| View previous topic :: View next topic |
| Author |
Message |
wbrokow1
Guru
Joined: 03 Jan 2005
Posts: 372
|
 Posted: Wed Feb 06, 2008 12:07 am Post subject: DVD mounting problem |
 |
|
I get an error when trying to mount DVD's on either of my DVD units(plextor & NEC burner)
Audio CD's mount and play on them but burnt dvd's give an error.
Stamped production DVD's play in xine also. Why aren't my burnt data DVD's mountable?
My fstab:
| Code: |
# This file is edited by fstab-sync - see 'man fstab-sync' for details
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 defaults,noatime 1 2
/dev/hda3 / ext3 noatime 0 1
/dev/hda2 none swap sw 0 0
/dev/hdb1 /backup ext2 defaults,noatime 0 0
/dev/cdroms/cdrom0 /mnt/cdrom auto noauto,user 0 0
/dev/cdroms/cdrom1 /mnt/cdrom1 auto noauto,user 0 0
/dev/sdc2 /mnt/ipod vfat sync,nodev,noauto,user,uid=1000,gid=100 0 0
/dev/sdc1 /mnt/memstick vfat sync,nodev,noauto,user 0 0
#dev/fd0 /mnt/floppy auto noauto,user 0 0
#logical volumes
/dev/vg/usr /usr ext3 noatime 0 0
/dev/vg/home /home ext3 noatime 0 0
/dev/vg/var /var ext3 noatime 0 0
/dev/vg/opt /opt ext3 noatime 0 0
/dev/vg/tmp /tmp ext3 noatime 0 0
/dev/vg/video /video xfs noatime 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
|
The error is:
Error - kio_media_mounthelper
mount: block device /dev/hdd is write protected, mounting read only
mount: wrong fs type, bad option, bad superblock on dev/hdd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmes |tail or so
I am able to burn DVD's through k3b though.
I can't mount or get listings from data dvd's. or dvd movies.
Thanks for any help! |
|
| Back to top |
|
 |
frostschutz
Advocate
Joined: 22 Feb 2005
Posts: 2977
Location: Germany
|
| Posted: Wed Feb 06, 2008 1:40 am Post subject: |
|
|
| what does dmesg | tail say after trying to mount the device? check the contents of your /proc/filesystems. you need iso9660 and (for dvds maybe) udf support in order to be able to mount them. |
|
| Back to top |
|
|
wbrokow1
Guru
Joined: 03 Jan 2005
Posts: 372
|
| Posted: Wed Feb 06, 2008 1:57 am Post subject: |
|
|
| Code: |
wbrokow1 mythtv # dmesg |tail
eth0: link down.
eth0: link up.
udf: bad mount option "managed" or missing value
udf: bad mount option "managed" or missing value
udf: bad mount option "managed" or missing value
udf: bad mount option "managed" or missing value
udf: bad mount option "managed" or missing value
udf: bad mount option "managed" or missing value
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0000850001123e52]
|
| Code: |
nodev sysfs
nodev rootfs
nodev bdev
nodev proc
nodev cpuset
nodev binfmt_misc
nodev debugfs
nodev sockfs
nodev pipefs
nodev anon_inodefs
nodev futexfs
nodev tmpfs
nodev inotifyfs
nodev configfs
nodev devpts
reiserfs
ext3
ext2
nodev ramfs
msdos
vfat
iso9660
nodev nfs
nodev nfsd
nodev smbfs
nodev cifs
ntfs
nodev autofs
nodev fuse
fuseblk
nodev fusectl
|
|
|
| Back to top |
|
|
wbrokow1
Guru
Joined: 03 Jan 2005
Posts: 372
|
| Posted: Thu Feb 07, 2008 11:49 pm Post subject: |
|
|
Can anyone help?
Thanks |
|
| Back to top |
|
|
coolsnowmen
Veteran
Joined: 30 Jun 2004
Posts: 1479
Location: No.VA
|
| Posted: Fri Feb 08, 2008 3:20 am Post subject: Re: DVD mounting problem |
|
|
| wbrokow1 wrote: |
Error - kio_media_mounthelper
mount: block device /dev/hdd is write protected, mounting read only
mount: wrong fs type, bad option, bad superblock on dev/hdd,
missing codepage or other error
|
I am trying to understand you problem. You say you have an error mounting your dvd.
But you post an error from kio_media_mounthelper
What happens when YOU mount it
also, what is your actual cdrom/dvd device?
the error is hdd, but your fstab is /dev/cdrom....
_________________
emerge: there are no ebuilds to satisfy "moo" |
|
| Back to top |
|
|
nutbar21
Apprentice
Joined: 05 Dec 2004
Posts: 205
Location: USA
|
| Posted: Fri Feb 08, 2008 3:30 am Post subject: |
|
|
Have you tried your DVDs in another computer to see if they burned properly?
_________________
"Your voice is like the sound of sirens to a house on fire..." -The Alkaline Trio |
|
| Back to top |
|
|
wbrokow1
Guru
Joined: 03 Jan 2005
Posts: 372
|
| Posted: Fri Feb 08, 2008 1:13 pm Post subject: |
|
|
Yes the DVD's burn properly, I've used them in other computers and DVD units.
I'll try mounting again manually.
THanks |
|
| Back to top |
|
|
Jagaer
n00b
Joined: 27 Feb 2004
Posts: 16
Location: Kingston, On, Canada
|
| Posted: Wed Mar 12, 2008 1:07 am Post subject: |
|
|
I had the same issue.
Note that /dev/cdroms/cdrom0 is no longer a valid device (doesn't exist) you need to edit your fstab so /dev/cdroms/cdrom0 is /dev/cdrom and /dev/cdroms/cdrom1 is /dev/cdrom1
This should fix your issue...at least it fixed mine. |
|
| Back to top |
|
|
pappy_mcfae
Watchman
Joined: 27 Dec 2007
Posts: 5999
Location: Pomona, California.
|
| Posted: Wed Mar 12, 2008 6:23 am Post subject: |
|
|
If you are using dbus/hal, you should have nothing in your fstab that points to a CDROM device. For example, this is my fstab for this machine: | Code: | # Salvaged from it's Slackware days
# Originally written by Slackware setup, edited by Pappy, and
# modified for use with Gentoo
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/sda6 swap swap w 0 0
/dev/sda7 / reiserfs defaults 1 1
/dev/sda1 /mnt/fat16 vfat defaults 1 0
/dev/sda5 /mnt/winXP ntfs-3g ro 1 0
# /dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
# /dev/fd0 /mnt/floppy auto noauto,owner 0 0
|
Note that the floppy drive (a vestage from Slackware), and the CDROM drive are commented out completely. Whenever I put my burnt CD's or DVD's into the drive, they work. Data disks or copied movies, the drive makes no distinction.
Another possibility is hardware problems. Some drives will read anything you can stick in the drawer. Others turn up their noses at anything that wasn't mass produced. Some used to work just fine, but get a little older and fussier. That's just the way of the world...and if it is the case, the only fix is replacing the drives.
Hope that helps.
Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols. |
|
| Back to top |
|
|
|
Kernel & Hardware
