Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[UNSOLVED] fusion mbt device dies
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
alex.blackbit
Advocate
Advocate


Joined: 26 Jul 2005
Posts: 2397

PostPosted: Wed May 30, 2007 9:07 pm    Post subject: [UNSOLVED] fusion mbt device dies Reply with quote

hello everybody!

i have a lsi sas controller with a seagate sata drive.
Code:
03:02.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 02)
ST3400620NS
from time to time it is no more accessible with this in dmesg:
Code:
mptscsih: ioc0: attempting task abort! (sc=c1d89380)
sd 1:0:0:0:
        command: Log Sense: 4d 00 6f 00 00 00 00 00 04 00
mptscsih: ioc0: WARNING - TM Handler for type=1: IOC Not operational (0xffffffff)!
 Issuing HardReset!!
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
mptbase: ioc0 NOT READY WARNING!
mptbase: WARNING - (-1) Cannot recover ioc0
TMHandler: HardReset FAILED!!
mptscsih: ioc0: task abort: FAILED (sc=c1d89380)
mptscsih: ioc0: attempting bus reset! (sc=c1d89380)
sd 1:0:0:0:
        command: Log Sense: 4d 00 6f 00 00 00 00 00 04 00
mptscsih: ioc0: bus reset: FAILED (sc=c1d89380)
mptscsih: ioc0: Attempting host reset! (sc=c1d89380)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
mptbase: ioc0 NOT READY WARNING!
mptbase: WARNING - (-1) Cannot recover ioc0
sd 1:0:0:0: scsi: Device offlined - not ready after error recovery

after a reboot everything is fine again, but when the system is running i cannot do anything to get it running again.
does anybody have a clue what the problem could be?
Back to top
View user's profile Send private message
alex.blackbit
Advocate
Advocate


Joined: 26 Jul 2005
Posts: 2397

PostPosted: Fri Jun 01, 2007 1:28 am    Post subject: Reply with quote

i noticed, that on boot when udev starts i get the message
Code:
ata_id[1571]: main: HDIO_GET_IDENTITY failed for '/dev/.tmp-8-16'
maybe this helps a little bit...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum