Angry_Red_Antz
Tux's lil' helper
Joined: 31 Mar 2005
Posts: 103
Location: Pittsfield, Massachusetts, But 100% Boricua
|
 Posted: Mon May 07, 2007 1:02 pm Post subject: battery full, still shutdown after 5 minutes |
 |
|
I'm running kde on my averatec 3200 laptop
the klaptop indicates that the battery is full, when I
unplugged after 5 minutes the laptop shutdown
if this help this is my dmesg
| Code: |
BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
ACPI: RSDP (v000 AMI ) @ 0x000fa2e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1dff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1dff0030
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: setting ELCR to 0200 (from 0c00)
ACPI: bus type pci registered
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [ECD] (gpe 4) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 9 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7) *0, disabled.
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LIDD]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
|
_________________
Show me the Linux! |
|
Kernel & Hardware
