| View previous topic :: View next topic |
| Author |
Message |
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
 Posted: Tue Apr 17, 2007 3:42 pm Post subject: [risolto] wireless bcm43xx |
 |
|
Sto provando a far funzionare la scheda wireless sul mio laptop (ibook G4):
| Code: | [root@helium tmp]# uname -r
2.6.20-gentoo-r5 |
| Code: | [root@helium tmp]# lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] (rev 01)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) |
e dopo aver seguito paro paro questa guida mi trovo con:
| Code: | [root@helium tmp]# dmesg
...
bcm43xx driver
PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
... |
| Code: | [root@helium tmp]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0D:93:6C:0C:A2
inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1963 errors:0 dropped:0 overruns:0 frame:0
TX packets:1920 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:173328 (169.2 Kb) TX bytes:493475 (481.9 Kb)
Interrupt:41 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:672 (672.0 b) TX bytes:672 (672.0 b) |
ovvero non vedo nessun ethX associato alla mia wireless.
Cio' che mi risulta starno e' l'assenza di messaggi relativi al caricamento del firmware:
| Code: | [root@helium tmp]# ll /lib/firmware
total 140K
2158558 drwxr-xr-x 2 root root 4.0K 2007-04-17 02:37 .
2158465 drwxr-xr-x 8 root root 4.0K 2007-04-17 02:32 ..
2158573 -rw-r--r-- 1 root root 3.5K 2007-04-17 02:37 bcm43xx_initval01.fw
2158574 -rw-r--r-- 1 root root 16 2007-04-17 02:37 bcm43xx_initval02.fw
2158575 -rw-r--r-- 1 root root 3.5K 2007-04-17 02:37 bcm43xx_initval03.fw
2158576 -rw-r--r-- 1 root root 16 2007-04-17 02:37 bcm43xx_initval04.fw
2158577 -rw-r--r-- 1 root root 2.5K 2007-04-17 02:37 bcm43xx_initval05.fw
2158578 -rw-r--r-- 1 root root 248 2007-04-17 02:37 bcm43xx_initval06.fw
2158579 -rw-r--r-- 1 root root 2.5K 2007-04-17 02:37 bcm43xx_initval07.fw
2158580 -rw-r--r-- 1 root root 2.5K 2007-04-17 02:37 bcm43xx_initval08.fw
2158582 -rw-r--r-- 1 root root 248 2007-04-17 02:37 bcm43xx_initval09.fw
2158583 -rw-r--r-- 1 root root 248 2007-04-17 02:37 bcm43xx_initval10.fw
2158570 -rw-r--r-- 1 root root 22K 2007-04-17 02:37 bcm43xx_microcode11.fw
2158559 -rw-r--r-- 1 root root 16K 2007-04-17 02:37 bcm43xx_microcode2.fw
2158568 -rw-r--r-- 1 root root 20K 2007-04-17 02:37 bcm43xx_microcode4.fw
2158569 -rw-r--r-- 1 root root 22K 2007-04-17 02:37 bcm43xx_microcode5.fw
2158571 -rw-r--r-- 1 root root 1.3K 2007-04-17 02:37 bcm43xx_pcm4.fw
2158572 -rw-r--r-- 1 root root 1.3K 2007-04-17 02:37 bcm43xx_pcm5.fw |
...ragazzi sto impazzendoci sopra!
_________________
HOWTO 1: Spegnere il laptop!
HOWTO 2: Comprimere i DVDs!
Last edited by quantumwire on Tue Apr 17, 2007 9:21 pm; edited 1 time in total |
|
| Back to top |
|
 |
mambro
l33t
Joined: 22 Mar 2004
Posts: 752
Location: Mira (VE) - Italy
|
| Posted: Tue Apr 17, 2007 5:43 pm Post subject: |
|
|
Ma con
La vede?
_________________
"The design of a worldwide, fully transparent distributed file system for simultaneous use by millions of mobile and frequently disconnected users is left as an excercise for the reader".
Andrew S. Tanenbaum, Distributed Operating Systems. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Tue Apr 17, 2007 6:24 pm Post subject: |
|
|
| mambro wrote: | Ma con
La vede? |
Credo di si:
| Code: | [root@helium init.d]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0D:93:6C:0C:A2
inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:441 errors:0 dropped:0 overruns:0 frame:0
TX packets:434 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:44481 (43.4 Kb) TX bytes:104501 (102.0 Kb)
Interrupt:41 Base address:0x4000
eth1 Link encap:UNSPEC HWaddr 00-0D-93-FF-FE-6C-0C-A2-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth2 Link encap:Ethernet HWaddr 00:0D:93:EC:32:40
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:52 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0 [root@helium ~]# cat /etc/udev/rules.d/70-persistent-net.rules |
Infatti dovrebbe essere le eth2... ce lo dice udev:
| Code: | [root@helium ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, probably run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# PCI device 0x106b:0x0032 (gem)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0d:93:6c:0c:a2", NAME="eth0"
# Firewire device 000d93fffe6c0ca2)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0d:93:ff:fe:6c:0c:a2", NAME="eth1"
# PCI device 0x14e4:0x4320 (bcm43xx)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0d:93:ec:32:40", NAME="eth2" |
A parte che poi in queste ore di delirio ho scoperto di non aver applicato la use "madwifi" nel compilare wpa_supplicant.
Ora pero' sono bloccato ai file di configurazione per la connessione:
| Code: | [root@helium ~]# cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).
modules=( "wpa_supplicant" )
wpa_supplicant_eth2="-Dmadwifi"
dns_domain_lo="quantum.net"
config_eth0=( "dhcp" )
dhcpcd_eth0="-t 10"
config_eth2=( "dhcp" ) |
| Code: | [root@helium ~]# cat /etc/wpa_supplicant/wpa_supplicant.conf
# WPA-PSK/TKIP
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
network={
ssid="epfl"
mode=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=NONE
group=TKIP
psk="********"
priority=1
}
network={
key_mgmt=NONE
priority=-9999999
} |
in quanto ottengo questo messaggio d'errore:
| Code: | [root@helium init.d]# /etc/init.d/net.eth2 start
* Caching service dependencies ... [ ok ]
* Starting eth2
* Starting wpa_supplicant on eth2 ...
ioctl[IEEE80211_IOCTL_SETPARAM]: Invalid argument |
So poco/nulla di protocolli, autenticazioni etc... le uniche cose che conosco sono:
- devo connettermi ad una WPA2 ENTRPRISE
- conosco il mio userid
- conosco la mia password
Sai come aiutarmi???
Grazie!
_________________
HOWTO 1: Spegnere il laptop!
HOWTO 2: Comprimere i DVDs! |
|
| Back to top |
|
|
mambro
l33t
Joined: 22 Mar 2004
Posts: 752
Location: Mira (VE) - Italy
|
| Posted: Tue Apr 17, 2007 6:58 pm Post subject: |
|
|
madwifi non serve.
Ti posto i miei files di configurazione (ho anch'io un ibook)
/etc/conf.d/net
| Code: |
config_eth1=( "192.168.1.4" )
routes_eth1=( "default via 192.168.1.1" )
modules=( "wpa_supplicant" )
wpa_supplicant_eth1="-Dwext"
|
/etc/wpa_supplicant/wpa_supplicant.conf
| Code: |
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="xxxxxxxxxx"
scan_ssid=1
key_mgmt=WPA-PSK
proto=WPA
pairwise=CCMP TKIP
group=CCMP TKIP
psk=xxxxxxxxxxxxxxxxxx
priority=5
}
|
a me gli script di avvio per la wireless nn funzionano quindi uso questo script
| Code: |
/etc/init.d/net.eth1 stop
/etc/init.d/net.eth0 stop
ifconfig eth1 down
ifconfig eth0 down
killall wpa_supplicant
killall wpa_cli
modprobe -r bcm43xx
modprobe bcm43xx
ifconfig eth1 192.168.1.4 up
wpa_supplicant -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf -B -ieth1 &
route add default gw 192.168.1.1
ntpdate -b -u pool.ntp.org
|
Se hai ancora problemi chiedi pure 
Ciao
_________________
"The design of a worldwide, fully transparent distributed file system for simultaneous use by millions of mobile and frequently disconnected users is left as an excercise for the reader".
Andrew S. Tanenbaum, Distributed Operating Systems. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Tue Apr 17, 2007 7:14 pm Post subject: |
|
|
| mambro wrote: | madwifi non serve.
...
Se hai ancora problemi chiedi pure
Ciao |
Perche' non serve madwifi?
Ora provo la tua ricetta... ma dov'e' che mi viene richiesto lo username?
_________________
HOWTO 1: Spegnere il laptop!
HOWTO 2: Comprimere i DVDs! |
|
| Back to top |
|
|
mambro
l33t
Joined: 22 Mar 2004
Posts: 752
Location: Mira (VE) - Italy
|
| Posted: Tue Apr 17, 2007 7:34 pm Post subject: |
|
|
| quantumwire wrote: |
Perche' non serve madwifi?
|
http://madwifi.org/wiki/Compatibility
qui non mi pare ci sia la scheda dell'ibook quindi non capisco cosa c'entri madwifi
| quantumwire wrote: |
Ora provo la tua ricetta... ma dov'e' che mi viene richiesto lo username? |
Ma che tipo di autenticazione hai? io sul mio router uso WPA-PSK e mi chiede solo la password.
_________________
"The design of a worldwide, fully transparent distributed file system for simultaneous use by millions of mobile and frequently disconnected users is left as an excercise for the reader".
Andrew S. Tanenbaum, Distributed Operating Systems. |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Tue Apr 17, 2007 7:43 pm Post subject: |
|
|
| mambro wrote: | | Ma che tipo di autenticazione hai? io sul mio router uso WPA-PSK e mi chiede solo la password. |
... hehe... te l'ho detto prima: una WPA2 ENTRPRISE (lo vedo da osx) e mi chiede username e pass quando uso osx!
Qui all'istituto dove lavoro credo poi che l'IP come pure i nameserver etc mi venga tutto fornito via "etere"!!!
Devo anche installare iwconfig???
Grazie!
_________________
HOWTO 1: Spegnere il laptop!
HOWTO 2: Comprimere i DVDs! |
|
| Back to top |
|
|
mambro
l33t
Joined: 22 Mar 2004
Posts: 752
Location: Mira (VE) - Italy
|
| Posted: Tue Apr 17, 2007 8:02 pm Post subject: |
|
|
| quantumwire wrote: |
... hehe... te l'ho detto prima: una WPA2 ENTRPRISE (lo vedo da osx) e mi chiede username e pass quando uso osx!
|
Non conosco, passo.
| quantumwire wrote: |
Qui all'istituto dove lavoro credo poi che l'IP come pure i nameserver etc mi venga tutto fornito via "etere"!!!
Devo anche installare iwconfig???
Grazie! |
Bè per l'ip basta usare dhcp, iwconfig non dovrebbe servire se usi wpa_supplicant
_________________
"The design of a worldwide, fully transparent distributed file system for simultaneous use by millions of mobile and frequently disconnected users is left as an excercise for the reader".
Andrew S. Tanenbaum, Distributed Operating Systems. |
|
| Back to top |
|
|
|
Forum italiano (Italian)
