| View previous topic :: View next topic |
| Author |
Message |
khiz
n00b
Joined: 08 Mar 2007
Posts: 5
|
 Posted: Wed May 16, 2007 8:04 pm Post subject: DMA not working on CD/DVD drives |
 |
|
I've been struggling with this for a few days and I'm not getting anywhere. I can't get DMA working on hda, hdb and hdd; my optical disk drives (my hard drives are SATA). I'm right in thinking that lack of DMA is makign DVDs playback choppily, right? They are a Pioneer DVD-RW DVR-108, a PLEXTOR CD-R PC-W5224A and a Sony DVD-ROM DDU1613. I've tried a good many of setups in .config and I don't really know why it won't work.
Thanks in advance.
| Code: |
$ uname -r
2.6.19-gentoo-r5
|
| Code: |
$ cat /usr/src/linux/.config | grep -v "is not set"
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_GENERICARCH=y
CONFIG_X86_CYCLONE_TIMER=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
CONFIG_HIGHMEM4G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_PHYSICAL_START=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_SYSFS_DEPRECATED=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=2001
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
#
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
#
# DCCP Configuration (EXPERIMENTAL)
#
#
# SCTP Configuration (EXPERIMENTAL)
#
#
# TIPC Configuration (EXPERIMENTAL)
#
#
# QoS and/or fair queueing
#
#
# Network testing
#
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
#
#
# Memory Technology Devices (MTD)
#
#
# Parallel port support
#
#
# Plug and Play support
#
CONFIG_PNP=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
#
# Misc devices
#
#
# ATA/ATAPI/MFM/RLL support
#
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_CONSTANTS=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
CONFIG_AIC79XX_DEBUG_MASK=0
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_ULI=y
CONFIG_PATA_ALI=y
CONFIG_PATA_ATIIXP=y
CONFIG_ATA_GENERIC=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_MAX_SGE=128
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_NET_PCI=y
CONFIG_B44=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
#
# Ethernet (1000 Mbit)
#
CONFIG_E1000=y
CONFIG_R8169=y
CONFIG_SKY2=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
#
# Wan interfaces
#
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
#
# Telephony Support
#
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_EVDEV=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
#
# Watchdog Cards
#
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
#
# I2C support
#
#
# SPI support
#
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
#
# V4L USB devices
#
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=m
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
#
# Logo configuration
#
#
# Speakup console speech
#
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
#
# Open Sound System
#
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_WACOM=m
#
# USB Imaging devices
#
#
# USB Network Adapters
#
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
#
# USB Miscellaneous drivers
#
#
# USB DSL modem support
#
#
# USB Gadget Support
#
#
# MMC/SD Card support
#
#
# LED devices
#
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SMB_FS=y
#
# Partition Types
#
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
CONFIG_CRYPTO_DEFLATE=y
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
|
| Code: |
# hdparm -i /dev/hda
/dev/hda:
Model=PIONEER DVD-RW DVR-108, FwRev=1.04, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma3 *udma4
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
* signifies the current active mode
# hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
# hdparm -Tt /dev/hdd
/dev/hdd:
Timing cached reads: 1690 MB in 2.00 seconds = 844.55 MB/sec
BLKFLSBUF failed: Function not implemented
Timing buffered disk reads: 8 MB in 3.47 seconds = 2.31 MB/sec
BLKFLSBUF failed: Function not implemented
|
_________________
-Khiz |
|
| Back to top |
|
 |
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Wed May 16, 2007 8:21 pm Post subject: |
|
|
Doesn't look like you have a PATA driver for your hardware. Add that into the kernel,or as a module, and you should have a fully implemented optical drive driver.
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54808
Location: 56N 3W
|
| Posted: Wed May 16, 2007 8:23 pm Post subject: |
|
|
khiz,
Welcome to Gentoo.
We need your lspci output so we can help you match the kernel to your hardware.
You are right about no DMA being a problem with DVD playback
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Wed May 16, 2007 8:27 pm Post subject: |
|
|
Doesn't look like you have a PATA driver for your hardware. Add that into the kernel,or as a module, and you should have a fully implemented optical drive driver.
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54808
Location: 56N 3W
|
| Posted: Wed May 16, 2007 8:39 pm Post subject: |
|
|
erik258,
I bet its an Intel ICH7 chipset
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Wed May 16, 2007 9:02 pm Post subject: |
|
|
If that's true, you will want
| Code: | | -> Device Drivers -> Serial ATA (prod) and Parallel ATA (experimental) drivers -> ATA device support (ATA [=y]) |
| Quote: |
CONFIG_ATA_PIIX:
This option enables support for ICH5/6/7/8 Serial ATA and support for PATA on the Intel PIIX3/PIIX4/ICH series PATA host controllers. |
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
sonicbhoc
Veteran
Joined: 24 Oct 2005
Posts: 1805
Location: In front of the computer screen
|
| Posted: Wed May 16, 2007 9:08 pm Post subject: |
|
|
If it's true, you also might want to try completely disabling ATA/ATAPI/MFM/RLL support, because DMA wouldn't work at all with it on in my computer's config.
_________________
I'm too lazy to keep this stupid signature up to date, so here's something more interesting:
My friend Hetdegon can draw if you ask me.
Now using PClinuxOS on my laptop and Gentoo on my desktop and new laptop. |
|
| Back to top |
|
|
khiz
n00b
Joined: 08 Mar 2007
Posts: 5
|
| Posted: Wed May 16, 2007 9:09 pm Post subject: |
|
|
lspci! *facepalms* Sorry, here it is:
| Code: |
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5952
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:1a.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:1d.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller (rev 02)
00:1e.0 ISA bridge: ALi Corporation Unknown device 1575
00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c8)
00:1f.1 SATA controller: ALi Corporation ULi M5288 SATA (rev 10)
01:11.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
01:11.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
01:11.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
01:13.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
01:14.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
04:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 7249
04:00.1 Display controller: ATI Technologies Inc Unknown device 7269
|
Now to have a look at PATA drivers... Do I need any IDE options set?
_________________
-Khiz |
|
| Back to top |
|
|
sonicbhoc
Veteran
Joined: 24 Oct 2005
Posts: 1805
Location: In front of the computer screen
|
| Posted: Wed May 16, 2007 9:11 pm Post subject: |
|
|
If you don't get dma AFTER installing the proper driver, try turning off IDE support completely. Unfortunately, I have to eat and clean the dishes, before I can assist anymore...
_________________
I'm too lazy to keep this stupid signature up to date, so here's something more interesting:
My friend Hetdegon can draw if you ask me.
Now using PClinuxOS on my laptop and Gentoo on my desktop and new laptop. |
|
| Back to top |
|
|
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Wed May 16, 2007 9:14 pm Post subject: |
|
|
| Quote: | | 00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c8) |
There it is!
| menuconfig wrote: |
CONFIG_PATA_ALI:
This option enables support for the ALi ATA interfaces found on the many ALi chipsets.
|
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54808
Location: 56N 3W
|
| Posted: Wed May 16, 2007 9:17 pm Post subject: |
|
|
khiz,
You have an | Code: | | 00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c8) |
IDE driver and you are using the experimental PATA driver from libsata.
Does the old PATA ALI M15x3 chipset support work for you ?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
khiz
n00b
Joined: 08 Mar 2007
Posts: 5
|
| Posted: Thu May 17, 2007 3:36 pm Post subject: |
|
|
CONFIG_PATA_ALI doesn't seem to work, but neither does BLK_DEV_ALI15X3. I don't really understand the distinction, though, I thought IDE was PATA?
_________________
-Khiz |
|
| Back to top |
|
|
Pandor
Tux's lil' helper
Joined: 16 Nov 2005
Posts: 128
Location: Belgium
|
| Posted: Sun May 20, 2007 7:40 am Post subject: |
|
|
| khiz wrote: | | CONFIG_PATA_ALI doesn't seem to work, but neither does BLK_DEV_ALI15X3. I don't really understand the distinction, though, I thought IDE was PATA? |
BLK_DEV_ALI15X3 is the *Old* driver which uses the *old* IDE framework.
Since thise framework is somewhat flawned, they are now moving everything to the new libata framework.
So, only enable one, or the other (eighter completely disable IDE, and then enable libata/PATA_ALI, or disable PATA_ALI, and enable ide/BLK_DEV_ALI15X3)
libata/pata status report
Do note that when you move from the IDE framework, to libata, you'll have to change your /etc/fstab (and kernel *root* boot parameter), as all pata devices are now seen as sata/scsi devices e.g. /dev/hda, will be /dev/sda. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54808
Location: 56N 3W
|
| Posted: Sun May 20, 2007 12:01 pm Post subject: |
|
|
khiz,
Longer shot ... go back to the IDE section of the kernel and set it up [url=https://forums.gentoo.org/viewtopic-p-3492195.html#3492195like this[/url] with two exceptions.
1. Use the ALI M15x3 chipset support option in place of Intel PIIXn chipsets support (for your chuipset)
2. Turn off Generic PCI IDE Chipset Support.
The Generic PCI IDE Chipset Support option provides limited (no DMA) functionality and in most but not all cases is supported by the additional chip set drivers. However, in some cases, this mix and match fails. IDE may not work at all this way too.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
energyman76b
Advocate
Joined: 26 Mar 2003
Posts: 2048
Location: Germany
|
| Posted: Sun May 20, 2007 12:55 pm Post subject: |
|
|
If you use libata, this happens:
-the devices will usually become 'scsi' devices - with the scsi naming scheme.
-hdparm stops working
-and dma works out of the box.
Your dmesg would be a lot more interessting than lspci.
here a dmesg with ALI/ULI chipset and libata-Pata driver:
[ 36.745781] ata2: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ff00 irq 14
[ 36.746334] ata3: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ff08 irq 15
[ 36.746880] scsi1 : pata_ali
[ 36.904146] ata2.00: ATA-7: SAMSUNG SP1213N, TL100-23, max UDMA/100
[ 36.904427] ata2.00: 234493056 sectors, multi 16: LBA48
[ 36.910800] ata2.00: configured for UDMA/100
[ 36.911080] scsi2 : pata_ali
[ 37.223663] ata3.00: ATAPI, max UDMA/33
[ 37.383420] ata3.00: configured for UDMA/33
[ 37.383742] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP1213N TL10 PQ: 0 ANSI: 5
[ 37.384327] SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
[ 37.384613] sdb: Write Protect is off
[ 37.384890] sdb: Mode Sense: 00 3a 00 00
[ 37.384900] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.385448] SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
[ 37.385733] sdb: Write Protect is off
[ 37.386009] sdb: Mode Sense: 00 3a 00 00
[ 37.386019] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.386548] sdb: sdb1 sdb3 sdb4 < sdb5 sdb6 >
[ 37.430238] sd 1:0:0:0: Attached scsi disk sdb
[ 37.430556] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 37.431612] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.18 PQ: 0 ANSI: 5
[ 37.434989] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 37.435270] Uniform CD-ROM driver Revision: 3.20
[ 37.435582] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 37.435624] sr 2:0:0:0: Attached scsi generic sg2 type 5
But if you don't have to, don't use the PATA drivers from libata - highly experimental stuff. Use the IDE-drivers in the IDE section.
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
and remove the pata-ali driver. You can use sata+'normal' ide parallel without any problems.
Oh, and recheck your config. You are compiling in so many crap, I can hardly believe that you need all of it.
_________________
Study finds stunning lack of racial, gender, and economic diversity among middle-class white males
I identify as a dirty penismensch. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54808
Location: 56N 3W
|
| Posted: Sun May 20, 2007 1:42 pm Post subject: |
|
|
energyman76b,
hdparm -tT should still work to measure the data rates.
What transfer speeds do you get with a) a data CDROM and b) a data DVD. Test with 'pressed' disks if possible
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
energyman76b
Advocate
Joined: 26 Mar 2003
Posts: 2048
Location: Germany
|
| Posted: Sun May 20, 2007 1:51 pm Post subject: |
|
|
| NeddySeagoon wrote: | energyman76b,
hdparm -tT should still work to measure the data rates.
What transfer speeds do you get with a) a data CDROM and b) a data DVD. Test with 'pressed' disks if possible |
yeah, -Tt should work, but 2mb/sec is not too bad - that is 13x.
But you are right, he should retry with a different medium.
I would still like to see his dmesg...
_________________
Study finds stunning lack of racial, gender, and economic diversity among middle-class white males
I identify as a dirty penismensch. |
|
| Back to top |
|
|
khiz
n00b
Joined: 08 Mar 2007
Posts: 5
|
| Posted: Tue May 22, 2007 2:52 pm Post subject: |
|
|
Thanks for the replies, everyone; it still doesn't work though. I've tried removing the libata stuff, but I'm not sure if it's right. I probably haven't disabled enough because I want to make sure my SATA hard-drive will work.
Here's dmesg:
| Code: | Linux version 2.6.19-gentoo-r5 (root@khiz) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Feb 27 19:57:26 GMT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS)
BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 262048) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262048
early_node_map[1] active PFN ranges
0: 0 -> 262048
On node 0 totalpages: 262048
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32417 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 ACPIAM ) @ 0x000fad00
ACPI: RSDT (v001 A M I OEMRSDT 0x03000629 MSFT 0x00000097) @ 0x3ffa0000
ACPI: FADT (v002 A M I OEMFACP 0x03000629 MSFT 0x00000097) @ 0x3ffa0200
ACPI: MADT (v001 A M I OEMAPIC 0x03000629 MSFT 0x00000097) @ 0x3ffa0390
ACPI: MCFG (v001 A M I OEMMCFG 0x03000629 MSFT 0x00000097) @ 0x3ffa03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x03000629 MSFT 0x00000097) @ 0x3ffae040
ACPI: DSDT (v001 A0466 A0466001 0x00000001 INTL 0x02002026) @ 0x00000000
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf700000)
Detected 2405.675 MHz processor.
Built 1 zonelists. Total pages: 260001
Kernel command line: root=/dev/sda5 vga=775
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x60
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031920k/1048192k available (3528k kernel code, 15688k reserved, 1563k data, 268k init, 130688k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0679000 - 0xc06bc000 ( 268 kB)
.data : 0xc047200f - 0xc05f8e30 (1563 kB)
.text : 0xc0100000 - 0xc047200f (3528 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4815.20 BogoMIPS (lpj=9630418)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 841 Objects with 60 Devices 244 Methods 20 Regions
ACPI Namespace successfully loaded at root c07201b0
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 00
Total of 1 processors activated (4815.20 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9
evgpeblk-0951 [04] ev_create_gpe_block : GPE 40 to 5F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:...................................................................................................................................................................
Initialized 19/20 Regions 30/30 Fields 38/38 Buffers 76/77 Packages (850 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 64 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0900-093f claimed by ali7101 ACPI
Boot video device is 0000:04:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0d: ioport range 0xc00-0xc0f has been reserved
pnp: 00:0d: ioport range 0xd00-0xd0f has been reserved
pnp: 00:0d: ioport range 0xa20-0xa2f has been reserved
pnp: 00:0d: ioport range 0xa30-0xa3f has been reserved
ACPI: PCI Interrupt 0000:01:11.2[B] -> GSI 19 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dfcfb000-dfcfb7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:01:13.0[A] -> GSI 20 (level, low) -> IRQ 17
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfcfb800-dfcfbfff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:02.0
IO window: e000-efff
MEM window: dff00000-dfffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:05.0
IO window: d000-dfff
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: c000-cfff
MEM window: dfd00000-dfdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1a.0
IO window: b000-bfff
MEM window: dfc00000-dfcfffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:1a.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/W DEBUG].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Getting cpuindex for acpiid 0x2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.10 addr 0xdfdfc000 irq 18 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:31:00:19:6e
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
netconsole: not configured, aborting
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151093d5e]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800009c3622]
hdb: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdd: SONY DVD-ROM DDU1613, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
ide-floppy driver 0.99.newide
3ware Storage Controller device driver for Linux v1.26.02.001.
ahci 0000:00:1f.1: version 2.0
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 16
ahci 0000:00:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.1: flags: ncq ilck pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xF8866D00 ctl 0x0 bmdma 0x0 irq 219
ata2: SATA max UDMA/133 cmd 0xF8866D80 ctl 0x0 bmdma 0x0 irq 219
ata3: SATA max UDMA/133 cmd 0xF8866E00 ctl 0x0 bmdma 0x0 irq 219
ata4: SATA max UDMA/133 cmd 0xF8866E80 ctl 0x0 bmdma 0x0 irq 219
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6, max UDMA/100, 488397168 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD2500PD-00F 05.0 PQ: 0 ANSI: 5
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Maxtor 6B160M0 BANC PQ: 0 ANSI: 5
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:1c.3: EHCI Host Controller
ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1c.3: debug port 1
ehci_hcd 0000:00:1c.3: irq 19, io mem 0xdfbff800
ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 20
ohci_hcd 0000:00:1c.0: OHCI Host Controller
ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:1c.0: irq 20, io mem 0xdfbfc000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:1c.1: OHCI Host Controller
ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:1c.1: irq 18, io mem 0xdfbfd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:1c.2: OHCI Host Controller
ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:1c.2: irq 16, io mem 0xdfbfe000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1c.0-1
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1c.0-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
Intel 810 + AC97 Audio, version 1.01, 19:56:15 Feb 27 2007
oprofile: using NMI interrupt.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 268k freed
input: Wacom Graphire4 4x5 as /class/input/input3
usbcore: registered new interface driver wacom
drivers/usb/input/wacom_sys.c: v1.46:USB Wacom Graphire and Wacom Intuos tablet driver
ACPI: PCI Interrupt 0000:01:11.0[A] -> GSI 18 (level, low) -> IRQ 18
ALSA /var/tmp/portage/media-sound/alsa-driver-1.0.14_rc2-r1/work/alsa-driver-1.0.14rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c:1477: Installing spdif_bug patch: Audigy 2 ZS [SB0350]
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
[fglrx] module loaded - fglrx 8.35.5 [Mar 27 2007] on minor 0
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 268304384
[fglrx] free LFB = 250474496
[fglrx] max single LFB = 250474496
[fglrx] total Inv = 268435456
[fglrx] free Inv = 268435456
[fglrx] max single Inv = 268435456
[fglrx] total TIM = 0
eth0: no IPv6 routers present
process `nslookup' is using obsolete setsockopt SO_BSDCOMPAT
|
And, with energyman76b's section, the relevant part of .config:
| Code: | #
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
|
_________________
-Khiz |
|
| Back to top |
|
|
energyman76b
Advocate
Joined: 26 Mar 2003
Posts: 2048
Location: Germany
|
| Posted: Tue May 22, 2007 5:43 pm Post subject: |
|
|
hm, your dmesg is not from the kernel, your config is from?
because in your config, you don't have ide-floppy set, but your dmesg shows it.
Your dmesg also talks about a 3ware controller - if that is the controller your drives are attached to, you need that driver in your config too!
_________________
Study finds stunning lack of racial, gender, and economic diversity among middle-class white males
I identify as a dirty penismensch. |
|
| Back to top |
|
|
erik258
Advocate
Joined: 12 Apr 2005
Posts: 2650
Location: Twin Cities, Minnesota, USA
|
| Posted: Tue May 22, 2007 7:22 pm Post subject: |
|
|
| Code: | Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151093d5e]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d800009c3622]
hdb: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdd: SONY DVD-ROM DDU1613, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache |
Whatever kernel this boot is from, it doesn't have support for your ide controller.
if you are installing 2.6.19 you might want to get a more recent, if it doesn't have the driver you need
_________________
Configuring a Firewall? Try my iptables configuration
LinuxCommando.com is my blog for linux-related scraps and tidbits. Stop by for a visit! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
