View previous topic :: View next topic |
Author |
Message |
bd_italy Apprentice
Joined: 19 Apr 2006 Posts: 184
|
Posted: Mon May 07, 2007 7:36 am Post subject: endlich grafikkarten treiber richtig installieren und nutzen |
|
|
Hallo,
seit einiger Zeit habe ich den verdacht dass die grafiktreiber nicht richtig funktionieren, bzw. ich sie nicht richtig konfiguriert habe.
Dies äusert sich in ruckeln wenn ich ein Fenster verschiebe, beim scrollen in pdfs und OO, screensaver zeigt an dass er mit 30fps läuft, und
googleearth meldet "you are currently running google earth in 'OpenGL' with software emulation." irgendwie finde ich keine gescheite anleitung und treiber zu meiner graka. Und ohne die kann ich es vergessen beryl zu versuchen
hier mal ein paar infos:
meine graka:
Code: | mylaptop max # lspci | grep 915
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
|
meine xorg.conf
Code: |
mylaptop max # cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "TouchPad" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "5"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
Load "dri"
Load "glx"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "Device" "/dev/input/event2"
Option "Protocol" "event"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.60"
Option "MaxSpeed" "1.10"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SEC"
ModelName "3633"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
VideoRam 131072
Option "VBERestore" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
irgendwelche ideen an was es liegen könnte?
grüße bd_italy |
|
Back to top |
|
|
bbgermany Veteran
Joined: 21 Feb 2005 Posts: 1844 Location: Oranienburg/Germany
|
Posted: Mon May 07, 2007 8:03 am Post subject: |
|
|
Moin,
was sagt denn ein "glxinfo | grep render"?
MfG. Stefan _________________ Desktop: Ryzen 5 5600G, 32GB, 2TB, RX7600
Notebook: Dell XPS 13 9370, 16GB, 1TB
Server #1: Ryzen 5 Pro 4650G, 64GB, 16.5TB
Server #2: Ryzen 4800H, 32GB, 22TB |
|
Back to top |
|
|
bd_italy Apprentice
Joined: 19 Apr 2006 Posts: 184
|
Posted: Mon May 07, 2007 11:44 am Post subject: |
|
|
bbgermany wrote: | Moin,
was sagt denn ein "glxinfo | grep render"?
MfG. Stefan |
hi,
ich habe kein glxinfo
Code: | mylaptop max # gl
glav glib-genmarshal glib-mkenums
glib-config glib-gettextize glsa-check
mylaptop max # emerge --search glxinfo
Searching...
[ Results for search key : glxinfo ]
[ Applications found : 0 ]
|
in welchem paket ist das denn drinn?
grüße max |
|
Back to top |
|
|
franzf Advocate
Joined: 29 Mar 2005 Posts: 4565
|
Posted: Mon May 07, 2007 11:59 am Post subject: |
|
|
|
|
Back to top |
|
|
bd_italy Apprentice
Joined: 19 Apr 2006 Posts: 184
|
Posted: Mon May 07, 2007 12:09 pm Post subject: |
|
|
Quote: | mylaptop max # glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
|
|
|
Back to top |
|
|
bd_italy Apprentice
Joined: 19 Apr 2006 Posts: 184
|
Posted: Fri May 11, 2007 9:03 pm Post subject: |
|
|
Hallo,
habe jetzt mich durch einige tutorials durchgelesen und in einigen mailinglists rumgesucht,
bin der lösung aber keinen schritt weiter gekommen.
irgendwelche ideen die mir weiterhelfen könnten?
grüße
bd_italy |
|
Back to top |
|
|
|