| View previous topic :: View next topic |
| Author |
Message |
IsraelBuitronD
Guru
Joined: 24 Jun 2005
Posts: 344
Location: México
|
 Posted: Tue Dec 19, 2006 5:57 pm Post subject: M1210 modem does not work |
 |
|
Hi
I have a Dell XPS M1210, with Gentoo but my modem does not work, and i don know why.
Some people say me to emerge hsfmodem but does not work yet.
here you have mi lspci:
| Code: | # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
03:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
#
|
i Have emerged hsfmodem, and it say that run hsfconfig after emerge, and output this:
| Code: | # hsfconfig
Conexant HSF softmodem driver, version 7.47.00.03full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
Warning: existing driver modules found under:
/lib/modules/2.6.18-gentoo-r4/
Would you like to keep using them? [no]
No pre-built modules for: unknown-unknown linux-2.6.18-gentoo-r4 i686-SMP
Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.18-gentoo-r4/build]
Building modules for kernel 2.6.18-gentoo-r4, using source directory
/lib/modules/2.6.18-gentoo-r4/build. Please wait...
done.
* Updating /etc/modules.conf ... [ ok ]
* Updating modules.dep ... [ ok ]
Warning: no device detected by hsf driver - HDA modems may require reboot
Note: HDA support not compiled in the driver
Note: kernel module slamr overridden by hsfmc97ich hsfmc97sis hsfmc97via hsfmc97ali
#
|
and my /etc/modules.conf:
| Code: | # cat /etc/modules.conf
### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update(8).
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
# Support for i2c and lm_sensors
alias char-major-89 i2c-dev
# Old nvidia support ...
alias char-major-195 NVdriver
alias /dev/nvidiactl char-major-195
### modules-update: end processing /etc/modules.d/aliases
### modules-update: start processing /etc/modules.d/hsf
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias /dev/modem /dev/ttySHSF
alias char-major-240 /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF
alias char-major-241 /dev/ttySHSF
options hsfserial serialmajor=240 calloutmajor=241
alias char-major-244 hsfosspec
alias /dev/hsfdiag hsfosspec
alias /dev/hsfdiag* /dev/hsfdiag
alias char-major-245 /dev/hsfdiag
options hsfosspec dcpmajor=244 diagmajor=245
probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_intel
### modules-update: end processing /etc/modules.d/hsf
### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### modules-update: end processing /etc/modules.d/i386
### modules-update: start processing /etc/modules.d/ipw3945
# modules.d configuration file for IPW3945
# For more information please read:
# README.ipw3945
# Configurable module parameters
# ------------------------------
# antenna: select antenna (1=Main, 2=Aux, default 0 [both])
# disable: manually disable the radio (default 0 [radio on])
# associate: auto associate when scanning (default 0 off)
# auto_create: auto create adhoc network (default 1 on)
# led: enable led control (default 1 on)
# channel: channel to limit associate to (default 0 [ANY])
# rtap_iface: create the rtap interface (1 - create, default 0)
# mode: network mode (0=BSS,1=IBSS,2=Monitor)
### modules-update: end processing /etc/modules.d/ipw3945
### modules-update: start processing /etc/modules.d/ipw3945d
install ipw3945 /sbin/modprobe --ignore-install ipw3945; sleep 0.5; /sbin/ipw3945d --quiet
remove ipw3945 /sbin/ipw3945d --kill; /sbin/modprobe -r --ignore-remove ipw3945
### modules-update: end processing /etc/modules.d/ipw3945d
### modules-update: start processing /etc/modules.d/ppp
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-13 n_hdlc
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-24 pppoe
### modules-update: end processing /etc/modules.d/ppp
### modules-update: start processing /etc/modules.d/slmodem
# slmodem 2.9.x kernel modules' configuration file
alias char-major-242 slamr
alias char-major-243 slusb
### modules-update: end processing /etc/modules.d/slmodem
# |
Please help me! |
|
| Back to top |
|
 |
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Tue Dec 19, 2006 7:35 pm Post subject: |
|
|
i didn't see your modem in lspci output... is it a pci modem?
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
IsraelBuitronD
Guru
Joined: 24 Jun 2005
Posts: 344
Location: México
|
| Posted: Tue Dec 19, 2006 9:26 pm Post subject: |
|
|
| i dont know, but how do i get this info? |
|
| Back to top |
|
|
Kuhndog86
Apprentice
Joined: 20 Jul 2004
Posts: 271
Location: Minnesota
|
| Posted: Wed Apr 04, 2007 3:26 pm Post subject: |
|
|
| The modem is on the high definition audio bus. Hsfconfig shows that the hda modules were not built and that is probably why it is not working. I'm fighting with the same issues at the moment. I'll post back if i get anywhere with it. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
