Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Ati Radeon Clone
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
body_and_soul
n00b
n00b


Joined: 05 Apr 2004
Posts: 69
Location: Germersheim

PostPosted: Fri Apr 20, 2007 8:33 pm    Post subject: Ati Radeon Clone Reply with quote

Hallo,
eigendlich wollte ich nur schnell einen externen Monitor an mein Notebook anschließen. Der Monitor des Notebooks soll einfach geklont werden.
Nachdem ich jetzt seit 2 Tagen so ziehmlich alles getestet habe was google auswirft sehe ich den Wald vor lauter Bäumen nicht mehr.
Zur Hardware: Ich habe ein Mobilty Radeon 9200 und verwende den OpenSource Treiber.
Wie weit bin ich:
Das ganze sieht so aus das der Rechner auf beiden Monitoren beim Starten was ausgibt, bis xdm gestartet wird.
Wenn der externe Monitor dranhängt startet der dann in der richtigen Auflösung von 1024x768. Und wenn kein Monitor dranhängt startet das Notebook ganz normal mit 1200x800. Das beide gleichzeit laufen geht einfach nicht.
Hier meine xorg.conf:
Code:
Section "dri"
 Mode 0666
EndSection
Section "Module"
 Load        "dbe"   # Double buffer extension
 SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection
Section "Files
 FontPath    "/usr/share/fonts/local"
 FontPath    "/usr/share/fonts/misc"
 FontPath    "/usr/share/fonts/75dpi:unscaled"
 FontPath    "/usr/share/fonts/100dpi:unscaled"
 FontPath    "/usr/share/fonts/Type1"
 FontPath    "/usr/local/share/fonts"
EndSection
Section "InputDevice"

   Identifier  "Keyboard1"
    Driver      "kbd"

Option "AutoRepeat" "500 30"

Option "XkbModel"   "pc105"
Option "XkbLayout"  "de"

EndSection
Section "InputDevice"

# Identifier and driver

  Identifier  "Mouse1"
   Driver "mouse"
   Option "Protocol"   "ImPS/2"
   Option "ZAxisMapping"   "4 5"
   Option "Device"     "/dev/input/mice"

EndSection


Section "InputDevice"
Identifier      "Touchpad"
Driver          "synaptics"
Option          "Device"        "/dev/input/mouse0"
Option          "ZAxisMapping"  "4 5"
Option          "XAxisMapping"  "6 7"
Option          "Edges"         "1900 5400 1800 3900"
Option          "Finger"        "25 30"
Option          "MaxTapTime"    "150"
Option          "MaxTapMove"    "220"
Option          "VertScrollDelta"       "100"
Option          "MinSpeed"      "0.05"
Option          "MaxSpeed"      "0.15"
Option          "AccelFactor"   "0.0005"
Option          "SHMConfig"     "on"
Option          "UpDownScrolling"       "on"
Option          "Protocol"      "auto-dev"
Option          "CorePointer"   ""
Option          "Buttons"       "7"

EndSection


Section "Monitor"
   Identifier  "Monitor0"
   HorizSync   48
   VertRefresh 60
   Option "DPMS"

EndSection


Section "Device"
  Identifier  "Standard VGA"
  VendorName  "Unknown"
   BoardName   "Unknown"
 Driver      "vga"
 EndSection

Section "Device"
        Identifier "ATI Radeon"
        Driver "radeon"
        # this may solve some issues
        Option      "BusType" "PCI"

        # acceleration
        Option          "AGPMode" "4"
        Option          "AGPFastWrite" "yes"
        Option          "EnablePageFlip" "on"
        Option          "RenderAccel" "on"
        Option          "AccelMethod"   "EXA" # or XXA
#       Option          "BackingStore" "true"
#       Option          "ExaNoOffscreenPixmaps"

        # enable (partial) PowerPlay features
        Option          "DynamicClocks" "on"

        # use bios hot keys on thinkpad (aka fn+f7)
       # Option          "BIOSHotkeys" "on"

        # enable radeon specific xinerama
        Option          "MergedFB" "true"
        Option          "CRT2Position" "clone"
        Option          "CRT2Hsync" "48"
        Option          "CRT2VRefresh" "60"
        Option          "MetaModes" "1280x800"
        Option          "MergedNonRectangular" "true"

        # Color Tiling
        Option          "ColorTiling"   "on"
        # Video overlay
        Option          "OverlayOnCRTC2"        "on"

EndSection


Section "Screen"
    Identifier  "Screen0"
     Device      "ATI Radeon"
     Monitor     "Monitor0"
     DefaultDepth 24
    Option     "Monitor2Position" "Clone"
# Angaben des zweiten Bildschirms
       Option     "Monitor2HSync"    "60"
       Option     "Monitor2VRefresh" "75"
#Option "backingstore"
Subsection "Display"
    Depth       24
    Modes       "1280x800" "800x600" "640x480"
    ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
EndSubsection
EndSection
Section "ServerLayout"

 Identifier  "Server Layout"
 Screen "Screen0"
            InputDevice "Touchpad" "CorePointer"
            InputDevice "Mouse1" "SendCoreEvents"
            InputDevice "Keyboard1" "CoreKeyboard"
             Option "Xinerama" "off"
            Option "Clone" "on"
EndSection



wäre schön wenn mir jemand auf die Spünge helfen könnte

Gruß B&S
Back to top
View user's profile Send private message
schmutzfinger
Veteran
Veteran


Joined: 26 Oct 2003
Posts: 1287
Location: Dresden/Germany

PostPosted: Fri Apr 20, 2007 9:01 pm    Post subject: Reply with quote

Du brauchst 2 Monitor, 2 Screen und 2 Device Sections und musst im Serverlayout beide Screens drinne haben. Das mit den 2 Tagen kann ich fast nicht glauben ...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum