141
Location: Xanthi, Greece
|
| Posted: Tue Feb 27, 2007 1:56 pm Post subject: |
|
|
Thanks a lot for your reply, d2_racing.
Apparently, I hadn't enabled SCSI generic support (CONFIG_CHR_DEV_SG). Now I can erase my CD-RWs successfully, thanks again! |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Tue Feb 27, 2007 6:24 pm Post subject: |
|
|
| JoKo wrote: | Thanks a lot for your reply, d2_racing.
Apparently, I hadn't enabled SCSI generic support (CONFIG_CHR_DEV_SG). Now I can erase my CD-RWs successfully, thanks again! |
No problem  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
