| View previous topic :: View next topic |
| Author |
Message |
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10590
Location: Somewhere over Atlanta, Georgia
|
 Posted: Fri Jun 08, 2007 11:13 am Post subject: |
 |
|
| MrEntropy wrote: | | john_r_graham wrote: | "kode" is still not at 3.5.7, which causes a long list of blocks on my system.
- John |
I'm having this problem as well. Is there a graceful way to get past it until kode is available? |
Yes! It's been described on the thread. I followed jmbsvicetto's advice and copied the kode-3.5.6.ebuild to kode-3.5.7.ebuild and then digested it, like so: | Code: | mercury ~ # cd /usr/portage/kde-base/kode
mercury kode # cp kode-3.5.6.ebuild kode-3.5.7.ebuild
mercury kode # ebuild kode-3.5.7.ebuild digest
Appending /usr/portage to PORTDIR_OVERLAY...
>>> Creating Manifest for /usr/portage/kde-base/kode
mercury kode # |
Actually, I had to do this for several packages, but that's the general technique.
- John |
|
| Back to top |
|
 |
jmbsvicetto
Moderator
Joined: 27 Apr 2005
Posts: 4734
Location: Angra do Heroísmo (PT)
|
| Posted: Fri Jun 08, 2007 2:08 pm Post subject: |
|
|
| john_r_graham wrote: | | MrEntropy wrote: | | john_r_graham wrote: | "kode" is still not at 3.5.7, which causes a long list of blocks on my system.
- John |
I'm having this problem as well. Is there a graceful way to get past it until kode is available? |
Yes! It's been described on the thread. I followed jmbsvicetto's advice and copied the kode-3.5.6.ebuild to kode-3.5.7.ebuild and then digested it, like so: | Code: | mercury ~ # cd /usr/portage/kde-base/kode
mercury kode # cp kode-3.5.6.ebuild kode-3.5.7.ebuild
mercury kode # ebuild kode-3.5.7.ebuild digest
Appending /usr/portage to PORTDIR_OVERLAY...
>>> Creating Manifest for /usr/portage/kde-base/kode
mercury kode # |
Actually, I had to do this for several packages, but that's the general technique.
- John |
Actually, I was wrong.
This package as a few others haven't changed from 3.5.6 to 3.5.7. All the correct dep strings should now be in place. For those to work, users running the stable branch need to stop unmasking kde packages with =<package>-3.5.7 and use =<package-3.5*> on /etc/portage/package.keywords.
[edit]Corrected wrong syntax - one should use =<package>-3.5* and not ~<package>-3.5*[/edit]
_________________
Jorge.
Your twisted, but hopefully friendly daemon.
AMD64 / x86 / Sparc Gentoo
Help answer || emwrap.sh
Last edited by jmbsvicetto on Fri Jun 08, 2007 6:21 pm; edited 1 time in total |
|
| Back to top |
|
|
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10590
Location: Somewhere over Atlanta, Georgia
|
| Posted: Fri Jun 08, 2007 3:02 pm Post subject: |
|
|
You were right at one point, though, because there were some dependencies in the newly released 3.5.7 ebuilds for nonexistent packages (e.g., kode-3.5.7). I knew it would be cleaned up, though.
- John |
|
| Back to top |
|
|
carpman
Advocate
Joined: 20 Jun 2002
Posts: 2202
Location: London - UK
|
| Posted: Fri Jun 08, 2007 10:24 pm Post subject: |
|
|
| carpman wrote: | Hello, i getting problems with couple of 3.5.6 apps, though still running 3.5.5
| Code: |
[blocks B ] <kde-base/kdesktop-3.5.6-r1 (is blocking kde-base/kdebase-kioslaves-3.5.7)
[blocks B ] <=kde-base/kmail-3.5.6-r1 (is blocking kde-base/libkdepim-3.5.7)
|
this even though have added them to mask
| Code: |
cat /etc/portage/package.mask
>=kde-base/kdesktop-3.5.6-r1
>=kde-base/kmail-3.5.6-r1
|
cheers |
anyone any ideas?
cheers
_________________
Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
| Back to top |
|
|
katafitos
n00b
Joined: 22 Nov 2006
Posts: 56
Location: Greece
|
| Posted: Fri Jun 08, 2007 10:45 pm Post subject: |
|
|
| carpman wrote: |
anyone any ideas?
cheers |
if you would like to upgrade from 3.5.5 to 3.5.7 then you should unmerge kmail and kdesktop first |
|
| Back to top |
|
|
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10590
Location: Somewhere over Atlanta, Georgia
|
| Posted: Sat Jun 09, 2007 1:30 am Post subject: |
|
|
| jmbsvicetto wrote: | | For those to work, users running the stable branch need to stop unmasking kde packages with =<package>-3.5.7 and use =<package-3.5*> on /etc/portage/package.keywords. |
Worked perfectly. Thanks.
- John |
|
| Back to top |
|
|
thagame
Apprentice
Joined: 07 Mar 2004
Posts: 210
Location: Windsor, Ontario, Canada
|
| Posted: Sat Jun 09, 2007 6:37 am Post subject: Re: Problem with kdelibs-3.5.7 |
|
|
| dufeu wrote: | I'm having a problem with kdelibs on one of three machines. The other two which successfully compiled kdelibs are an AMD64 based and an Athlon based PC. The problem PC is Athlon based.
| Code: | kab2kabc.cpp:210: error: 'PhoneNumber' was not declared in this scope
kab2kabc.cpp:212: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:214: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:216: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:218: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:220: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:222: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:224: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:226: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:228: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:230: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:232: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:234: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:236: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:238: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:240: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:242: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:244: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:246: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:248: error: request for member 'setNickName' in 'a', which is of non-class type 'int'
kab2kabc.cpp:250: error: request for member 'setOrganization' in 'a', which is of non-class type 'int'
kab2kabc.cpp:252: error: request for member 'setRole' in 'a', which is of non-class type 'int'
kab2kabc.cpp:254: error: request for member 'setBirthday' in 'a', which is of non-class type 'int'
kab2kabc.cpp:256: error: request for member 'setUrl' in 'a', which is of non-class type 'int'
kab2kabc.cpp:265: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:267: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:269: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:272: error: request for member 'insertCustom' in 'a', which is of non-class type 'int'
kab2kabc.cpp:276: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:276: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp:277: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:277: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp:278: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:278: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp: In function 'void importKab(KABC::AddressBook*, bool, bool)':
kab2kabc.cpp:320: error: 'Addressee' was not declared in this scope
kab2kabc.cpp:320: error: expected `;' before 'a'
kab2kabc.cpp:328: error: 'a' was not declared in this scope
kab2kabc.cpp:331: error: 'a' was not declared in this scope
kab2kabc.cpp:333: error: 'a' was not declared in this scope
kab2kabc.cpp:339: error: 'a' was not declared in this scope
kab2kabc.cpp:348: error: 'a' was not declared in this scope
kab2kabc.cpp:366: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:367: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:367: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:368: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:369: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:370: error: 'PhoneNumber' was not declared in this scope
kab2kabc.cpp:385: error: 'Address' was not declared in this scope
kab2kabc.cpp:385: error: expected `;' before 'adr'
kab2kabc.cpp:387: error: 'adr' was not declared in this scope
kab2kabc.cpp: In function 'int main(int, char**)':
kab2kabc.cpp:472: warning: 'save' is deprecated (declared at stdaddressbook.h:86)
make[3]: *** [kab2kabc.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7/kabc'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7/kabc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7'
make: *** [all] Error 2
!!! ERROR: kde-base/kdelibs-3.5.7 failed. |
Any thoughts?
| Code: | Portage 2.1.2.7 (default-linux/x86/2007.0/desktop, gcc-4.1.2, glibc-2.5-r2, 2.6.19.1 i686)
=================================================================
System uname: 2.6.19.1 i686 AMD Athlon(tm) XP
Gentoo Base System release 1.12.10
Timestamp of tree: Sun, 27 May 2007 19:50:01 +0000
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled]
dev-java/java-config: 1.3.7, 2.0.33
dev-lang/python: 2.3.6-r2, 2.4.4-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.61
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.17
sys-devel/gcc-config: 1.3.16
sys-devel/libtool: 1.5.23b
virtual/os-headers: 2.6.21
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O2 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /opt/openjms/config /usr/NX/etc /usr/NX/home /usr/kde/3.2/share/config /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/php/apache1-php5/ext-active/ /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c"
CXXFLAGS="-march=athlon-xp -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="http://mirror.datapipe.net/gentoo http://mirror.datapipe.net/gentoo ftp://206.75.217.181/"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage /usr/local/overlays/nx"
SYNC="rsync://rsync.samerica.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext X Xaw3d a52 aac aalib acc accessibility acl acpi alsa apache2 asf audiofile avi avifile berkdb bitmap-fonts bonobo boost bzip2 cairo cdr cli cracklib crypt cups curl dba dbus dga dio directfb divx4linux doc dri dts dv dvd dvdr dvdread eds emboss encode esd ethereal evo exit extrafilters fam fbcon ffmpeg firefox flac flash font-server fortran freetds gcj gd gdbm ggi gif gimpprint gnome gphoto2 gpm gs gstreamer gtk gtkhtml guile gzip hal iconv icq idn imagemagic imagemagick imap immqt inkjar innodb insecure-savers ipv6 isdnlog jabber java javascript jbig jikes jpeg jpeg2 jpeg2k junit kde kdexdeltas kerberos lcms ldap lesstiff libg++ logrotate lzo mad maildir matroska midi mikmod mjpeg mmx mng mono mozsvg mp3 mpeg mudflap musepack mysql mysqli ncurses nls nptl nptlonly nsplugin nxclient odbc offensive ogg opengl openmp oscar oss pam pcre pda pdf perl plugin png postgres povray ppds pppd python qt3 qt3support qt4 quicktime readline real reflection ruby samba sasl scanner sdl session slp soap speex spell spl sse ssl subversion svg svga tcltk tcpd theora threads tiff truetype truetype-fonts type1-fonts unicode usb utempter v4l v4l2 vcd visualization vorbis win32codecs winf wmf wxwindows x86 xanim xcomposite xeo xforms xine xinerama xml xml2 xorg xprint xscreensaver xv xvid xvmc yahoo zlib" ALSA_CARDS="via82xx" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="vga via vesa"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
|
Same problem. Anyone solve this? |
|
| Back to top |
|
|
Vegan
Tux's lil' helper
Joined: 29 Mar 2007
Posts: 133
|
| Posted: Sat Jun 09, 2007 9:17 am Post subject: |
|
|
I saw problem on bugzilla that I'm also experiencing - sometimes konqueror after couple of hours start's to taking 100% of cpu ? Anyone have the same problem ?
_________________
Go Vegan! For The Sake of Animals
//Gentoo 2007.0/desktop, portage- 2.1.3_rc8, kernel @ 2.6.22-kamikaze1 (CFSv19) i686, "/" REISER4, ~x86, gcc-4.1.2, glibc-2.5-r3
//P4 2.4Ghz, 768 RAM , ATI Radeon X1600pro AGP, P4P800, SB Live ! 5.1, WDC 80GB |
|
| Back to top |
|
|
jmbsvicetto
Moderator
Joined: 27 Apr 2005
Posts: 4734
Location: Angra do Heroísmo (PT)
|
| Posted: Sat Jun 09, 2007 12:12 pm Post subject: |
|
|
| Vegan wrote: | | I saw problem on bugzilla that I'm also experiencing - sometimes konqueror after couple of hours start's to taking 100% of cpu ? Anyone have the same problem ? |
Vegan,
in case you haven't read the last updates to the bug, that bug ended up being caused by some apps in the xeffects overlay - probably compiz or beryl.
_________________
Jorge.
Your twisted, but hopefully friendly daemon.
AMD64 / x86 / Sparc Gentoo
Help answer || emwrap.sh
|
|
| Back to top |
|
|
jmbsvicetto
Moderator
Joined: 27 Apr 2005
Posts: 4734
Location: Angra do Heroísmo (PT)
|
| Posted: Sat Jun 09, 2007 12:16 pm Post subject: Re: Problem with kdelibs-3.5.7 |
|
|
Hi.
| thagame wrote: | | dufeu wrote: | I'm having a problem with kdelibs on one of three machines. The other two which successfully compiled kdelibs are an AMD64 based and an Athlon based PC. The problem PC is Athlon based.
| Code: | kab2kabc.cpp:210: error: 'PhoneNumber' was not declared in this scope
[snips]
!!! ERROR: kde-base/kdelibs-3.5.7 failed. |
Any thoughts?
[/code] |
Same problem. Anyone solve this? |
You should open a bug about this if it isn't caused by the kdeenablefinal use flag. Also try building kdelibs with MAKEOPTS="-j1".
_________________
Jorge.
Your twisted, but hopefully friendly daemon.
AMD64 / x86 / Sparc Gentoo
Help answer || emwrap.sh
|
|
| Back to top |
|
|
PARENA
Guru
Joined: 06 Jan 2003
Posts: 349
|
| Posted: Sun Jun 10, 2007 12:53 am Post subject: No problems |
|
|
Just wanted you to know I'm running it (AMD64) without any problems. Stable as far as I'm concerned, or will we wait 'til 4.0 is out? 
_________________
AMD64 X2 3800+ | ASUS M2N-E | 3G Kingston DDR2 | 1T Maxtor SATA | 250G Maxtor IDE | 250G Maxtor SATA | ASUS EN7800GT silent |
|
| Back to top |
|
|
thagame
Apprentice
Joined: 07 Mar 2004
Posts: 210
Location: Windsor, Ontario, Canada
|
| Posted: Sun Jun 10, 2007 1:20 am Post subject: Re: Problem with kdelibs-3.5.7 |
|
|
I'm having a problem with kdelibs on one of three machines. The other two which successfully compiled kdelibs are an AMD64 based and an Athlon based PC. The problem PC is Athlon based.
| Code: | kab2kabc.cpp:210: error: 'PhoneNumber' was not declared in this scope
kab2kabc.cpp:212: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:214: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:216: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:218: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:220: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:222: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:224: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:226: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:228: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:230: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:232: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:234: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:236: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:238: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:240: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:242: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:244: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:246: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:248: error: request for member 'setNickName' in 'a', which is of non-class type 'int'
kab2kabc.cpp:250: error: request for member 'setOrganization' in 'a', which is of non-class type 'int'
kab2kabc.cpp:252: error: request for member 'setRole' in 'a', which is of non-class type 'int'
kab2kabc.cpp:254: error: request for member 'setBirthday' in 'a', which is of non-class type 'int'
kab2kabc.cpp:256: error: request for member 'setUrl' in 'a', which is of non-class type 'int'
kab2kabc.cpp:265: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:267: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:269: error: request for member 'insertEmail' in 'a', which is of non-class type 'int'
kab2kabc.cpp:272: error: request for member 'insertCustom' in 'a', which is of non-class type 'int'
kab2kabc.cpp:276: error: 'homeAddress' was not declared in this scope
kab2kabc.cpp:276: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp:277: error: 'businessAddress' was not declared in this scope
kab2kabc.cpp:277: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp:278: error: 'otherAddress' was not declared in this scope
kab2kabc.cpp:278: error: request for member 'insertAddress' in 'a', which is of non-class type 'int'
kab2kabc.cpp: In function 'void importKab(KABC::AddressBook*, bool, bool)':
kab2kabc.cpp:320: error: 'Addressee' was not declared in this scope
kab2kabc.cpp:320: error: expected `;' before 'a'
kab2kabc.cpp:328: error: 'a' was not declared in this scope
kab2kabc.cpp:331: error: 'a' was not declared in this scope
kab2kabc.cpp:333: error: 'a' was not declared in this scope
kab2kabc.cpp:339: error: 'a' was not declared in this scope
kab2kabc.cpp:348: error: 'a' was not declared in this scope
kab2kabc.cpp:366: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:367: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:367: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:368: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:369: error: 'PhoneNumber' has not been declared
kab2kabc.cpp:370: error: 'PhoneNumber' was not declared in this scope
kab2kabc.cpp:385: error: 'Address' was not declared in this scope
kab2kabc.cpp:385: error: expected `;' before 'adr'
kab2kabc.cpp:387: error: 'adr' was not declared in this scope
kab2kabc.cpp: In function 'int main(int, char**)':
kab2kabc.cpp:472: warning: 'save' is deprecated (declared at stdaddressbook.h:86)
make[3]: *** [kab2kabc.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7/kabc'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7/kabc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/kde-base/kdelibs-3.5.7/work/kdelibs-3.5.7'
make: *** [all] Error 2
!!! ERROR: kde-base/kdelibs-3.5.7 failed. |
Same problem. Anyone solve this? |
|
| Back to top |
|
|
desultory
Bodhisattva
Joined: 04 Nov 2005
Posts: 9410
|
|
| Back to top |
|
|
nabla²
Apprentice
Joined: 17 May 2005
Posts: 280
|
| Posted: Tue Jun 12, 2007 1:44 pm Post subject: kde3.5.7: raising of hidden panel: bug or feature? |
|
|
Hi,
here my desktop. The left panel automatically hides. It comes back when I touch the left border of the screen but on the full length of the screen. In kde 3.5.6 it was only on the border of the visible part of the panel. This I prefer. Any idea how to set this?
_________________
Gentoo on Intel Core Duo 2 E6750, Gigabyte P35-DS3P, NVIDIA 8800GTS (amd64) |
|
| Back to top |
|
|
desultory
Bodhisattva
Joined: 04 Nov 2005
Posts: 9410
|
| Posted: Wed Jun 13, 2007 5:16 am Post subject: |
|
|
| Merged the above post. |
|
| Back to top |
|
|
carpman
Advocate
Joined: 20 Jun 2002
Posts: 2202
Location: London - UK
|
| Posted: Wed Jun 13, 2007 2:01 pm Post subject: |
|
|
Since updating i have couple of problems.
1. kontact crashes on loading Basket (integrated) then won't start at all, kmail does not integrate?
2. Nothing visible when loading kmail config window, loads config window ok, can see buttons and thin white to left but nothing else?
cheers
_________________
Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
| Back to top |
|
|
Zapotek
n00b
Joined: 08 Apr 2004
Posts: 33
|
| Posted: Fri Jun 15, 2007 12:42 pm Post subject: |
|
|
hi!
just want to upgrade from 3.5.5 to 3.5.7.
but when using the command: "emerge -av kdebase-startkde" only kde-base/kdebase-startkde-3.5.5 is available to install.
any suggestions?
thx. |
|
| Back to top |
|
|
mark_alec
Bodhisattva
Joined: 11 Sep 2004
Posts: 6066
Location: Melbourne, Australia
|
| Posted: Fri Jun 15, 2007 12:58 pm Post subject: |
|
|
Make sure you have --synced, and that you have keyworded kdebase-startkde ~arch, as 3.5.7 is in the tree.
_________________
www.gentoo.org.au || #gentoo-au |
|
| Back to top |
|
|
Zapotek
n00b
Joined: 08 Apr 2004
Posts: 33
|
| Posted: Fri Jun 15, 2007 1:42 pm Post subject: |
|
|
thx a lot! it works.
but why is it necessary to put kdebase-startkde ~arch manually in the tree? |
|
| Back to top |
|
|
mark_alec
Bodhisattva
Joined: 11 Sep 2004
Posts: 6066
Location: Melbourne, Australia
|
| Posted: Fri Jun 15, 2007 3:18 pm Post subject: |
|
|
| Zapotek wrote: | | but why is it necessary to put kdebase-startkde ~arch manually in the tree? |
Because it is not stable on any architectures yet. See Mixing Stable with Testing in the Gentoo Handbook.
_________________
www.gentoo.org.au || #gentoo-au |
|
| Back to top |
|
|
Zapotek
n00b
Joined: 08 Apr 2004
Posts: 33
|
| Posted: Fri Jun 15, 2007 4:29 pm Post subject: |
|
|
| ok, thx a lot! |
|
| Back to top |
|
|
nullchar
n00b
Joined: 21 Jun 2007
Posts: 1
|
| Posted: Thu Jun 21, 2007 1:18 pm Post subject: |
|
|
During the initial configuring of kcontrol
| Code: | checking linux/raw.h usability... no
checking linux/raw.h presence... yes
configure: WARNING: linux/raw.h: present but cannot be compiled
configure: WARNING: linux/raw.h: check for missing prerequisite headers?
configure: WARNING: linux/raw.h: see the Autoconf documentation
configure: WARNING: linux/raw.h: section "Present But Cannot Be Compiled"
configure: WARNING: linux/raw.h: proceeding with the preprocessor's result
configure: WARNING: linux/raw.h: in the future, the compiler will take precedence
|
as the compiling start it ends up
| Code: | Making all in pics
make[4]: Entering directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol/background/pics'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol/background/pics'
make[3]: Leaving directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol/background'
Making all in dnssd
make[3]: Entering directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol/dnssd'
rm -rf configdialog.h;
/usr/qt/3/bin/uic -L /usr/kde/3.5/lib/kde3/plugins/designer -nounload ./configdialog.ui | /usr/bin/perl -pi -e "s,public QWizard,public KWizard,g; s,#include <qwizard.h>,#include <kwizard.h>,g" >> configdialog.h ;
/usr/qt/3/bin/moc configdialog.h -o configdialog.moc
/usr/qt/3/bin/moc ./kcmdnssd.h -o kcmdnssd.moc
rm -f configdialog.cpp
echo '#include <kdialog.h>' > configdialog.cpp
echo '#include <klocale.h>' >> configdialog.cpp
/usr/qt/3/bin/uic -L /usr/kde/3.5/lib/kde3/plugins/designer -nounload -tr tr2i18n -i configdialog.h ./configdialog.ui > configdialog.cpp.temp ; ret=$?; \
/usr/bin/perl -pe "s,tr2i18n( \"\" ),QString::null,g" configdialog.cpp.temp | /usr/bin/perl -pe "s,tr2i18n( \"\"\, \"\" ),QString::null,g" | /usr/bin/perl -pe "s,image([0-9][0-9]*)_data,img\$1_configdialog,g" | /usr/bin/perl -pe "s,: QWizard\(,: KWizard(,g" >> configdialog.cpp ;\
rm -f configdialog.cpp.temp ;\
if test "$ret" = 0; then echo '#include "configdialog.moc"' >> configdialog.cpp; else rm -f configdialog.cpp ; exit $ret ; fi
creating kcm_kdnssd_la.all_cpp.cpp ...
/bin/sh ../../libtool --silent --tag=CXX --mode=compile i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/kde/3.5/include -I/usr/qt/3/include -I. -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -mtune=i686 -pipe -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fvisibility=hidden -fvisibility-inlines-hidden -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -c -o kcm_kdnssd_la.all_cpp.lo kcm_kdnssd_la.all_cpp.cpp
/bin/sh ../../libtool --silent --tag=CXX --mode=link i686-pc-linux-gnu-g++ -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -mtune=i686 -pipe -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -fvisibility=hidden -fvisibility-inlines-hidden -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -o kcm_kdnssd.la -rpath /usr/kde/3.5/lib/kde3 -avoid-version -module -no-undefined -Wl,--no-undefined -Wl,--allow-shlib-undefined -L/usr/kde/3.5/lib -L/usr/qt/3/lib kcm_kdnssd_la.all_cpp.lo -lkdnssd -lkdeui
/usr/lib/gcc/i686-pc-linux-gnu/4.1.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -lkdnssd
collect2: ld returned 1 exit status
make[3]: *** [kcm_kdnssd.la] Error 1
make[3]: Leaving directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol/dnssd'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7/kcontrol'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/kde-base/kcontrol-3.5.7/work/kcontrol-3.5.7'
make: *** [all] Error 2
!!! ERROR: kde-base/kcontrol-3.5.7 failed.
Call stack:
ebuild.sh, line 1629: Called dyn_compile
ebuild.sh, line 975: Called qa_call 'src_compile'
ebuild.sh, line 44: Called src_compile
kcontrol-3.5.7.ebuild, line 55: Called kde-meta_src_compile
kde-meta.eclass, line 380: Called kde_src_compile
kde.eclass, line 170: Called kde_src_compile 'all'
kde.eclass, line 340: Called kde_src_compile 'myconf' 'configure' 'make'
kde.eclass, line 336: Called die
!!! died running emake, kde_src_compile:make |
my make.conf
| Code: |
CFLAGS="-O2 -mtune=i686 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
ACCEPT_KEYWORDS="~x86"
MAKEOPTS="-j2"
AUTOCLEAN="yes"
PORT_LOGDIR="/var/log/portage"
PORTDIR_OVERLAY="/usr/local/portage/"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="i810 vesa"
FETCHCOMMAND="/usr/bin/wget -t 5 -T 60 --passive-ftp \${URI} -P \${DISTDIR}"
RESUMECOMMAND="/usr/bin/wget -c -t 5 -T 60 --passive-ftp \${URI} -P \${DISTDIR}"
GENTOO_MIRRORS="http://10.3.140.50/gentoo http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
SYNC="rsync://10.3.140.50/gentoo-portage"
#FETCHCOMMAND="rsync rsync://10.3.140.50/gentoo-packages/\${FILE} ${DISTDIR}"
LINGUAS="en_GB"
USE="'nptl -doc nptlonly sse sse2 mmx mmxext cpudetection wxGTK unicode kdeenablefinal arts alsa kde -gnome kdehiddenvisibility'" |
i am not able to compile kcontrol and other kde-3.5.7 updates |
|
| Back to top |
|
|
Vlad.Sharp
Guru
Joined: 08 Dec 2004
Posts: 337
Location: Cambridgeshire, UK
|
| Posted: Thu Jun 21, 2007 1:26 pm Post subject: |
|
|
It's a very long-aged dependency bug.
emerge --oneshot kdnssd-avahi
should fix it.  |
|
| Back to top |
|
|
zBrain
Apprentice
Joined: 14 Apr 2006
Posts: 182
|
| Posted: Thu Jun 21, 2007 6:07 pm Post subject: |
|
|
This is begging to be asked:
is there a timeline for this to go stable? Even 3.5.6 is still under a keyword mask. Will it ever be released? Obviously at this point I'd rather see .7, but I think this last cycle has been much slower than previous ones. .5 has some bugs I'm not fond of that I know are fixed....
Before you tell me to stop whining and unmask it, there's a lot to unmask and AFAIK no way to do it without adding 150 rules to your unmask file/directory. Plus I tried it and ran into a dependency hell that gave me flashbacks of Red Hat, which is good reason for it not to be released  but then what's holding up the other packages?
No, I'm not trying to start a flame war, I honestly want to know if I should be holding my breath. |
|
| Back to top |
|
|
desultory
Bodhisattva
Joined: 04 Nov 2005
Posts: 9410
|
| Posted: Fri Jun 22, 2007 4:09 am Post subject: |
|
|
| zBrain wrote: | | Before you tell me to stop whining and unmask it, there's a lot to unmask and AFAIK no way to do it without adding 150 rules to your unmask file/directory. Plus I tried it and ran into a dependency hell that gave me flashbacks of Red Hat, which is good reason for it not to be released but then what's holding up the other packages? |
If it is simply a matter that you do not want to manually add the packages to package.keywords, try using app-portage/autounmask as described in the topic "autounmask - unmasking packages the easy way". |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
