| View previous topic :: View next topic |
| Author |
Message |
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
 Posted: Wed Mar 07, 2007 10:55 pm Post subject: XGL+beryl-svn+FGLRX |
 |
|
Hi, yesterday i installed FGLRX 8.28 (old) on a radeon 9200 (r250) then i installed XGL from xeffects. I was using beryl before using AIGLX on an intel 865G and it was working fine. Now, when i start XGL, i get an ****ing slow display and nothing seem to work fine. In windows mode, it was working almost fine, but without WM. Here is the output of beryl-xgl
| Code: | *****
* Beryl system compatibility check *
**************************************************************
Detected xserver : XGL
Checking Display :1.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
libberylsettings: dlsym: /usr/lib/beryl/libbench.so: undefined symbol: getCompPluginInfo
beryl-xgl: Support for non power of two textures missing
beryl-xgl: Failed to manage screen: 0
beryl-xgl: No manageable screens found on display :1.0
[1]+ Exit 1 beryl-xgl
|
FGLRXinfo
| Code: | Xlib: connection to ":0.0" refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
Error: unable to open display :0
|
but in normal mode (startx) it work fine, with 3d accel using ATI opengl (not xorg-x11 ou dri)
I read o some ubuntu forum that the last RC of beryl was not working at all with FGLRX but svn had fixed the bug. I am now using the svn from xeffect but it give the same output. I also tried 0.1.4 the is "suppose" to work fine, but it dont. Any tips? |
|
| Back to top |
|
 |
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Thu Mar 08, 2007 8:09 pm Post subject: |
|
|
BUMP...
here is fglrxinfo in normal startx
| Code: | display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9250/9200 Series DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)
|
glxinfo
| Code: | name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9250/9200 Series DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
GL_S3_s3tc, GL_ARB_occlusion_query, GL_ARB_point_parameters,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_vertex_blend, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_window_pos, GL_ATI_element_array,
GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_map_object_buffer,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATI_vertex_array_object, GL_ATI_vertex_attrib_array_object,
GL_ATI_vertex_streams, GL_ATIX_texture_env_combine3,
GL_ATIX_texture_env_route, GL_ATIX_vertex_shader_output_point_size,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_stencil_wrap, GL_EXT_texgen_reflection, GL_EXT_texture3D,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
|
dmesg
| Code: | Linux version 2.6.19-reiser4-r2-fglrx (root@localhost) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #3 SMP Tue Mar 6 17:39:02 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4e50
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 GBT ) @ 0x000f67f0
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6f00
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 2612.710 MHz processor.
Built 1 zonelists. Total pages: 260081
Kernel command line: root=/dev/hda4 video=vesafb:1024x768-32@70,mtrr,ywrap splash=silent,fadein,theme:fingerprint-bs quiet CONSOLE=/dev/tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033132k/1048512k available (2971k kernel code, 14680k reserved, 1275k data, 232k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc059b000 - 0xc05d5000 ( 232 kB)
.data : 0xc03e6f08 - 0xc0525df4 (1275 kB)
.text : 0xc0100000 - 0xc03e6f08 (2971 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5227.21 BogoMIPS (lpj=2613605)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 530 Objects with 55 Devices 161 Methods 27 Regions
ACPI Namespace successfully loaded at root c0601390
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5224.36 BogoMIPS (lpj=2612183)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Total of 2 processors activated (10451.57 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=54
checking if image is initramfs... it is
Freeing initrd memory: 252k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfae70, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..................................................................
Initialized 26/27 Regions 9/9 Fields 21/21 Buffers 10/11 Packages (539 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 60 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fa000000-fa0007ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: f8000000-f9ffffff
PREFETCH window: e8000000-f7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: fa000000-fa0fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Loading Reiser4. See www.namesys.com for a description of Reiser4.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
intel_rng: FWH not detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xe0000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17
e100: eth0: e100_probe: addr 0xfa001000, irq 17, MAC addr 00:0D:61:32:D8:34
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
PPP generic driver version 2.4.2
netconsole: not configured, aborting
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L120AVV207-1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[20000000030016f2]
hdc: HL-DT-ST RW/DVD GCC-4520B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: Host Protected Area detected.
current capacity is 241252607 sectors (123521 MB)
native capacity is 241254720 sectors (123522 MB)
hda: Host Protected Area disabled.
hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
3ware Storage Controller device driver for Linux v1.26.02.001.
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfa100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000c400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000c800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4811
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Basic Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S1 S4 S5)
input: AT Translated Set 2 keyboard as /class/input/input1
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input2
reiser4: hda4: found disk format 4.0.0.
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 232k freed
scsi 0:0:0:0: Direct-Access HP PSC 1610 1.00 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50750 usecs
intel8x0: clocking to 48000
Adding 1028120k swap on /dev/hda6. Priority:-1 extents:1 across:1028120k
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] total GART = 134217728
[fglrx] free GART = 118222848
[fglrx] max single GART = 118222848
[fglrx] total LFB = 128970752
[fglrx] free LFB = 122679296
[fglrx] max single LFB = 122679296
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
vmmon: no version magic, tainting kernel.
/dev/vmmon[5002]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[5002]: Module vmmon: initialized
vmnet: no version magic, tainting kernel.
/dev/vmnet: open called by PID 5034 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 5060 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
/dev/vmnet: open called by PID 5486 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 5485 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 5518 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 5517 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
atkbd.c: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e057 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e057 <keycode>' to make it known.
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
|
xgl version
| Code: | * x11-base/xgl
Latest version available: 0.0.1_pre20070105
Latest version installed: 0.0.1_pre20070105
Size of files: 8,376 kB
Homepage: http://xorg.freedesktop.org/
Description: XGL X server
License: X11
|
beryl version (svn from yesterday)
| Code: | Searching...
[ Results for search key : beryl ]
[ Applications found : 10 ]
* kde-misc/kberylsettings
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl Settings Manager for KDE (svn)
License: GPL-2
* x11-misc/beryl-manager
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Manager (svn)
License: GPL-2
* x11-misc/beryl-settings
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Settings (svn)
License: GPL-2
* x11-misc/beryl-settings-bindings
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Settings Bindings (svn)
License: GPL-2
* x11-plugins/beryl-dbus
Latest version available: 0.1.4
Latest version installed: [ Not Installed ]
Size of files: 226 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Dbus Plugin
License: GPL-2
* x11-plugins/beryl-plugins
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Plugins (svn)
License: GPL-2
* x11-plugins/beryl-plugins-unsupported
Latest version available: 0.1.9999.2
Latest version installed: [ Not Installed ]
Size of files: 354 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Unsupported Plugins
License: GPL-2
* x11-plugins/beryl-plugins-vidcap
Latest version available: 0.1.9999.2
Latest version installed: [ Not Installed ]
Size of files: 21 kB
Homepage: http://beryl-project.org
Description: Beryl Window Decorator Vidcap Plugin
License: GPL-2
* x11-wm/beryl
Latest version available: 9999
Latest version installed: 9999
Size of files: 0 kB
Homepage: http://beryl-project.org
Description: Beryl window manager for AiGLX and XGL (meta)
License: GPL-2
* x11-wm/beryl-core
Latest version available: 9999
Latest version installed: 9999
Size of files: 789 kB
Homepage: http://beryl-project.org
Description: Beryl window manager for AIGLX and XGL (svn)
License: GPL-2
|
|
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Fri Mar 09, 2007 4:59 pm Post subject: |
|
|
bump...
i hate bumping |
|
| Back to top |
|
|
meisterlampe
n00b
Joined: 02 Jun 2004
Posts: 23
|
| Posted: Thu Mar 15, 2007 11:09 am Post subject: |
|
|
got the same symptoms... just want you to know...
vlg karl |
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Fri Mar 16, 2007 1:41 am Post subject: |
|
|
| Ok, beryl 0.1.1 load, but it incredibly slow. Just for an exemple, the UI of kcontrol take 1 minute just to display. Every single line are loaded one by one. When i start screensaver, i get 40 fps. So accel work, but only in game or screen saver. In XGL desktop, just nothing work. Any tips? |
|
| Back to top |
|
|
Mad Merlin
Veteran
Joined: 09 May 2005
Posts: 1155
|
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Fri Mar 16, 2007 2:17 am Post subject: |
|
|
| for beryl, yes definitely , but i also want to do 3d and play game, for that the open source driver is not really good. |
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Sat Mar 17, 2007 11:45 pm Post subject: |
|
|
| up |
|
| Back to top |
|
|
asg719
n00b
Joined: 13 Nov 2003
Posts: 61
Location: Manitou Springs, CO
|
| Posted: Sun Mar 18, 2007 9:58 pm Post subject: |
|
|
| Get rid of XGL and use the open source radeon driver with AIGLX. The 9200 has pretty good open source drivers |
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Sat Mar 24, 2007 9:00 pm Post subject: |
|
|
| it is too slow in game, i use them on my laptop (same card) and it work fine, but i can only use ogl 1.2 and some apps just crash because of incompatibility (mainly games). i want to solve my probpem with xgl. |
|
| Back to top |
|
|
Elv13
Guru
Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America
|
| Posted: Tue Apr 10, 2007 10:53 pm Post subject: |
|
|
Bump.
Actually, beryl load, but a 0.1fps it is not very usefull. I dont know what to do, both composite extension are disable in xorg.conf, i use a simillar xorg.conf to the one i made for my friend when i install ubuntu+beryl on his computer and it still dont work at all!
Someone have an idea why i only get 0.1fps and beryl load? |
|
| Back to top |
|
|
teh-steve
n00b
Joined: 28 Jan 2005
Posts: 27
Location: Worcester
|
| Posted: Tue Apr 10, 2007 11:40 pm Post subject: |
|
|
I have a Radeon 9000 Mobility in my laptop. I tried to use XGL the other day and it was very, very slow. I tried the newest version of X.org with AIGLX and it worked infinitely better. It plays games just fine, too. I'm using the open-source DRI drivers.
I'm not sure why XGL is so slow. I didn't try it with the official ATi driver, but I doubt it would be much better. |
|
| Back to top |
|
|
VanDan
Guru
Joined: 30 Sep 2002
Posts: 586
Location: Australia
|
| Posted: Wed Apr 11, 2007 3:19 am Post subject: |
|
|
Which game are you talking about?
_________________
David Hicks' plea. Was it:
a) I plead guilty, or
b) Please let me out of here and end the torture |
|
| Back to top |
|
|
givemesugarr
n00b
Joined: 11 Mar 2007
Posts: 5
|
| Posted: Mon May 07, 2007 5:05 pm Post subject: |
|
|
| for what i have read on phoronix ati doesn't support the 9200 chipsets and released all the specs to the opensource community, so that the opensource drivers (not the radeon, but the xf86-ati drivers which have to be downloaded separately) have good support for this board.... now, try aixgl with these drivers and see if it works (according to phoronix it should definitely work).... the performance of the opensource drivers with old ati unsupported drivers are very close or even better than the old ati fglrx package.... |
|
| Back to top |
|
|
VanDan
Guru
Joined: 30 Sep 2002
Posts: 586
Location: Australia
|
| Posted: Mon May 07, 2007 10:41 pm Post subject: |
|
|
| givemesugarr wrote: | | for what i have read on phoronix ati doesn't support the 9200 chipsets and released all the specs to the opensource community |
I hate to nitpick, but they didn't release all the specs ... they released most stuff for the 3D engine. They left out some 3D stuff like controlling their 'hyper-Z' functionality. They were also silent on tv-out and the later Rage Theatre chip ( for video input ).
But getting back to the original topic, you'll certainly get more milage out of the radeon driver than the latest fglrx driver you can use ( before they pulled r200 support ). I've got beryl running on an old Athlon 2800XP with a 9200 card with 64MB, and it flies 
_________________
David Hicks' plea. Was it:
a) I plead guilty, or
b) Please let me out of here and end the torture |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
