kevintshaver
n00b
Joined: 14 Feb 2006
Posts: 49
|
 Posted: Sat Mar 10, 2007 4:01 pm Post subject: USB and DVD Problems |
 |
|
I can't figure this out. Any help would be appreciated. I want the my Sony DW-Q30A DVD+RW device to be hooked up via a usb 2.0 cable. However, when attempting to use it I get the following error shown below. I get this error when playing back a dvd. I also get the error if I try to rip it to the hard drive using either dvdbackup or something like | Code: | | cat VTS_01_VOB VTS_01_02.VOB VTS_01_03.VOB > /movie.VOB |
I have two of these drives and both give the similar errors. Different cables and different usb hubs give a similar error. Different DVDs give similar errors. I even get the error when trying uhci instead of ehci. The drives work when hooked up via ide cable. I've been saying " similar" error because the sector, block numbers, and number of errors change if you try to repeat it with the same dvd. It must fail at different places each time.
| Code: |
sr 2:0:0:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x5
end_request: I/O error, dev sr0, sector 6846516
printk: 50 messages suppressed.
Buffer I/O error on device sr0, logical block 1711629
Buffer I/O error on device sr0, logical block 1711630
Buffer I/O error on device sr0, logical block 1711631
Buffer I/O error on device sr0, logical block 1711632
Buffer I/O error on device sr0, logical block 1711633
Buffer I/O error on device sr0, logical block 1711634
Buffer I/O error on device sr0, logical block 1711635
Buffer I/O error on device sr0, logical block 1711636
Buffer I/O error on device sr0, logical block 1711637
Buffer I/O error on device sr0, logical block 1711638
sr 2:0:0:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x5
end_request: I/O error, dev sr0, sector 6849636
printk: 50 messages suppressed.
Buffer I/O error on device sr0, logical block 1712409
Reducing readahead size to 256K
sr 2:0:0:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x5
end_request: I/O error, dev sr0, sector 8389112
printk: 59 messages suppressed.
Buffer I/O error on device sr0, logical block 2097278
Buffer I/O error on device sr0, logical block 2097279
Reducing readahead size to 256K
end_request: I/O error, dev sr0, sector 3716748
printk: 58 messages suppressed.
Buffer I/O error on device sr0, logical block 929187
Buffer I/O error on device sr0, logical block 929188
Buffer I/O error on device sr0, logical block 929189
Buffer I/O error on device sr0, logical block 929190
Buffer I/O error on device sr0, logical block 929191
Buffer I/O error on device sr0, logical block 929192
Buffer I/O error on device sr0, logical block 929193
Buffer I/O error on device sr0, logical block 929194
Buffer I/O error on device sr0, logical block 929195
Buffer I/O error on device sr0, logical block 929196
Reducing readahead size to 256K
end_request: I/O error, dev sr0, sector 5813836
end_request: I/O error, dev sr0, sector 5813836
end_request: I/O error, dev sr0, sector 7910924
end_request: I/O error, dev sr0, sector 7910924
end_request: I/O error, dev sr0, sector 10008012
end_request: I/O error, dev sr0, sector 10008012
end_request: I/O error, dev sr0, sector 12105228
end_request: I/O error, dev sr0, sector 12105468
end_request: I/O error, dev sr0, sector 12105228
drivers/usb/input/hid-core.c: submitting ctrl urb: Set_Report wValue=0x0200 wIndex=0x0000 wLength=1
drivers/usb/input/hid-core.c: submitting ctrl urb: Set_Report wValue=0x0200 wIndex=0x0000 wLength=1
|
lsusb -v for the host controller, hub, and usb/ide adpater
| Code: |
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.21-rc3-mm2 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xec 0x36
PortPwrCtrlMask 0x05 0x08
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Bus 001 Device 004: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04b4 Cypress Semiconductor Corp.
idProduct 0x6830 USB-2.0 IDE Adapter
bcdDevice 0.01
iManufacturer 56 Cypress Semiconductor
iProduct 78 USB2.0 Storage Device
iSerial 100 DEF1084691E2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0606
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0xec
PortPwrCtrlMask 0x36
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0303 lowspeed power enable connect
Port 4: 0000.0303 lowspeed power enable connect
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
|
usb part of lspci -v
| Code: |
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b76
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at fe00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b76
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at fd00 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b76
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at fc00 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b76
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at fb00 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b76
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
|
|
|
Kernel & Hardware
