| View previous topic :: View next topic |
| Author |
Message |
andretti
Tux's lil' helper
Joined: 25 Feb 2007
Posts: 94
|
 Posted: Mon Apr 16, 2007 9:35 am Post subject: DVICO Fusion Dual Digital HDTV Card |
 |
|
I've spent a whole day trying to setup this DVB-T card, but...
It seems that the kernel can recognise this card. It shows both CX23880 and Zarlink ZL10353 DVB-T in dmesg without any error, and I can see /dev/viedo0, /dev/vbi0 in /dev.
I've read something in another post https://forums.gentoo.org/viewtopic-t-286417-start-0.html, and therefore ran MAKEDEV-DVB.sh to generate /dev/dvb. Now when I run w_scan, it appears that it can identify frontend Zarlink ZL10353, but gets filter timeout pid errors at the end.
Can someone point me a direction? Thank you.
PS. I'm using kernel 2.6.19-gentoo-rc5 |
|
| Back to top |
|
 |
andretti
Tux's lil' helper
Joined: 25 Feb 2007
Posts: 94
|
| Posted: Thu Apr 19, 2007 12:44 pm Post subject: |
|
|
I have no clue what's wrong. I can't see anything wrong, but it just doesn't work...
Both /dev/dvb/adapter0 and /dev/dvb/adapter1 did show up, and adapter1 (usb tuner) actually works but adapter 0 won't.
I'm using v4l-dvb drivers and here is my dmesg
| Code: |
Linux video capture interface: v2.00
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
usb 1-2: USB disconnect, address 2
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 18 (level, low) -> IRQ 18
cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 128, mmio: 0xe0000000
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44]
cx88[0]/2: cx2388x based dvb card
DVB: Unable to find symbol mt352_attach()
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
usbcore: registered new interface driver dvb_usb_cxusb
usb 1-2: USB disconnect, address 3
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: Unable to find symbol mt352_attach()
DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input2
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.
|
lsmod
| Code: |
Module Size Used by
dvb_usb_cxusb 24708 0
dvb_usb 19468 1 dvb_usb_cxusb
cx88_dvb 15108 0
cx88_vp3054_i2c 5248 1 cx88_dvb
cx8802 16900 1 cx88_dvb
cx88xx 66084 2 cx88_dvb,cx8802
ir_common 32260 1 cx88xx
tveeprom 17040 1 cx88xx
videodev 26368 1 cx88xx
v4l2_common 18176 2 cx88xx,videodev
v4l1_compat 11652 1 videodev
btcx_risc 4744 2 cx8802,cx88xx
dvb_pll 13956 5 dvb_usb_cxusb,dvb_usb,cx88_dvb
video_buf_dvb 5508 1 cx88_dvb
dvb_core 82224 2 dvb_usb,video_buf_dvb
video_buf 22788 4 cx88_dvb,cx8802,cx88xx,video_buf_dvb
zl10353 6920 2
|
|
|
| Back to top |
|
|
JonW
n00b
Joined: 09 Sep 2004
Posts: 34
Location: Sydney, Australia
|
| Posted: Sat Apr 21, 2007 12:38 am Post subject: |
|
|
I have one of these cards, and it worked straight out of the box. I'm running a gentoo-sources-2.6.20-r6 kernel and the linuxtv mercurial dvb sources. My dmesg (from messages) gives me something like this:-
| Code: | Apr 7 10:30:34 server dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Apr 7 10:30:34 server DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:09.2[A] -> GSI 21 (level, low) -> IRQ 22
Apr 7 10:30:34 server TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
Apr 7 10:30:34 server DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
Apr 7 10:30:34 server input: IR-receiver inside an USB DVB receiver as /class/input/input1
Apr 7 10:30:34 server dvb-usb: schedule remote query interval to 150 msecs.
Apr 7 10:30:34 server dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.
Apr 7 10:30:34 server usbcore: registered new interface driver dvb_usb_cxusb
Apr 7 10:30:34 server usb 1-4: USB disconnect, address 2
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:0c.2[A] -> GSI 20 (level, low) -> IRQ 23
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 22
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 23
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 22
Apr 7 10:30:34 server wcfxo: DAA mode is 'FCC'
Apr 7 10:30:34 server Found a Wildcard FXO: Generic Clone
Apr 7 10:30:34 server ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 22 (level, low) -> IRQ 21
Apr 7 10:30:34 server cx2388x dvb driver version 0.0.6 loaded
Apr 7 10:30:34 server DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
Apr 7 10:30:34 server DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
Apr 7 10:30:34 server dvb-usb: bulk message failed: -22 (1/0)
Apr 7 10:30:34 server dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully deinitialized and disconnected.
|
It looks from your dmesg like you don't have the mt352 module loaded.
| Code: | server log # lsmod
Module Size Used by
w83627hf 21008 0
hwmon_vid 2560 1 w83627hf
hwmon 2692 1 w83627hf
i2c_isa 3968 1 w83627hf
fuse 35092 0
dst 24712 1
dvb_bt8xx 13188 7
cx88_dvb 12548 14
cx88_vp3054_i2c 3712 1 cx88_dvb
bt878 8520 2 dst,dvb_bt8xx
tuner 57768 0
zl10353 5128 2
mt352 5508 1
video_buf_dvb 4484 1 cx88_dvb
dvb_usb_cxusb 17028 7
dvb_usb 18444 1 dvb_usb_cxusb
dvb_core 64168 4 dst,dvb_bt8xx,video_buf_dvb,dvb_usb
dvb_pll 11268 7 dvb_bt8xx,cx88_dvb,dvb_usb_cxusb,dvb_usb
wcfxo 9376 0
zaptel 172452 7 wcfxo
crc_ccitt 2176 1 zaptel
bttv 160372 2 dvb_bt8xx,bt878
firmware_class 7296 3 dvb_bt8xx,dvb_usb,bttv
cx8802 13828 1 cx88_dvb
cx8800 26384 0
cx88xx 57636 3 cx88_dvb,cx8802,cx8800
ir_common 29444 2 bttv,cx88xx
video_buf 18180 6 cx88_dvb,video_buf_dvb,bttv,cx8802,cx8800,cx88xx
tveeprom 13584 2 bttv,cx88xx
videodev 24320 3 bttv,cx8800,cx88xx
v4l1_compat 11780 2 bttv,videodev
compat_ioctl32 1280 2 bttv,cx8800
v4l2_common 14592 5 tuner,bttv,cx8800,cx88xx,videodev
btcx_risc 3848 4 bttv,cx8802,cx8800,cx88xx
skge 31504 0
i2c_i801 6924 0
|
Hope that helps.
Jon |
|
| Back to top |
|
|
andretti
Tux's lil' helper
Joined: 25 Feb 2007
Posts: 94
|
| Posted: Thu Jun 21, 2007 11:46 pm Post subject: |
|
|
Thanks Jon. It has been a while, but still no luck... I had tried loading the mt352 module, however the problem remains.
I am trying kernel-2.6.21.5 with 2007.0 and v4l-dvb at the moment. Now, neither PCI nor USB tuner works. It appears that modules are automatically loaded by udev during boot up before loading other modules such as mt352 and zl10353.
Could someone point me a direction? I'm completely lost.
I used to think installing drivers on Win95 is a pain, but now... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
