michel7
Guru
Joined: 04 May 2006
Posts: 461
Location: localhost
|
 Posted: Wed May 02, 2007 7:16 am Post subject: Asus A8Js Notebook - Hardware Sensoren Problem |
 |
|
Um mich kurz zu fassen, wie bringe ich die Hardware Sensoren (Mainboard Temp, CPU Temp, Graka Temp usw) zum laufen?!
| Code: | hades michel # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0397 (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown device 8168 (rev 01)
06:00.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
06:00.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
06:00.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
06:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
06:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
|
| Code: | hades michel # sensors-detect
# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Sorry, no known PCI bus adapters found.
We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Success!
(confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 0x55 0x56 0x57
Probing for `Maxim MAX6900'... No
Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): y
AMD K8 thermal sensors... No
Intel Core family thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue: y
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 2 at 1:00.0'
Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57)
Chip `EDID EEPROM' (confidence: 8)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `coretemp' (should be inserted):
Detects correctly:
* Chip `Intel Core family thermal sensor' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue: y
If you want to load the modules at startup, generate a config file
below and make sure lm_sensors gets started at boot time; e.g
$ rc-update add lm_sensors default
To make the sensors modules behave correctly, add these lines to
/etc/modules.d/lm_sensors and run modules-update:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.
To load everything that is needed, execute the commands below...
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter 0 at 1:00.0
# modprobe unknown adapter NVIDIA i2c adapter 1 at 1:00.0
# modprobe unknown adapter NVIDIA i2c adapter 2 at 1:00.0
# Chip drivers
modprobe eeprom
# Warning: the required module coretemp is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe coretemp
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----end cut here----
Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file name?
(yes/NO/s):
|
Ahja hier noch meine Kernelconfig: http://phpfi.com/231184
_________________
Software is like sex. It's better when it's free |
|
Deutsches Forum (German)
