| View previous topic :: View next topic |
| Author |
Message |
faceman
Apprentice
Joined: 10 Jan 2005
Posts: 200
Location: inter terram et caelo
|
 Posted: Fri Mar 09, 2007 12:49 pm Post subject: need really quick modem help {SOLVED} |
 |
|
I'm moving tomorrow, and I'll have to use dialup for internet.
I got a Best Data USB HARDWARE CONTROLLER modem, and I installed wvdial, but it doesn't detect it. I assume it's because it only looks for pci modems?
Anyway, I just need some really quick help getting this thing working before I move, otherwise I'm internetless for a while, and it will be even more difficult to get it to work.
Any help would be appreciated.
By the way, it does show up with lsusb, and it creates a dev node ttyACM0 (it goes away when I unplug it).
_________________
www.impressusart.com
Last edited by faceman on Fri Mar 09, 2007 1:32 pm; edited 1 time in total |
|
| Back to top |
|
 |
faceman
Apprentice
Joined: 10 Jan 2005
Posts: 200
Location: inter terram et caelo
|
| Posted: Fri Mar 09, 2007 12:56 pm Post subject: |
|
|
update:
I've got this doing autodetect from gnome-ppp (wvdial front-end):
| Code: | basilio facemyer # gnome-ppp
WVCONF: /root/.wvdial.conf
GNOME PPP: STDOUT: Editing `/dev/null'.
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Scanning your serial ports for a modem.
GNOME PPP: STDOUT:
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.GNOME PPP: STDERR: ttyS2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyS2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.GNOME PPP: STDERR: Modem Port Scan<*1>: S3 ACM0
GNOME PPP: STDOUT:
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Sorry, no modem was detected! Is it in use by another program?
GNOME PPP: STDOUT: Did you configure it properly with setserial?
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Please read the FAQ at http://open.nit.ca/wiki/?WvDial
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
|
I'm looking at the FAQ now...help?
[EDIT]
I don't understand why it can't open the device. I've got usb modem support built into my kernel, the node shows up when I plug in the modem.
| Code: | | minicom: cannot open /dev/ttyACM0: Input/output error |
_________________
www.impressusart.com |
|
| Back to top |
|
|
faceman
Apprentice
Joined: 10 Jan 2005
Posts: 200
Location: inter terram et caelo
|
| Posted: Fri Mar 09, 2007 1:32 pm Post subject: |
|
|
Somehow it works now - wvdialconf detected it, although it would not before, and it dials.
_________________
www.impressusart.com |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
