| View previous topic :: View next topic |
| Author |
Message |
Simonheld
Apprentice
Joined: 20 Nov 2005
Posts: 151
Location: Deepest Black Bavaria
|
 Posted: Fri Jun 15, 2007 1:02 pm Post subject: Externe Festplatte (usb 2.0) |
 |
|
Hallo zusammen ...
gibt es eigentlich eine Möglichkeit eine externe Festplatte (HD-35PUKB),die laut Handbuch nur unter Windows und Mac Os X
läuft, auch unter linux(gentoo) einzubinden oder ist das auf jeden Fall ausgeschlossen?
vielen Dank schonmal... |
|
| Back to top |
|
 |
firefly
Watchman
Joined: 31 Oct 2002
Posts: 5329
|
| Posted: Fri Jun 15, 2007 1:05 pm Post subject: Re: Externe Festplatte (usb 2.0) |
|
|
| Simonheld wrote: | Hallo zusammen ...
gibt es eigentlich eine Möglichkeit eine externe Festplatte (HD-35PUKB),die laut Handbuch nur unter Windows und Mac Os X
läuft, auch unter linux(gentoo) einzubinden oder ist das auf jeden Fall ausgeschlossen?
vielen Dank schonmal... |
wenn du sie da hast einfach anstecken 
aber normalerweise sollte es da keine Probleme geben.
_________________
Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
| Back to top |
|
|
Simonheld
Apprentice
Joined: 20 Nov 2005
Posts: 151
Location: Deepest Black Bavaria
|
| Posted: Fri Jun 15, 2007 1:17 pm Post subject: |
|
|
| hm also die platte ist angesteckt ... vielleicht muss ich noch irgendwelche module laden ... weis aber nicht welche .... |
|
| Back to top |
|
|
firefly
Watchman
Joined: 31 Oct 2002
Posts: 5329
|
| Posted: Fri Jun 15, 2007 1:19 pm Post subject: |
|
|
was sagt dmesg? bzw hast du usb-storage in der kernel-konfiguration entweder fest oder als modul aktiviert?
_________________
Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
| Back to top |
|
|
Simonheld
Apprentice
Joined: 20 Nov 2005
Posts: 151
Location: Deepest Black Bavaria
|
| Posted: Fri Jun 15, 2007 1:26 pm Post subject: |
|
|
in der menuconfig
| Code: | | <*> USB Mass Storage support |
ich denke das ist gemeint oder?
demsg sagt:
Balrog linux # dmesg
Bootdata ok (command line is root=/dev/sda3 video=vesafb:1024x768-32@85 vga=0x318 splash=verbose,theme:sabine_inv)
Linux version 2.6.13-gentoo-r5 (root@Balrog) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7. ) #10 SMP Sun Dec 11 16:19:41 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f6f90
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000001fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000001fff3040
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000001fff7c40
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000001fff7bc0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
On node 0 totalpages: 130959
DMA zone: 3999 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:b0000000)
Checking aperture...
CPU 0: aperture @ 1580000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/sda3 video=vesafb:1024x768-32@85 vga=0x318 splash=verbose,theme:sabine_inv
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2010.348 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 507632k/524224k available (3294k kernel code, 15828k reserved, 1858k data, 216k init)
Calibrating delay using timer specific routine.. 4024.91 BogoMIPS (lpj=8049820)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.564 MHz APIC timer.
Brought up 1 CPUs
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 1 *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: f8000000-f80fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: f0000000-f7ffffff
PREFETCH window: e0000000-efffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.23 [Flags: R/W].
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 6144k, total 262144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 8 throttling states)
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
Probing IDE interface ide1...
hdd: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdd: ATAPI 79X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
sata_nv version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 217
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 217
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
Vendor: ATA Model: ST3808110AS Rev: 2AAA
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE000 irq 225
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE008 irq 225
ata3: no device found (phy stat 00000000)
scsi2 : sata_nv
ata4: no device found (phy stat 00000000)
scsi3 : sata_nv
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Fusion MPT base driver 3.03.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.02
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 233, io mem 0xf8105000
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 50, io mem 0xf8103000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v2.3
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-9: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-9
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Intel 810 + AC97 Audio, version 1.01, 18:36:30 Nov 20 2005
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 4, 65536 bytes)
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
EXT3 FS on sda3, internal journal
nvnet: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8776 Mon Oct 16 21:53:43 PDT 2006
Nvsound: Nvidia Audio Init Module, 14:31:11 Nov 11 2006 version 1.0-7
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:04.0 to 64
Nvsound: NVIDIA CK804 Audio aci 0xb000 and ac97 0xac00, IRQ e1
Nvsound: DEV MIXER 0 DEV AUDIO 3
Adding 2040244k swap on /dev/sda2. Priority:-1 extents:1
fbsplash: console 0 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'sabine_inv'
fbsplash: switched splash state to 'on' on console 10
eth0: no IPv6 routers present
usb 1-7: new high speed USB device using ehci_hcd and address 3
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
hub 1-0:1.0: connect-debounce failed, port 9 disabled
Vendor: Hitachi Model: HDT725032VLAT80 Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: assuming drive cache: write through
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: assuming drive cache: write through
sdb:<6>SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
Attached scsi disk sdb at scsi4, channel 0, id 0, lun 0
usb-storage: device scan complete
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142272
Buffer I/O error on device sdb, logical block 78142784
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142272
Buffer I/O error on device sdb, logical block 78142784
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
Buffer I/O error on device sdb, logical block 78142805
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142384
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142384
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142432
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142432
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 625142440
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 8
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 16
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 24
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 32
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 40
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 48
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 56
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 64
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 72
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 80
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 88
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 96
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 104
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 112
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 120
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 128
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 136
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 144
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 152
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 160
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 168
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 176
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 184
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 192
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 200
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 208
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 216
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 224
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 232
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 240
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 248
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 256
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
printk: 67 messages suppressed.
Buffer I/O error on device sdb, logical block 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 8
Buffer I/O error on device sdb, logical block 1
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 16
Buffer I/O error on device sdb, logical block 2
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 24
Buffer I/O error on device sdb, logical block 3
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 32
Buffer I/O error on device sdb, logical block 4
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 40
Buffer I/O error on device sdb, logical block 5
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 48
Buffer I/O error on device sdb, logical block 6
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 56
Buffer I/O error on device sdb, logical block 7
SCSI error : <4 0 0 0> return code = 0x10070000
end_request: I/O error, dev sdb, sector 0
Balrog linux # |
|
| Back to top |
|
|
xraver
Veteran
Joined: 20 Aug 2003
Posts: 1083
Location: Halberstadt
|
|
| Back to top |
|
|
Simonheld
Apprentice
Joined: 20 Nov 2005
Posts: 151
Location: Deepest Black Bavaria
|
| Posted: Fri Jun 15, 2007 1:31 pm Post subject: |
|
|
| usb-stick geht ganz normal ... ich werd mir die wiki-seite anschaun ... vielen dank leute |
|
| Back to top |
|
|
Fauli
l33t
Joined: 24 Apr 2004
Posts: 760
Location: Moers, Germany
|
| Posted: Fri Jun 15, 2007 2:11 pm Post subject: |
|
|
Es kann auch sein, dass der 2.6.13-er Kernel zu alt ist und die USB-Hardware nicht richtig ansteuert. Versuch es doch z. B. mal mit einem aktuellen 2.6.20-er Kernel.
_________________
Do your part to beautify the web! Turn off link underlining! |
|
| Back to top |
|
|
Anarcho
Advocate
Joined: 06 Jun 2004
Posts: 2970
Location: Germany
|
| Posted: Fri Jun 15, 2007 2:24 pm Post subject: |
|
|
| Fauli wrote: | | Es kann auch sein, dass der 2.6.13-er Kernel zu alt ist und die USB-Hardware nicht richtig ansteuert. Versuch es doch z. B. mal mit einem aktuellen 2.6.20-er Kernel. |
Richtig, hatte vor 2 Tagen auch so ein Teil hier. Ich habe den 2.6.21er Kernel installiert, es kann aber auch sein das der 2.6.20er reicht. Darunter geht jedenfalls nichts.
Ich hatte auch zuerst versucht den Patch (unusual_devs.h) manuell auf meinen 2.6.19er zu backen, hatte aber nicht funktioniert. Habe dann auch nicht grossartig weiter getestet.
Dazu kommt aber das das Teil nicht richtig anspringt, braucht ewig. Wir schicken die Platte nun wieder zurück.
_________________
...it's only Rock'n'Roll, but I like it! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
