View previous topic :: View next topic |
Author |
Message |
kajsik n00b
Joined: 13 Feb 2004 Posts: 16
|
Posted: Thu Apr 26, 2007 6:32 pm Post subject: Prolink PlayTV P7000 Jak to uruchomić! |
|
|
Witam!
Mam od dłuższego czasu kartę Prolink PlayTV P7000 i dotąd jej nie uruchomiłem!
Aktualnie nie działa tuner i enkoder mpg2
Inaczej mówiąc, POMOCY
Opis karty: http://www.bttv-gallery.de/.
Konfiguracja kernela:http://linuxtv.org/v4lwiki/index.php/Cx88_devices_%28cx2388x%29.
Kernel: 2.6.20-gentoo-r6
W trakcie ładowania modułów jądra nie jest właściwie rozpoznawana karta (messages):
Code: |
Apr 26 15:14:56 serek Linux video capture interface: v2.00
Apr 26 15:14:56 serek cx2388x v4l2 driver version 0.0.6 loaded
Apr 26 15:14:56 serek ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 26 15:14:56 serek cx88[0]: Your board has no valid PCI Subsystem ID and thus can't
Apr 26 15:14:56 serek cx88[0]: be autodetected. Please pass card=<n> insmod option to
Apr 26 15:14:56 serek cx88[0]: workaround that. Redirect complaints to the vendor of
Apr 26 15:14:56 serek cx88[0]: the TV card. Best regards,
Apr 26 15:14:56 serek cx88[0]: -- tux
Apr 26 15:14:56 serek cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
Apr 26 15:14:56 serek cx88[0]: card=0 -> UNKNOWN/GENERIC
Apr 26 15:14:56 serek cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
...
...
Apr 26 15:14:56 serek cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
Apr 26 15:14:56 serek CORE cx88[0]: subsystem: 0000:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
Apr 26 15:14:56 serek TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
Apr 26 15:14:56 serek i2c-algo-bit.o: (0) scl=1, sda=1
Apr 26 15:14:56 serek i2c-algo-bit.o: (1) scl=1, sda=0
Apr 26 15:14:56 serek i2c-algo-bit.o: (2) scl=1, sda=1
Apr 26 15:14:56 serek i2c-algo-bit.o: (3) scl=0, sda=1
Apr 26 15:14:56 serek i2c-algo-bit.o: (4) scl=1, sda=1
Apr 26 15:14:56 serek i2c-algo-bit.o: cx88[0] passed test.
Apr 26 15:14:56 serek tveeprom 1-0050: Huh, no eeprom present (err=-121)?
Apr 26 15:14:56 serek cx88[0]/0: found at 0000:03:00.0, rev: 5, irq: 16, latency: 20, mmio: 0xfb000000
Apr 26 15:14:56 serek tuner 1-0043: chip found @ 0x86 (cx88[0])
Apr 26 15:14:56 serek tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
Apr 26 15:14:56 serek tuner 1-0060: All bytes are equal. It is not a TEA5767
Apr 26 15:14:56 serek tuner 1-0060: chip found @ 0xc0 (cx88[0])
Apr 26 15:14:56 serek cx88[0]/0: registered device video0 [v4l2]
Apr 26 15:14:56 serek cx88[0]/0: registered device vbi0
Apr 26 15:14:56 serek tuner 1-0060: tuner type not set
|
Wynik lsmod:
Code: |
Module Size Used by
w83627ehf 19084 0
hwmon 3588 1 w83627ehf
eeprom 7568 0
i2c_isa 5568 1 w83627ehf
snd_pcm_oss 41600 0
snd_mixer_oss 17024 1 snd_pcm_oss
snd_seq_dummy 3972 0
snd_seq_oss 32832 0
snd_seq_midi_event 7680 1 snd_seq_oss
snd_seq 52720 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8396 3 snd_seq_dummy,snd_seq_oss,snd_seq
cx88_alsa 13832 0
video1394 19228 0
sbp2 23300 0
raw1394 29372 0
dv1394 20252 0
tsdev 8000 0
usbhid 39200 0
nvidia 6835956 16
agpgart 33036 1 nvidia
eth1394 19780 0
ehci_hcd 33676 0
uhci_hcd 24908 0
usbcore 134408 4 usbhid,ehci_hcd,uhci_hcd
tuner 59496 0
cx8800 35404 0
cx88xx 67492 2 cx88_alsa,cx8800
ir_common 30532 1 cx88xx
i2c_algo_bit 8008 1 cx88xx
video_buf 25412 3 cx88_alsa,cx8800,cx88xx
tveeprom 15184 1 cx88xx
compat_ioctl32 1536 1 cx8800
btcx_risc 5192 3 cx88_alsa,cx8800,cx88xx
videodev 27776 2 cx8800,cx88xx
v4l2_common 24448 3 tuner,cx8800,videodev
v4l1_compat 14596 2 cx8800,videodev
snd_hda_intel 21272 5
snd_hda_codec 160704 1 snd_hda_intel
snd_pcm 73860 6 snd_pcm_oss,cx88_alsa,snd_hda_intel,snd_hda_codec
snd_timer 23364 4 snd_seq,snd_pcm
snd 53508 16 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,cx88_alsa,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 8416 1 snd
snd_page_alloc 10184 2 snd_hda_intel,snd_pcm
serio_raw 7236 0
ohci1394 36464 2 video1394,dv1394
ieee1394 301720 6 video1394,sbp2,raw1394,dv1394,eth1394,ohci1394
shpchp 34260 0
pci_hotplug 16072 1 shpchp
iTCO_wdt 10856 0
parport_pc 40484 0
parport 36744 1 parport_pc
|
|
|
Back to top |
|
|
n0rbi666 l33t
Joined: 04 Mar 2005 Posts: 707 Location: \Poland\Krakow
|
Posted: Mon Apr 30, 2007 11:21 am Post subject: |
|
|
Karta nie jest rozpoznawana, bo nie ma swojego eepromu. Trzeba przy modprobe cx8800 dodać card=<n> tuner=<m> (gdzie n i m to liczba odpowiednia dla Twojej karty tv - musisz poszukać, albo sprawdzić wszystko metodą prób i błędów...)
tzn ma wyglądać to
Code: | modprbe cx8800 card=x tuner=y |
Jak już znajdziesz odpowiednienumerki, dodaj wpis w /etc/modules.d
Przykład : /etc/modules.d/kartatv
Code: | options saa7134 card=3 tuner=55 |
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|