| View previous topic :: View next topic |
| Author |
Message |
DancesWithWords
Guru
Joined: 29 Jun 2002
Posts: 347
Location: ottawa, canada
|
 Posted: Mon Apr 16, 2007 7:52 pm Post subject: How to get this webcam installed - Vimicro |
 |
|
I've been reading, gentoo and google and can't find anything for this webcam. Is it not supported yet? Any info could be helpful.
=======================================
PC Camera
Manufacturer: Vimicro Corp.
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0ac8
Product Id: 307b
Revision Number: 1.00
Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 160mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 0
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 1
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 128
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 2
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 192
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 3
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 256
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 4
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 384
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 5
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 512
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 6
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 768
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 0
Name: (none)
Alternate Number: 7
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 896
Interval: 1ms
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms |
|
| Back to top |
|
 |
DancesWithWords
Guru
Joined: 29 Jun 2002
Posts: 347
Location: ottawa, canada
|
| Posted: Mon Apr 16, 2007 8:14 pm Post subject: Re: How to get this webcam installed - Vimicro |
|
|
[quote="DancesWithWords"]I've been reading, gentoo and google and can't find anything for this webcam. Is it not supported yet? Any info could be helpful.
=======================================
PC Camera
Manufacturer: Vimicro Corp.
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0ac8
Product Id: 307b
Revision Number: 1.00
SNIP...
Additional Info:
==============T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0ac8 ProdID=307b Rev= 1.00
S: Manufacturer=Vimicro Corp.
S: Product=PC Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=160mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 192 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 0 Alt= 7 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 896 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms============== |
|
| Back to top |
|
|
|
Kernel & Hardware
