Gentoo Forums :: View topic - Xgl will not start with Beryl

Xgl will not start with Beryl

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

Unsupported Software

View previous topic :: View next topic

Author

Message

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Tue Mar 13, 2007 8:56 am Post subject: Xgl will not start with Beryl

Hello all,
Made an attempt at installing Xgl with Beryl, fallowed the Gentoo-Wiki as best I could, and I still cant seem to get Xgl to show. It seems that Beryl will work fine, just as long as Xgl can catch up. I log into the computer and type in "startxgl". The final result when it is done loading is that the Desktop is still 2d, with Beryl running (red diamond is in the top-right corner or screen). Here is a copy of my Xorg.conf file...

Code:

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection

Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection

Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
Load "synaptics"
Load "GLcore"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "TouchPad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mouse1"
Option "SHMConfig" "on"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "0"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.60"
Option "MaxSpeed" "1.10"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "TouchpadOff" "2"
EndSection

Section "Monitor"
Identifier "Monitor0"
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
EndSection

Section "Device"
Identifier "ATIx600"
Driver    "fglrx"
VendorName "ATI"
Option    "RenderAccel" "true"
Option    "AllowGLXWithComposite" "false"
Option    "no_accel" "off"
Option    "no_dri" "off"
Option    "UseFastTLS" "2"
Option    "XAANoOffscreenPixmaps" "true"
Option    "DRI" "true"
Option    "UseInternalAGPGART" "no"
Option    "KernelModuleParm" "agplock=0"
Option    "TripleBuffer" "true"
Option    "VideoOverlay" "true"
Option    "OpenGLOverlay" "off"
EndSection

Section "Screen"
Identifier "Screen0"
Device "ATIx600"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
SubSection "Display"
   Viewport 0 0
   Depth 24
   Modes "1680x1050_60.00" "1400x900"
EndSubSection
SubSection "Display"
   Viewport 0 0
   Depth 16
   Modes "1680x1050_60.00" "1400x900" "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "TouchPad" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
Option    "AIGLX"    "false"
EndSection

I think that if I can just get AIGLX and Composite to stay disabled, I will be in the clear. Please, let me know what I am doing wrong on this, any and all help is much appreciated, thank you in advance. Will include Xorg.0.log in next post.

System: Dell Latitude D810
Intel Pentium M 2.0Ghz
1 Gig of RAM
ATI x600
80GB hard drive

Last edited by jimmathy on Tue Mar 13, 2007 9:08 am; edited 1 time in total

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Tue Mar 13, 2007 9:02 am Post subject:

/var/log/Xorg.0.log

Code:

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.19-gentoo-r5 #4 SMP Thu Mar 8 22:22:00 PST 2007 i686
Build Date: 09 March 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 11 22:23:18 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATIx600"
(**) |-->Input Device "TouchPad"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,0186 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,0186 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,0186 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,0186 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,0186 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,0186 rev 03 class 01,01,80 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 1028,2002 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,1677 card 1028,0186 rev 01 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 104c,8036 card 2000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 03:01:5: chip 104c,8038 card 1028,0186 rev 00 class 07,80,00 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2721 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,7), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdfb00000 - 0xdfbfffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x50000000 - 0x51ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x50000000 - 0x51ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600] rev 0, Mem @ 0xd0000000/27, 0xdfdf0000/16, I/O @ 0xde00/8, BIOS @ 0xdfe00000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[1] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[2] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[3] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[11] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[12] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[13] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[16] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[17] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[18] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[19] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[20] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[21] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[22] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[23] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[1] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[2] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[3] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[11] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[12] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[13] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[16] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[17] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[18] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[19] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[20] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[21] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[22] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[23] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[5] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[6] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[7] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[8] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[9] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[11] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[22] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[23] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[24] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[25] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[26] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[27] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[28] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[29] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.32.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) ATI Radeon/FireGL: The following chipsets are supported:
ATI MOBILITY RADEON X600 (M24 3150), ATI FireMV 2400 (M24 3151),
ATI MOBILITY RADEON X300 (M22 (HP) 3152),
ATI MOBILITY FireGL V3200 (M24 GL 3154),
RADEON X600/X550 Series (RV380 3E50),
ATI FireGL V3200 (RV380 GL 3E54), RADEON 9500 (RADEON 9500 4144),
RADEON 9600TX (RADEON 9600TX 4146), ATI FireGL Z1 (FireGL Z1 4147),
RADEON 9800 SE (RADEON 9800 SE 4148), RADEON 9500 (RADEON 9500 4149),
ATI RADEON 9600 Series (RV350 4150),
ATI RADEON 9600 Series (RV350 SE 4151),
ATI RADEON 9600 Series (RV360 4152), ATI RADEON 9550 (RV350 LX 4153),
ATI FireGL T2 (FireGL T2 4154),
ATI RADEON 9600 Series (RV351 P 4155),
RADEON X800 Series (R420 4A48 4A48),
RADEON X800 PRO (R420 4A49 4A49), RADEON X800 Series (R420 SE 4A4A),
RADEON X800 XT (R420 XT 4A4B), RADEON X800 Series (R420 4A4C 4A4C),
ATI FireGL X3-256 (R420 GL 4A4D),
ATI MOBILITY RADEON 9800 (M18-P 4A4E), RADEON X800 SE (R420 8P 4A4F),
RADEON X800 XT Platinum Edition (R420 XT Platinum 4A50),
RADEON X800 VE (R420 4P 4A54),
ATI RADEON X850 Consumer (R481 4P 4B48),
ATI RADEON X850 XT (R481 XT 4B49), ATI RADEON X850 SE (R481 SE 4B4A),
ATI RADEON X850 PRO (R481 Pro 4B4B),
ATI RADEON X850 XT Platinum Edition (R481 XT Platinum Edition 4B4C),
RADEON 9700 PRO (RADEON 9700 PRO 4E44),
RADEON 9500 PRO / 9700 (RADEON 9500 PRO / 9700 4E45),
RADEON 9600 TX (RADEON 9600 4E46), ATI FireGL X1 (FireGL X1 4E47),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350LE 4E49),
RADEON 9800 XT (R360 4E4A),
ATI FireGL X2-256/X2-256t (FireGL X2 4E4B),
ATI MOBILITY RADEON 9600/9700 Series (M10-P 4E50),
ATI RADEON 9600 Series (RV350 LE 4E51),
ATI MOBILITY RADEON 9500 (M11-CL 4E52),
ATI MOBILITY FIRE GL T2/T2e (M10-GL 4E54),
ATI MOBILITY RADEON 9550 (M12-P 4E56),
ATI MOBILITY RADEON X300 (M22 5460),
ATI MOBILITY RADEON X300 (M22T 5461),
ATI MOBILITY RADEON X600 SE (M24-C 5462),
ATI MOBILITY FireGL V3100 (M22 GL 5464),
RADEON X800 Series (R423 5548), RADEON X800 GTO (R423 PRO 5549),
RADEON X800 XT Platinum Edition (R423 XT Platinum 554A),
RADEON X800 GT (R423 SE 554B), R430 XTP (R430 XTP 554C),
ATI RADEON X800 XL (R430 XT 554D), ATI RADEON X800 GT (R430 SE 554E),
RADEON X800 GTO (R430 PRO 554F), ATI FireGL V7100 (R423 GL XT 5550),
ATI FireGL V5100 (R423 GL - PRO2 5551), R430 GL XT (R430 GL XT 5554),
R430 GL PRO (R430 GL PRO 5555),
ATI MOBILITY FireGL V5000 (M26-CSP128GL 564A),
ATI MOBILITY FireGL V5000 (M26-GL 564B),
ATI MOBILITY RADEON X700 XL (M26-XC 564F),
ATI MOBILITY RADEON X700 (M26-CSP128 5652),
ATI MOBILITY RADEON X700 (M26-X 5653),
Radeon X700 Series (RV410 (5657) 5657),
ATI Radeon Xpress Series (RS480 5954 Generic 5954),
ATI Radeon Xpress Series (RS480 5955 Generic 5955),
ATI Radeon Xpress Series (RS482 5974 Generic 5974),
ATI Radeon Xpress Series (RS482 5975 Generic 5975),
ATI Radeon Xpress Series (RS400 5A41 Generic 5A41),
ATI Radeon Xpress Series (RS400 5A42 Generic 5A42),
ATI Radeon Xpress Series (RC410 5A61 Generic 5A61),
ATI Radeon Xpress Series (RC410 5A62 Generic 5A62),
RADEON X300/X550 Series (RV370 5B60),
RADEON X600 Series (RV380 (X) 5B62), RADEON X550 (RV370 XT 5B63),
ATI FireGL V3100 (RV370 GL V3100 5B64),
ATI FireMV 2200 (RV370 FireMV 2200 5B65), RV370X (RV370X 5B66),
ATI MOBILITY RADEON X800 XT (M28-XT 5D48),
ATI MOBILITY FireGL V5100 (M28 GL 5D49),
ATI MOBILITY RADEON X800 (M28-P 5D4A),
R480 Consumer 4P (R480 Consumer 4P 5D4C),
RADEON X850 XT Platinum Edition (R480 XTP 5D4D),
RADEON X800 GTO (R480 PRO 5D4F), ATI FireGL V7200 (R480 GL 16P 5D50),
R480 GL 12P (R480 GL 12P 5D51), RADEON X850 XT (R480 XT 5D52),
RADEON X800 XT (R423 XT 5D57), ATI FireGL V5000 (RV410 GL - 8P 5E48),
RADEON X700 XT (RV410 XT 5E4A), RADEON X700 PRO (RV410 PRO 5E4B),
RADEON X700 SE (RV410 SE (5E4C) 5E4C), RADEON X700 (RV410 LE 5E4D),
RADEON X700/X550 Series (RV410 SE (5E4F) 5E4F),
Radeon X1800 Series (R520 7100),
ATI Mobility Radeon X1800 XT (M58 16P 7101),
ATI Mobility Radeon X1800 (M58 12P 7102),
ATI MOBILITY FireGL V7200 (M58 GL 16P 7103),
ATI FireGL V7200 (R520 GL 16P 7104),
ATI FireGL V5300 (R520 GL 12P 7105),
ATI MOBILITY FireGL V7100 (M58 GL 12P 7106),
Radeon X1800 Series (R520 16P HiClk 7108),
Radeon X1800 Series (R520 16P 7109),
Radeon X1800 Series (R520 12P 710A),
Radeon X1800 Series (R520 8P 710B),
Radeon X1800 Series (R520 4P 710C),
ATI FireGL V7300 (R520 GL 16P 528 MB 710E),
ATI FireGL V7350 (R520 GL 16P 1 GB 710F),
Radeon X1600 Series (RV515 XT 7140),
Radeon X1300 Series (RV515 PRO 7142),
Radeon X1300 PRO (RV505 7143 7143), M54-GL (M54-GL 7144),
ATI Mobility Radeon X1400 (M54-P 7145),
Radeon X1300 Series (RV515 LE 7146),
Radeon X1300 Series (RV505 7147 7147),
ATI Mobility Radeon X1300 (M52 7149),
ATI Mobility Radeon X1300 (M52-T 714A),
ATI Mobility Radeon X1300 (M52 714B 714B),
ATI Mobility Radeon X1300 (M52 714C 714C),
Radeon X1300 Series (RV515 714D 714D),
Radeon X1300 Series (RV515LE PCI 714E),
ATI FireGL V3300 (RV515 GL 7152),
Radeon X1300 Series (RV515 VE 715E),
Radeon X1300 Series (RV505 715F 715F),
Radeon X1300 Series (RV516 7180 7180),
Radeon X1600 Series (RV516 XT 7181),
Radeon X1300 Series (RV516 7183 7183),
ATI Mobility Radeon X1450 (M64P 7186),
Radeon X1300 Series (RV516 7187 7187),
ATI Mobility Radeon X1450 (M64M 718A),
ATI Mobility Radeon X1350 (M62P 718B),
ATI Mobility Radeon X1350 (M62CSP64 718C),
ATI Mobility Radeon X1450 (M64CSP128 718D),
Radeon X1300 Series (RV516LE PCI 718F),
ATI Mobility Radeon X1350 (M62S 7196),
Radeon X1600 Series (RV530 XT 71C0),
Radeon X1650 Series (RV535 XT (71C1) 71C1),
Radeon X1600 Series (RV530 PRO 71C2),
Radeon X1300 Series (RV535 PRO (71C3) 71C3),
ATI MOBILITY FireGL V5200 (M56 GL 71C4),
ATI Mobility Radeon X1600 (M56-P 71C5),
Radeon X1650 Series (RV530 XT2 71C6),
Radeon X1650 Series (RV535 (71C7) 71C7),
Radeon X1600 Series (RV530 71CD 71CD),
Radeon X1300 Series (RV530 PRO2 71CE),
ATI FireGL V3400 (RV530 GL 128 MB 71D2),
ATI MOBILITY FireGL V5250 (M66 GL 71D4),
ATI Mobility Radeon X1700 (M66-P 71D5),
ATI Mobility Radeon X1700 XT (M66-XT 71D6),
ATI FireGL V5200 (RV530 GL 256 MB 71DA),
ATI Mobility Radeon X1700 (M66-M 71DE), RV550 (RV550 7200 7200),
Radeon X1950 Series (R580 7240 7240),
Radeon X1900 Series (R580 7243 7243),
Radeon X1950 Series (R580 7244 7244),
Radeon X1900 Series (R580 7245 7245),
Radeon X1900 Series (R580 7246 7246),
Radeon X1900 Series (R580 7247 7247),
Radeon X1900 Series (R580 7248 7248),
Radeon X1900 Series (R580 7249 7249),
Radeon X1900 Series (R580 724A 724A),
Radeon X1900 Series (R580 724B 724B),
Radeon X1900 Series (R580 724C 724C),
Radeon X1900 Series (R580 724D 724D),
ATI FireStream 2U (R580 724E 724E),
Radeon X1900 Series (R580 724F 724F),
Radeon X1950 Series (RV570 XT 7280),
ATI Mobility Radeon X1900 (M68 7284),
Radeon X1650 Series (RV560 XT 7291),
Radeon X1650 Series (RV560 7293 7293),
ATI Radeon Xpress 1200 Series (RS600 7941 Generic 7941),
ATI Radeon Xpress 1200 Series (RS600 7942 Generic 7942)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.32.5
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.32g1
(II) ATI Proprietary Linux Driver Build Date: Dec 12 2006 17:18:27
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.32.2.1.2.3-driver-lnx-x86-x86_64-313294
(--) Assigning device section with no busID to primary device
(--) Chipset ATI MOBILITY RADEON X600 (M24 3150) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[5] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[6] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[7] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[8] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[9] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[11] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[22] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[23] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[24] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[25] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[26] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[27] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[28] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[29] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81e56a8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[5] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[6] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[7] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[8] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[9] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[11] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[25] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[26] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[27] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[28] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[29] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[30] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[31] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[32] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "dri" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI MOBILITY RADEON X600 (M24 3150)" (Chipset = 0x3150)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2002)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfdf0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131008 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON (M24)
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P24
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(WW) fglrx(0): Failed to open DRM connection
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MS_ Model: 0 Serial#: 0
(II) fglrx(0): Year: 1990 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
(II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 119.2 MHz Image Size: 0 x 0 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1052 v_sync_end 1058 v_blanking: 1080 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3. 5 power states available:
(II) fglrx(0): 1. 398/263MHz @ 60Hz [enable load balancing]
(II) fglrx(0): 2. 100/122MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep]
(II) fglrx(0): 3. 105/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep, thermal diode mode]
(II) fglrx(0): 4. 209/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep]
(II) fglrx(0): 5. 209/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep, thermal diode mode]
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 13 modes found for primary display.
(--) fglrx(0): Virtual size is 1680x1050 (pitch 0)
(**) fglrx(0): *Mode "1680x1050_60.00": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050_60.00" 119.23 1680 1728 1760 1840 1050 1052 1058 1080
(**) fglrx(0): Default mode "1280x1024": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 119.23 1280 1528 1560 1840 1024 1039 1045 1080
(**) fglrx(0): Default mode "1280x800": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800" 119.23 1280 1528 1560 1840 800 927 933 1080
(**) fglrx(0): Default mode "1280x768": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768" 119.23 1280 1528 1560 1840 768 911 917 1080
(**) fglrx(0): Default mode "1024x768": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 119.23 1024 1400 1432 1840 768 911 917 1080
(**) fglrx(0): Default mode "800x600": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 119.23 800 1288 1320 1840 600 827 833 1080
(**) fglrx(0): Default mode "640x480": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 119.23 640 1208 1240 1840 480 767 773 1080
(**) fglrx(0): Default mode "640x400": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 119.23 640 1208 1240 1840 400 727 733 1080
(**) fglrx(0): Default mode "640x350": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350" 119.23 640 1208 1240 1840 350 702 708 1080
(**) fglrx(0): Default mode "512x384": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 119.23 512 1144 1176 1840 384 719 725 1080
(**) fglrx(0): Default mode "400x300": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 119.23 400 1088 1120 1840 300 827 833 1080 doublescan
(**) fglrx(0): Default mode "320x240": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 119.23 320 1048 1080 1840 240 767 773 1080 doublescan
(**) fglrx(0): Default mode "320x200": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 119.23 320 1048 1080 1840 200 727 733 1080 doublescan
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (106, 88)
(--) fglrx(0): Virtual size is 1680x1050 (pitch 1728)
(**) fglrx(0): *Mode "1680x1050_60.00": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050_60.00" 119.23 1680 1728 1760 1840 1050 1052 1058 1080
(**) fglrx(0): Default mode "1280x1024": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 119.23 1280 1528 1560 1840 1024 1039 1045 1080
(**) fglrx(0): Default mode "1280x800": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800" 119.23 1280 1528 1560 1840 800 927 933 1080
(**) fglrx(0): Default mode "1280x768": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768" 119.23 1280 1528 1560 1840 768 911 917 1080
(**) fglrx(0): Default mode "1024x768": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 119.23 1024 1400 1432 1840 768 911 917 1080
(**) fglrx(0): Default mode "800x600": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 119.23 800 1288 1320 1840 600 827 833 1080
(**) fglrx(0): Default mode "640x480": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 119.23 640 1208 1240 1840 480 767 773 1080
(**) fglrx(0): Default mode "640x400": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 119.23 640 1208 1240 1840 400 727 733 1080
(**) fglrx(0): Default mode "640x350": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350" 119.23 640 1208 1240 1840 350 702 708 1080
(**) fglrx(0): Default mode "512x384": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 119.23 512 1144 1176 1840 384 719 725 1080
(**) fglrx(0): Default mode "400x300": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 119.23 400 1088 1120 1840 300 827 833 1080 doublescan
(**) fglrx(0): Default mode "320x240": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 119.23 320 1048 1080 1840 240 767 773 1080 doublescan
(**) fglrx(0): Default mode "320x200": 119.2 MHz (scaled from 0.0 MHz), 64.8 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 119.23 320 1048 1080 1840 200 727 733 1080 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.32.5
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xdfbff000 - 0xdfbfffff (0x1000) MX[B]
[7] -1 0 0xdfbfe000 - 0xdfbfefff (0x1000) MX[B]
[8] -1 0 0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
[9] -1 0 0xdfcf0000 - 0xdfcfffff (0x10000) MX[B]
[10] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[11] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[12] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[13] -1 0 0xdfe00000 - 0xdfe1ffff (0x20000) MX[B](B)
[14] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[19] 0 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[28] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[29] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[30] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[31] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[32] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[33] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[34] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[35] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): Composite extension enabled, disabling direct rendering
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1728 x 7141
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
   32 128x128 slots
   32 256x256 slots
   16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) TouchPad auto-dev sets device to /dev/input/event2
(**) Option "Device" "/dev/input/event2"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "130"
(**) Option "RightEdge" "840"
(**) Option "TopEdge" "130"
(**) Option "BottomEdge" "640"
(**) Option "FingerLow" "7"
(**) Option "FingerHigh" "8"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "110"
(**) Option "EmulateMidButtonTime" "75"
(**) Option "VertScrollDelta" "20"
(**) Option "HorizScrollDelta" "0"
(**) Option "EdgeMotionMinSpeed" "200"
(**) Option "EdgeMotionMaxSpeed" "200"
(**) Option "UpDownScrolling" "1"
(**) Option "TouchpadOff" "2"
(**) Option "CircularScrolling" "1"
(**) Option "CircScrollTrigger" "2"
(--) TouchPad touchpad found
(**) Option "SendCoreEvents" "true"
(**) TouchPad: always reports core events
(**) Option "CorePointer"
(**) TouchPad: Core Pointer
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mouse2"
(**) Mouse0: Protocol: "auto"
(**) Option "AlwaysCore"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mouse2"
(EE) xf86OpenSerial: Cannot open device /dev/input/mouse2
No such file or directory.
(EE) Mouse0: cannot open input device
(EE) PreInit failed for input device "Mouse0"
(II) UnloadModule: "mouse"
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "TouchPad" (type: MOUSE)
Synaptics DeviceInit called
SynapticsCtrl called.
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc/pc(pc105)+pc/us" };
xkb_geometry { include "pc(pc105)" };
Synaptics DeviceOn called
(--) TouchPad auto-dev sets device to /dev/input/event2
(**) Option "Device" "/dev/input/event2"
(--) TouchPad touchpad found
SynapticsCtrl called.
SynapticsCtrl called.
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetGrabKeysState - disabled
SetGrabKeysState - enabled
Synaptics DeviceOff called
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 3, should be 1; fixing.

kernelOfTruth
Watchman

Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

Posted: Tue Mar 13, 2007 9:49 am Post subject:

modify that according to your hardware: http://www.ubuntuusers.de/paste/7943/?format=txt and have a look at: https://forums.gentoo.org/viewtopic-p-3933501.html#3933501 _________________ https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0 https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa Hardcore Gentoo Linux user since 2004

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Tue Mar 13, 2007 7:14 pm Post subject:

Still the same problem. Xorg.0.log errors are the same as with the old Xorg.conf file. Right from the beginning, I can see the things which I think need to be disabled are enabled.

/var/log/Xorg.0.log

Code:

(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled

Further in the log, this Error still appears...

Code:

(EE) AIGLX: Screen 0 is not DRI capable

here is a copy of the new xorg.conf file

Code:

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection

Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
EndSection

Section "Module"
Load "record"
Load "extmod"
Load "dbe"

SubSection "extmod"
   Option "omit xfree86-dga" #dont install DGE extenstions
EndSubSection

Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
Load "synaptics"
Load "GLcore"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver    "mouse"
Option    "Protocol" "MouseMan"
Option    "Device" "/dev/mouse2"
EndSection

Section "InputDevice"
Identifier "spaceball"
Driver    "magellan"
Option    "Device" "/dev/cua0"
EndSection

Section "InputDevice"
Identifier "spaceball2"
Driver    "spaceorb"
Option    "Device" "/dev/cua0"
EndSection

Section "InputDevice"
Identifier "TouchPad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mouse1"
Option "SHMConfig" "on"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "0"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.60"
Option "MaxSpeed" "1.10"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "TouchpadOff" "2"
EndSection

Section "Monitor"
Identifier "Monitor0"
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
EndSection

Section "Monitor"
Identifier "aticonfig Monitor 0"
Option    "DPMS" "true"
EndSection

Section "Device"
Identifier "Standard VGA"
Driver    "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection

Section "Device"
Identifier "ATI mobility x600"
Driver    "fglrx"
EndSection

Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver    "fglrx"
VendorName "ATI"
Option    "RenderAccel" "true"
Option    "AllowGLXWithComposite" "false"
Option    "no_accel" "no"
Option    "no_dri" "no"
Option    "mtrr"    "on"
Option    "DesktopSetup" "single"
Option    "ScreenOverlap" "0"
Option    "Capabilities" "0x00000000"
Option    "CapabilitiesEx" "0x00000000"
Option    "UseFastTLS" "2"
Option    "XAANoOffscreenPixmaps" "true"
Option    "DRI" "true"
Option    "UseInternalAGPGART" "no"
Option    "KernelModuleParm" "agplock=0"
Option    "TripleBuffer" "true"
Option    "VideoOverlay" "on"
Option    "OpenGLOverlay" "off"
Option    "CenterMode" "off"
Option    "PseudoColorVisuals" "off"
Option    "Stereo" "off"
Option    "StereoSyncEnable" "1"
Option    "FSAAEnable" "no"
Option    "FSAAScale" "1"
Option    "FSAADisableGamma" "no"
Option    "FSAACustomizeMSPos" "no"
Option    "FSAAMSPosX0" "0.000000"
Option    "FSAAMSPosY0" "0.000000"
Option    "FSAAMSPosX1" "0.000000"
Option    "FSAAMSPosY1" "0.000000"
Option    "FSAAMSPosX2" "0.000000"
Option    "FSAAMSPosY2" "0.000000"
Option    "FSAAMSPosX3" "0.000000"
Option    "FSAAMSPosY3" "0.000000"
Option    "FSAAMSPosX4" "0.000000"
Option    "FSAAMSPosY4" "0.000000"
Option    "FSAAMSPosX5" "0.000000"
Option    "FSAAMSPosY5" "0.000000"
Option    "BlockSignalsOnLock" "on"
Option    "ForceGenericCPU" "no"
Option    "PowerState" "1"
BusID    "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen1"
Device "ATI mobility x600"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
SubSection "Display"
   Viewport 0 0
   Depth 24
   Modes "1680x1050_60.00" "1400x900"
EndSubSection
SubSection "Display"
   Viewport 0 0
   Depth 16
   Modes "1680x1050_60.00" "1400x900" "800x600"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig Monitor 0"
Device    "ATI Graphics Adapter 0"
Monitor    "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
   Viewport 0 0
   Depth    16
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "Screen1" 0 0
InputDevice "TouchPad" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option    "BlankTime" "3"
Option    "StandbyTime" "5"
Option    "OffTime" "20"
Option    "AIGLX"    "off"
EndSection

kernelOfTruth
Watchman

Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

Posted: Tue Mar 13, 2007 10:00 pm Post subject:

1) jimmathy, remove xorg.conf from the root of your /home directory, if applicable 2) compile xorg-server with the following use-flags: dri ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -xprint VIDEO_CARDS="fglrx" 3) remove support for aiglx, exa, xaa if applicable (use-flags): -aiglx -exa -xaa 4) eselect set ati && env-update && source /etc/profile 5) check your kernel-config (no radeonfb, intel-agp as module ...) 6) report back _________________ https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0 https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa Hardcore Gentoo Linux user since 2004

Frelon
Tux's lil' helper

Joined: 10 Oct 2004
Posts: 149
Location: France

Posted: Tue Mar 13, 2007 11:45 pm Post subject:

I have almost the same config than you and everything works great. Take a look at that : http://stan.openmod.org/doku.php/linux:gentoo_install_sony And that, for Beryl/Xgl : http://stan.openmod.org/doku.php/linux:xgl_compiz Sometimes, ~/.beryl-managerrc need to be removed before launching. _________________ http://stan.openmod.org

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Wed Mar 14, 2007 7:15 am Post subject:

When I run...

Code:

eselect set ati

I get...

Code:

!!!Error: Can't load module set
Killed

and I went through my Kernel and I had everything built into the kernel. So I tried to load them as Modules instead...

Code:

Device Drivers --->
Character devices --->
<M> /dev/agpgart (AGP Support)
<M> ATI chipset support
<M>Intel 440LX/BX/GX, I8xx and E7x05 chipset support

then I added intel-agp to /etc/modules.autoload.d/kernel-2.6
which loads just fine at start-up

AIGLX seems to still be coming up,

Code:

(==) AIGLX enabled
...
(EE)AIGLX: Screen 0 is not DRI capable

fglrx ran a new Error also...

Code:

(WW) fglrx(0): Failed to open DRM connection for driver fglrx
(EE) fglrx(0): Failed to initialize GPS!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Wed Mar 14, 2007 7:59 am Post subject:

I ran through the Beryl/Xgl How To (http://stan.openmod.org/doku.php/linux:xgl_compiz ) and it is still giving me the same error in the Xorg.0.log file which I posted above.

kernelOfTruth
Watchman

Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

Posted: Wed Mar 14, 2007 9:33 am Post subject:

oops, sorry, that was a typo / forgot parts:

Code:

eselect opengl list

shows you all opengl implementations

switch to ati with

Code:

eselect opengl set ati

then

Code:

env-update && source /etc/profile

_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa

Hardcore Gentoo Linux user since 2004

Frelon
Tux's lil' helper

Joined: 10 Oct 2004
Posts: 149
Location: France

Posted: Wed Mar 14, 2007 9:43 am Post subject:

Quote:

When I run...
Code:

eselect set ati

I get...
Code:

!!!Error: Can't load module set
Killed

I Think It is :

Code:

eselect opengl set ati

or something like that.

Check the your kernel configuration :
1. No DRM
2. Intel chipset (AGPart), hard compiled (I don't think it is an ATI chipset, use lspci

re-emerge ati-drivers, modprobe fglrx and add fglrx in the autoload file.

You can found all my files (.config, xorg.conf, make.conf) here : http://stan.openmod.org/doku.php/linux:gentoo_install_sony

Quote:

Option "AIGLX" "off"

I think it is "False" or "false" rather than "off".
_________________
http://stan.openmod.org

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Wed Mar 14, 2007 11:12 pm Post subject:

Still the same errors.
I changed the AIGLX from "off" to "false" and it still runs AIGLX. My errors remain...

Code:

(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
...
(WW) fglrx(0): Failed to open DRM connection for driver fglrx
(EE) fglrx(0): Failed to initialize GPS!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
...
(EE)AIGLX: Screen 0 is not DRI capable

I thought it was "eselect opengl set ati" and I ran it, but no change.

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Thu Mar 15, 2007 11:32 pm Post subject:

Thanks to the help of the fine people in the #gentoo IRC, I have successfully disabled AIGLX and Composite. However, these two erros still remane...

Code:

Does anyone have any ideas on how to correct these errors?

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Fri Mar 16, 2007 5:52 pm Post subject:

Nvm. Gonna try to use Open Source ATI drivers on my card. They are in testing but they seem to work fine. I can boot into X just fine. However I have this error...

Code:

(WW) AIGLX: 3D driver claims to not support visual 0x23
...
(WW) AIGLX: 3D driver claims to not support visual 0x32

Thanks again for the help!

Mgiese
Veteran
Veteran

Joined: 23 Mar 2005
Posts: 1609
Location: indiana

Posted: Fri Mar 16, 2007 6:45 pm Post subject:

does anyone know howto enable "composite" ? i know i have to enable it in xorg.conf in order to get beryl-manager work, but wasnt there a keyword for xorg-server ? or any different package ? thx a lot _________________ I do not have a Superman complex, for I am God not Superman Ryzen9 7950x ; Geforce1650 ; kernel 6.5 ; XFCE

CreepingDeath
n00b
n00b

Joined: 10 Sep 2005
Posts: 12

Posted: Fri Mar 16, 2007 7:34 pm Post subject:

Something like

Quote:

Section "Extensions"
Option "Composite" "enable"
EndSection

in your xorg.conf should do it.

(since I'm using native Nvidia drivers instead of the xgl or aiglx; I also had to add:

Quote:

Option "AddARGBGLXVisuals" "true"
Option "AllowGLXWithComposite" "True"

to my device section.

enzobelmont
Guru
Guru

Joined: 06 Apr 2004
Posts: 345
Location: Chiapas, Mexico

Posted: Fri Mar 16, 2007 7:54 pm Post subject:

CreepingDeath wrote:

Something like

Quote:

Section "Extensions"
Option "Composite" "enable"
EndSection

in your xorg.conf should do it.

(since I'm using native Nvidia drivers instead of the xgl or aiglx; I also had to add:

Quote:

Option "AddARGBGLXVisuals" "true"
Option "AllowGLXWithComposite" "True"

to my device section.

you're confusing him more, if he's an ati user, he shouldn't use composite enabled in his xorg.conf.

sorry my english... :wink:

_________________
Mens sana in corpore sano... Gentoo laetificat cor hominis

jimmathy
n00b
n00b

Joined: 09 Feb 2007
Posts: 23
Location: USA

Posted: Tue Mar 20, 2007 9:35 pm Post subject:

Yeah, I am just going to say screw it for now, X is working well enough in 2d, and I will just have to enjoy AIGLX on my Desktop which has a much easier to use Nvidia card. Thank you for your help though, I really do appreciate it.

RedHand
n00b
n00b

Joined: 10 Apr 2005
Posts: 48
Location: Police, Poland

Posted: Thu Mar 22, 2007 5:51 am Post subject:

AIGLX is not working with fglrx driver.

Mgiese
Veteran
Veteran

Joined: 23 Mar 2005
Posts: 1609
Location: indiana

Posted: Tue Mar 27, 2007 8:59 pm Post subject:

RedHand wrote:

AIGLX is not working with fglrx driver.

i use savage-driver, is it possible to use beryl with that card ?
_________________
I do not have a Superman complex, for I am God not Superman

Ryzen9 7950x ; Geforce1650 ; kernel 6.5 ; XFCE

Elv13
Guru
Guru

Joined: 13 Nov 2005
Posts: 388
Location: Socialist land of North America

Posted: Tue Mar 27, 2007 11:08 pm Post subject:

jimmathy wrote:

Thanks to the help of the fine people in the #gentoo IRC, I have successfully disabled AIGLX and Composite. However, these two erros still remane...

Code:

Does anyone have any ideas on how to correct these errors?

How did you do it, i have actually a simmilay problem and i can not use XGL (it is too slow).
And for your problem, just remove drm, radeon and dri from your kernel (it will not work if one of them is enable). Then go to the amd website and install the driver from the official .run, i had the same problem and its how i solved it.

Display posts from previous:

	Gentoo Forums Forum Index Unsupported Software	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy